Unless you have either an Intel or an AMD FX/Bulldozer,
the lion installation DVD/UFD won't be able to boot properly due to the lack of 64-bits kernel support for AMD Athlon & Phenom (cmiiw)

So you have to install it by running the modified OSInstall.mpkg of lion distros (i.e. iATKOS L or BLANGSAK v3) within an existing Snow-Leo
or you can also restore a partition image of a pre-installed lion (retail or distros) using the Disk Utility

hello, R:A:W:X86

actually, I found these strange assertions, the fact that with different flags or x86_64-force64, it only works in 32 bit, but hey.

I tested this kernel on my old server dual Xeon HT 32 bit, it does not start.

---

Macmini early 2006 /blanGsak 10.7.2
Acer 8930 G / core2duo T6500 / NV 9600 GS m / Lion 10.7.3 / ML 10.8.2 / w7/8
Asus M5A97pro / FX 8350 / Asus HD 7950 CUII v2
GA-78LMT SP2 / FX 6100 / P x4 960t / Sapphire HD 4850 1024
MSI K9neo v1 / Atlon 4800+/ Gigabyte HD 5450 512
test kernel 12.0 AMD

Tuto : http://www.hack-my-mac.fr/index.php/...fx-buldo#28896

CG opérationnelle : HD 5450 512 / HD 4850 1 / GT 610

yep!

this does not surprise me that modbin_kernel darwin running on version 10.0 of SL darwin10.8 course in 32 bit.

---

Macmini early 2006 /blanGsak 10.7.2
Acer 8930 G / core2duo T6500 / NV 9600 GS m / Lion 10.7.3 / ML 10.8.2 / w7/8
Asus M5A97pro / FX 8350 / Asus HD 7950 CUII v2
GA-78LMT SP2 / FX 6100 / P x4 960t / Sapphire HD 4850 1024
MSI K9neo v1 / Atlon 4800+/ Gigabyte HD 5450 512
test kernel 12.0 AMD

Tuto : http://www.hack-my-mac.fr/index.php/...fx-buldo#28896

CG opérationnelle : HD 5450 512 / HD 4850 1 / GT 610

I took the OSInstall.mpkg and the OSInstall file of the iAtkos L1 and i put them to my Lion USB, but still the same.

@erineos
You don´t have to change something on a kext for sb700 chipset if you are using SATA with AHCI.
The AppleATIATA.kext is for IDE and not for SATA with AHCI.

For SATA the IOAHCIFamily is going to be used.

So delete the changed AppleATIATA.kext!!

If the installation will not work it could be a possibilty to clone a already installed Lion.

@erineos

if you had read my previous reply thoroughly!
then you wouldn't get the same launchd KP no more

instead of copying the OSInstall.mpkg to your Lion UFD (=USB Flash Drive),
you should OPEN & RUN it directly with either Finder or Terminal within your existing pre-installed Snow-Leo 10.6.x



About the sb7xx chipset:

it depends on what setting you choose for your SATA controller





for both SATA=AHCI & SATA=RAID : you can use the stock kext

for SATA=Standard / Native IDE : it requires an additional modified kext,
i.e. AppleATIATA or AppleVIAATA

Sorry about this m28ew, i was so tired from the continus efforts to make it work.
So you mean that i rather have two options:
1. install iAtkos L from it's OSInstall.mpkg inside my Snow Leo to a partition,
2. Install retail Lion to a HDD of an Intel PC, put the mach kernel of this topic to the root and connect the HDD to my AMD PC?

I have installed iAtkos L1 from its OSInstall.mpkg inside my Snow Leo to another partition, but i am stuck to the "Waiting for DSMOS". What i must do? Thanks a lot everybody once again!

HI @ll

here a new problem!!!

The last days I modified my NVIDIA Grafik driver, I accept that an error is suffused to me. Now I receive a funny error message with start from LION

10.7.4! I investigated in the Internet and nothing found, which continues to help to repair. Perhaps does someone have an idea?

1. Problem “kernel: smb_treeconnect_internal: Malformed tree connect with A bath word COUNTs! wc= 2” see below --->
2. The annoying CPU panic message, which comes during the enterprise of LION applications and to start me again forces!
Can someone to me possibly explain which the individual messages for a meaning to have????



