PDA

View Full Version : ATI Cards


wotek
01-13-2008, 07:21 PM
Hi I've some troubles getting QE/CI on my ATI Radeon x600 (PCIe).
(Managed to change resolution, but still no qe/ci)
Have anyone had some experience with this card or simillar? if so, please share some pointers.

cheers!

wotek
01-13-2008, 09:32 PM
guys really - no one? :)

naquaada
01-13-2008, 11:57 PM
Could you give me the card IDs? You find them in the System Profiler. It is a Mobility Radeon?

uelsk8s
01-14-2008, 12:56 AM
I cant get QE/CI here either
Mobility Radeon x300
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x5460
Revision ID: 0x0000

wotek
01-14-2008, 01:05 AM
Chipset Model: Radeon Mobility X600 (M24) (PCIE)
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x3150
Revision ID: 0x0000
Displays:
Color LCD:
Resolution: 1280 x 800 @ 60 Hz
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

wotek
01-14-2008, 04:03 AM
Hm, I've managed to enable QE/CI using some tips from:http://forum.insanelymac.com/index.php?showtopic=70808&hl=x600&st=160
also used HP.ZD8000series.graphics.extensions, don't remember exacly where i did got it, for sure somewhere on www.insanelymac.com forums.

Bottom line. Xbench Results: 66.40
It seems like I need to buy a new computer :) and for sure it's going to be MBP.

cheers!

ps. can't stop repairing my leopard intall, even when university exam is coming up ;) ( on monday :> ).

wotek
01-14-2008, 06:06 AM
huh,

- cover flow doesn't work
- menubar is 90% transparent
- a lot of mouse tearing.
- not sure if opengl is really working
- movies arent working.

:(

riangeli
01-26-2008, 11:18 PM
Hi! Can somebody tell me how get ATi Radeon X1950 (PCIe) QE/CI work?

i am bored to use only 1024x764 Resolution :(

Display:

Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x7280
Revision ID: 0x009a
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1024 x 768
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

thanks and sorry my bad english!

zephyroth
01-26-2008, 11:22 PM
The pkg on wiki didn't work ?

riangeli
01-26-2008, 11:25 PM
ouh...? can you please give me a link? :D

DoiX
01-26-2008, 11:34 PM
http://osx86.wikidot.com look here :)

riangeli
01-26-2008, 11:47 PM
but where it is? is it Naitit_Uni_1.00-pkg?

zephyroth
01-26-2008, 11:49 PM
http://osx86.wikidot.com/utilities-resources

riangeli
01-26-2008, 11:52 PM
wow! thanks Zeph! this looks promising :D i let you know how it works

zephyroth
01-26-2008, 11:55 PM
I hope it will work for you !

riangeli
01-27-2008, 05:48 PM
Zeph! Do i need to make any changes before install ATI-X19x0.pkg? I installed it succesfully but after reboot
comes complain in natit.kext?

btw. i try installed AzaliaAudio.pkg too but it fails.. it told me to run preflight script for azaliaaudio?

so i dont know is the Ati or Azalia making that natit.kext "error"

zephyroth
01-27-2008, 06:02 PM
you must repair permissions on natit.kext.

chown -R root:wheel /System/Library/Extensions/Natit.kext
chmod -R 755 /System/Library/Extensions/Natit.kext

riangeli
01-27-2008, 06:28 PM
Yes! Its working! but not how i imagined :( why QE/CI is not supported?
but still i´m happy to get 1280x1024 Resolution working :D
Thax Zeph! you are a life saver :)


ATI Radeon X1950 Series:

Chipset Model: ATI Radeon X1950 Series
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x7280
Revision ID: 0x009a
Displays:
VA902 SERIES:
Resolution: 1280 x 1024 @ 60 Hz
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display Connector:
Status: No display connected

btw: Now sound is working too! thanks to ALC888Audio.mpkg!

bushd
02-03-2008, 02:11 AM
does not work with my Sapphire X1950GT 256mb DDR3 PCI-e on Rev.1

after repairing permissions an reboot I got black&white bars on both of my screens (DVI).

FoneBone
02-05-2008, 12:40 AM
Are there any driver out for an older ATI Radeon 9600?

DoiX
02-05-2008, 12:56 AM
try the 9700 driver that comes with leo, just put you pci id :)

FoneBone
02-05-2008, 02:07 AM
would you like to give me a short instruction, please?

DoiX
02-05-2008, 02:11 AM
system/library/extensions/ATIRadeon9700.kext/Content/info.plist/IOKit.../PCIMatch/put your id it should be 0x**** (**** your id)

FoneBone
02-05-2008, 02:23 AM
thx... will try after reinstall of osx ;-)

FoneBone
02-06-2008, 11:02 PM
okay.... now, after i reinstalled osx, i've tried your hint. but i guess it isn't nessessary to change it, cause osx "knows" my graphic card ;-)
maybe there is another hint somewhere out there, which tells me, how to get my finderbar translucent.

thx
FoneBone

FUJICCO
02-16-2008, 08:45 PM
My Radeon X800 GTO works fine about resolusions and refreshrate by using Natit and Callistob008.

But my card was recognized as "RADEON X800 UO" ... :( Why?

And then, Although I used "ATIRADEON9700.kext", it didn't work for my card...no good!
Because I was not able to be supported "Quartz Extreme" on my card...

Anyone, Tell me some successful examples about "RADEON X800 GTO".

Thanks =)

nic01
05-18-2009, 03:19 AM
Hey guys,

i cant get my video card working on mac os 10.5.6 retail.
If this card is supported , I hope someone can provide the needed kext or preconfigure a kext for me that would be very kind.Plan is to update to 10.5.7.
Using the chameleon 2.0 rc1 bootloader.
Don't know if this is the best place to ask .

Vendor : ATI(0x1002)
DeviceID : 0x9490
RevisionID : 0x0000

P.S: pls forgive any mistakes as this isn't my native language.