10.7.4 AMD Kernel - Page 43

gils · #**421** 09-27-2012, 11:40 PM

Quote:

Originally Posted by jeisom

I updated to 10.7.5 and now the screen stops updating after [ PCI Configuration begin ]. I found that it continues and if I boot to single user mode I can type 'halt' and the system halts. Any thoughts on where to start looking. Using a AMD FX-8120 on a ASUS M5A97 EVO with a Galaxy GTX 465.

npci=0x3000 GraphicsEnabler=Yes

gils · #**422** 09-27-2012, 11:42 PM

Quote:

Originally Posted by grahfex

Ok..I've tried yet again to install OS X 10.7.4 INDO.

Success!! However..I am stuck at the same roadblock. I can boot into the system using

busratio=18 cpu=1 npci=0x3000 PCIRootUID=1 -v

any other combination of flags I can boot with too.. like UsekernelCache=No

anyway...when I'm actually in the system I can't for the life of me install ANYTHING! No kexts...packages..nothing! I have a hard drive to swap files between windows and OS X and half the time I can't even copy them over to my OS X drive.

I'm a lot closer to complete system than I was months ago but now I'm just plain stuck...any suggestions??? I'm ALMOST there!!!

tu mélanges tes problèmes !!

jhusly · #**423** 09-28-2012, 03:39 AM

grahfex : what boot flags you used to be able to boot into the installation screen? I have a iNDO 10.7.4 release here but can't boot from it. It always says "Not an intel platform. Restart fix not applied!!"

jeisom · #**424** 09-28-2012, 03:58 PM

Quote:

Originally Posted by gils

npci=0x3000 GraphicsEnabler=Yes

Thanks. Already Tried both. No joy.

EDIT:
Tried again. This time it worked. Thanks

R:A:W:X86 · #**425** 09-28-2012, 05:11 PM

Quote:

Originally Posted by instant idiot

Is this updated kernel different from the one on the first post?

Nope.
First post is up to date - build 30 from 18 Jul is the latest and only recommended to be used.

gils · #**426** 09-28-2012, 10:57 PM

Quote:

Originally Posted by R:A:W:X86

Nope.
First post is up to date - build 30 from 18 Jul is the latest and only recommended to be used.

effectivement , très bon boulot pour ton kernel , fonctionne également magistralement bien pour Lion 10.7.5 .

Godofwar · #**427** 10-01-2012, 05:46 AM

Do you guys think I need a different Kernel for my Mach Kernel? Sometimes command -legacy busratio=17 UsekernelCache=No npci=0x3000 PCIRootUID=0 Graphics Enabler=Yes does not work! I'm using Mach Kernel v4 with a Amd Phenom II x4 965 3.4ghz and gigabyte gtx 570 card with 4 gigs of ddr3 ram. Motherboard is Asus M4A79XTD EVO. That or maybe I need a different command. My Hackintosh Lion acts very strange. I have to shut my computer down like 3 times before the command finally works, why the heck would that be?

instant idiot · #**428** 10-01-2012, 05:55 AM

Godofwar, If you're still using Bronzovka's kernel, you should definitely replace it with R:A:W:X86's kernel from the first post on this page.

Also, you can put all those kernel flags in the <Kernel Flags> section of /Extra/org.chameleon.Boot.plist.

Godofwar · #**429** 10-01-2012, 06:08 AM

Quote:

Originally Posted by instant idiot

Godofwar, If you're still using Bronzovka's kernel, you should definitely replace it with R:A:W:X86's kernel from the first post on this page.

Also, you can put all those kernel flags in the <Kernel Flags> section of /Extra/org.chameleon.Boot.plist.

I'm on 10.7.2, I do not want to update because I fear that my hackintosh won't work at all and I'm sick of reinstalling Snow Leopard and setting Lion up all over again. I've done that hundreds of time already. Does R:A:W:X86's work with 10.7.2 or no?

Also, I accidently posted on this topic.

Oh yeah, can I replace that kernel while I'm on Hackintosh Lion Or do I have to replace it while I'm on my Windows 7 side? And if I have to do it on my Windows 7 side, what program to you recommend I use so I can read/write to my Mac side?

The Connactic · #**430** 10-01-2012, 06:34 AM

You can simply rename the RAWX86's kernel to, say, RAW, before putting it at the root of your Lion system. Doing that, you won't need to replace the older one (that's named mach_kernel) and will be able to use it if the things go wrong and RAWX86's kernel doesn't work with your current 10.7.2 installation.

If you do as i advised, just remember to boot using the name you gave to the kernel as a boot flag. If you call it RAW, just type RAW and, just for safety, npci=0x3000 and hit enter. If you want to boot with your older kernel, just doesn't type anything.