...............
NTFS Volumme name Mac Data, version 3.1

com.apple.launched 1 com.apple.correservices.applied.authentication 108 Exit timeout elapsed (20 seconds). Killing

smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2


IN CASE READ THERE HAS BEEN A KERNEL PANIC. THERE IS NO ----ING SUPPORT FOR RUNNING LION ON AMD. SO YOU LL HAVE FIX THIS YOURSELF.


panic(cpu 0 caller 0X2cfddf): Kernel trap at 0x002f76e7, type 17=page fault, registers:
CRO: 0x80010033, CR2: 0x00000124, CR3: 0x00101000, CR4: 0x00000660
ERX: 0x21000000, EBX: 0x00000000, ECX: 0x00000100, EDX: 0x00000001
CR2: 0x00010124, EBP: 0x8344b808, ESI: 0x202e74a0, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x002f76e7, CS: 0x00000004, DS: 0x0000000c
Error code: 0x00000000

Debugger called: (panic)
Backtrace (cpu 0), Frame : Return Adress (4 potential args on stack)
0x8344b6b8 : 0x2203ea (0x719156 0x8344b6d8 0x229fc0 0x0)
0x8344b6b8 : 0x2cfddf (0x6be9e4 0x2f76e7 0xe 0x6be98d)
0x8344b798 : 0x2c2c02 (0x8344b7b8 0x8344b7a8 0x8344b7b0 0x568812)
0x8344b7b0 : 0x2f8ff1 (0xe 0x48 0x70 0xc)
0x8344b808 : 0x2f8ff1 (0x15427e80 0x0 0x8344b848 0x329713)
0x8344b848 : 0x30d69e (0x202e74a0 0x0 0x0 0x0)
0x8344b898 : 0x30d1bf (0x15427df0 0x37634538 0x0 0x0)
0x8344b8d8 : 0x30f4d0 (0x1 0x0 0x4fe519bc 0x4fe519bc)
0x8344b938 : 0x4f9f39 (0x0 0x34 0x8344b980 0x202e56b0)
0x8344b9c8 : 0x5025b3 (0x16525804 0x202e1314 0x8344be60 0x8344bb00)
0x8344bb28 : 0x32dec1 (0x8344bb48 0x0 0x8344bb68 0x6a5ae8)
0x8344bb68 : 0x304927 (0x202e1314 0x8344bd4c 0x8344be60 0x160fd70c)
0x8344bbc8 : 0x303630 (0x8344bd30 0x0 0x15720800 0x400)
0x8344bc38 : 0x32317b (0x8344bd30 0x15cf2d8c 0x150e17f0 0x0)
0x8344bc98 : 0x31bb20 (0x8344bd30 0x8344bcf8 0x8344be90 0x160fd70c)
0x8344bd08 : 0x31c12d (0x160fd70c 0x8344bd30 0x0 0x8344be90)
0x8344bf88 : 0x5f36cb (0x15cd1828 0x160fd60c 0x160fd650 0xc)
0x8344bfc8 : 0x2c3137 (0x1601ad5c 0x0 0x4 0x246)

BSD process name corresponding to current thread: mdworker
Boot args: boot-uuid=034D684-4663-3CD9-856D-CBAE7B8CE287 rd=*uuid -legacy -force64 userkernelcache=no .v .f npci=0x2000

Mac OS version:
11E53

Kernel version:
Darwin Kernel Version 11.4.0: Sa 19 Mai 2012 08:08:44:CEST: bronzovka v3 rev B:xnu-1699.26.8/BUILD/obj/RELEASE_I386
Kernel UUID: 29B5CB24-2DD0-3E9C-8967-104037044578
System model: MacPro5,1

System uptime in nanoseconds: 641097053904

how does one turn the CPU off Panic error message in the long term? Possibly patch write one or adapt the DSDT???? Ask for urgent assistance

PS: the stupid sentence of bronzovka is naturally not new

---

Mainboard:
GA-990FXA-UD3
Realtek PCIe GBE Family Controller
Realtek High Definition Audio
CPU: AMD Phenom II X6 1100T
RAM: 16 GB Corsair DDR3 1600 C9
NVIDIA Geforce GTX 550 TI 3072 MB
DVD SATA
HDD:
Segate 2 TB
WD 320 GB
WD 500 GB
-----------------------------------------------------
Windows 7 Ultimate 64-Bit
Snow Leopard 10.6.8
Lion 10.7.2
Lion 10.7.4

HOW-TO look here

Hello , frisco2

c'est quand que tu nous met tes images sur ce site du mode 64 bit !!!!

Sur ton site , elles sont tellement petites que l'on ne voit rien !! lol lol lol

---

Macmini early 2006 /blanGsak 10.7.2
Acer 8930 G / core2duo T6500 / NV 9600 GS m / Lion 10.7.3 / ML 10.8.2 / w7/8
Asus M5A97pro / FX 8350 / Asus HD 7950 CUII v2
GA-78LMT SP2 / FX 6100 / P x4 960t / Sapphire HD 4850 1024
MSI K9neo v1 / Atlon 4800+/ Gigabyte HD 5450 512
test kernel 12.0 AMD

Tuto : http://www.hack-my-mac.fr/index.php/...fx-buldo#28896

CG opérationnelle : HD 5450 512 / HD 4850 1 / GT 610

any news about the permissions?