Lion with AMD - Page 105

spidy86 · #**1041** 06-27-2012, 04:24 PM

as told i tried this
boot: -legacy -v PCIRootUID=1
didnt worked, still same problem

gils · #**1042** 06-27-2012, 05:46 PM

Quote:

Originally Posted by spidy86

as told i tried this
boot: -legacy -v PCIRootUID=1
didnt worked, still same problem

hello ,

bizarre !?

c'est quoi ta carte graphique ?

frisco2 · #**1043** 06-28-2012, 12:11 AM

Quote:

Originally Posted by gils

C'est ta CG qui bloque , essayes PCIRootUID=1

probably with your system the FakeSMC.kext is loaded or it is not installed. Importantly which you installed the correct version and which installation place. If you start Lion with usekernelcache=yes, also the Kexte must lie in /S/L/E, since otherwise Lion ignores the drivers in /E/E. If you with usekernelcache=No start then must all drivers in S/L/E lie!! If your system to the same places stops then deletes intelcpupowermenagment.kext from S/L/E and takes the SleepEnabler: kext with nullpowermanagement.kext then it should actually start. I had also had the same problem

spidy86 · #**1044** 06-28-2012, 07:50 AM

Gils.........My graphic card is ATI 4350 (512 MB) MSI Build.

frisco2........i used iATKOS L2 provided fakesmc,
ok as ive understood ill try this.........
Step 1. delete intelcpupowermenagment.kext from S/L/E and replace with nullpowermanagement.kext and SleepEnabler: kext
Step 2. i will check my fakesmc is in S/L/E

anyways this is how i installed my Lion............plz see if its all ok!
i had a working snow leopard 10.6.8 in snowleo partition with chameleon bootloader + legacy kernel
enabled show hidden files.........installed iATKOS L2 with OSinstall.mpkg to Lion partition

Unchecked: BootLoader Options
1. Graphics Enabler
2. Built-In Ethernet

Checked following :
1. FakeSMC
2. Disabler
3. RTC
4. EVOreboot
5. AHCISATA
6. AppleHDA
7. HDA8xx Enabler
8. Realtek RTL8111/8168

then replaced mach_kernel with Brazonka's-v4 made the new kernel invisible, and replaced finder
Upgraded Chameleon to 2.1

tried booting with : -legacy -v arch=i386 npci=0x2000
-legacy -v arch=i386 npci=0x3000
-legacy usekernelcache=no -v -f

My Specs for SNOW LEOPARD:
Mobo: AMD 890GXM-G65, BIOS - v1.11, mfg: MSI, Proc: PhenomII X4 955, 3.2GHz Black Edition
Graph: Inbuilt ATI Radeon HD 4290 + ATI Radeon HD 4350, 512MB DDR2 (mfg: MSI) working, with Green Apple = OpenGL issues! DVI 2 HDMI cable for 32" LCDTV with analog sound, DeviceID: 0x954F1002 added to ATI4600.kext
Audio: Realtek ALC889 Chipset, 7.1, N/W: Realtek PCI-E GbLAN controller 8111DL

frisco2 · #**1045** 06-28-2012, 12:38 PM

Quote:

Originally Posted by spidy86

Gils.........My graphic card is ATI 4350 (512 MB) MSI Build.

frisco2........i used iATKOS L2 provided fakesmc,
ok as ive understood ill try this.........
Step 1. delete intelcpupowermenagment.kext from S/L/E and replace with nullpowermanagement.kext and SleepEnabler: kext
Step 2. i will check my fakesmc is in S/L/E

anyways this is how i installed my Lion............plz see if its all ok!
i had a working snow leopard 10.6.8 in snowleo partition with chameleon bootloader + legacy kernel
enabled show hidden files.........installed iATKOS L2 with OSinstall.mpkg to Lion partition

Unchecked: BootLoader Options
1. Graphics Enabler
2. Built-In Ethernet

Checked following :
1. FakeSMC
2. Disabler
3. RTC
4. EVOreboot
5. AHCISATA
6. AppleHDA
7. HDA8xx Enabler
8. Realtek RTL8111/8168

then replaced mach_kernel with Brazonka's-v4 made the new kernel invisible, and replaced finder
Upgraded Chameleon to 2.1

tried booting with : -legacy -v arch=i386 npci=0x2000
-legacy -v arch=i386 npci=0x3000
-legacy usekernelcache=no -v -f

My Specs for SNOW LEOPARD:
Mobo: AMD 890GXM-G65, BIOS - v1.11, mfg: MSI, Proc: PhenomII X4 955, 3.2GHz Black Edition
Graph: Inbuilt ATI Radeon HD 4290 + ATI Radeon HD 4350, 512MB DDR2 (mfg: MSI) working, with Green Apple = OpenGL issues! DVI 2 HDMI cable for 32" LCDTV with analog sound, DeviceID: 0x954F1002 added to ATI4600.kext
Audio: Realtek ALC889 Chipset, 7.1, N/W: Realtek PCI-E GbLAN controller 8111DL

Do you come in the system? Otherwise, then put your iATKOS L2- DVD into your DVD drive and boots with: - legacy - force64 UserkernelCache=No - v - f !!!!!!!

gils · #**1046** 06-28-2012, 09:54 PM

hello ,

Merci d'utiliser la traduction google .

Je viens de tester la distro blanGsak v4 équipé de kernel AMD traité sur ce site , pour confirmer le non boot sur les processeurs AMD k10 en 32 bit et encore moins 64 bit comme prêtant frisco2 !!

j'ai testé tout les kernel AMD de la distro et aucun ne fonctionne en installation direct via USB/DVD ou machine virtuelle VTBox .

ceci dit , je penses qu'il y a une chance pour les FX !? n'en possédant pas , je n'ai pas pu faire de test .

voici quelques images :

Comme vous pouvez le voir , la distro est assez riche en kernel , atom , ivybridge etc ..........

Egalement , elle est très bien fourni en patch divers .

Très bon boulot !! sauf pour AMD !! dommage !!!

A suivre ................

spidy86 · #**1047** 06-29-2012, 09:18 AM

gils can u tell me the steps u took for your 10.7 installation on Asus M5A97PRO / Phenom x4 960t /

frisco2 · #**1048** 06-29-2012, 12:13 PM

HI GILS,

sag mal kannst du programmieren?
Wenn Ja?, dann habe ich einen Vorschlag um K10 Probleme zu beheben.

frisco2 · #**1049** 06-29-2012, 12:22 PM

Hi.GILS,

dire peuvent tu programmer fois ?
Si oui ? alors j'ai à réparer une proposition autour de K10 de problèmes.

j'ai aussi essayé la version, l'obtiens moi cours aussi.

effectuer une recherche sur Google traduit

gils · #**1050** 06-29-2012, 03:56 PM

@frisco2

hallo,

Es ist wahr, dass die Google-Übersetzung nicht groß ist, habe ich nicht alles verstehen?
Welches Programm sprichst du? Handel und was Sie erreichen wollen?
ist es am besten, dass Sie Ihren Job mit jedem teilen, wie Dimitrik, R:A:W:X86, Nawcom's -und andere.
Ich persönlich habe mehrere operative Mhac und ich glaube nicht nach einem AMD laufen auf Mac OS X arbeiten
Wenn ich helfen kann, wird es mit Freude und Leidenschaft sein.

Denn jetzt gibt es keine Lösung für den Einbau direkt, ich hoffe, es sich entwickeln wird.