View Single Post
 
Old 02-14-2012, 12:21 PM
andyvand's Avatar
andyvand andyvand is offline
 
Join Date: Apr 2009
Location: Tienen
Posts: 515
Quote:
Originally Posted by molonam View Post
Hi Andy !!

I'm using both your fix and the DeviceMergeNub on a netbook n450 where i've just uptaded to 10.6.8 and where I can not activate the airport, till 10.6.7 I had service but since the upgrade I can not activate more the airport the kext that worked till 10.6.7 not works on 10.6.8 the fact is that the wificard it's not recognized. It seems that the kext is dead. This kext was picked from kexts.com that one dated on october 2010.

I've started on SL using a 10.6.2 Hazard then using a combo to upgrade to 10.6.5 then I've updated to 10.6.6 using a delta and then updating to 10.6.7 using a delta too. Usually then every update I must to reinstall the netbookinstaller from Meklort

With your fix kext the wificard it's recognized but I can not set the country with the DeviceMergeNub the country its set to X0 and the Regional Configuration to FCC when the RC that worked was APAC (I'm in SPAIN) you can see the information extracted from a comparative of several Profile System on my System.

USING DEVICEMERGENUB_Atheros (last) (10.6.8)

Versiones de software:
Menú Extra: 6.2.2 (622.2)
Módulo configd: 6.2.5 (625.6)
Perfil de Sistema: 6.0.1 (601.1)
Preferencia de red: 6.2.2 (622.2)
Utilidad AirPort: 5.5.2 (552.11)
Familia IO80211: 3.1.2 (312)
Interfaces:
en0:
Tipo de tarjeta: AirPort Extreme (0x168C, 0x8F)
Versión del firmware: Atheros 9285: 2.1.14.5
Configuración regional: FCC <<< how to fix this ?
Código del país: X0 <<<<< how to fix this ?
Modos PHY compatibles: 802.11 b/g/n
Canales admitidos: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake on Wireless: Compatible
Estado: Servicio de red inactivo

ONLY _USING FIX_ KEXT (10.6.8)

Versiones de software:
Menú Extra: 6.2.2 (622.2)
Módulo configd: 6.2.5 (625.6)
Perfil de Sistema: 6.0.1 (601.1)
Preferencia de red: 6.2.2 (622.2)
Utilidad AirPort: 5.5.2 (552.11)
Familia IO80211: 3.1.2 (312)
Interfaces:
en0:
Tipo de tarjeta: AirPort Extreme (0x168C, 0xE025)
Versión del firmware: Atheros 9285: 2.1.14.5
Configuración regional: APAC
Código del país: <<<<<< how to fix this ???
Modos PHY compatibles: 802.11 b/g/n
Canales admitidos: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake on Wireless: Compatible
Estado: Servicio de red inactivo

OLD ONE (10.6.7)
Versiones de software:
Menú Extra: 6.2.1 (621.1)
Módulo configd: 6.2.4 (624.2)
Perfil de Sistema: 6.0 (600.9)
Preferencia de red: 6.2.1 (621.1)
Utilidad AirPort: 5.5.2 (552.11)
Familia IO80211: 3.1.4 (314.1.1)
Interfaces:
en0:
Tipo de tarjeta: AirPort Extreme (0x168C, 0xE025)
Versión del firmware: Atheros 9285: 2.1.14.5
Configuración regional: APAC
Código del país: ES
Modos PHY compatibles: 802.11 b/g/n
Canales admitidos: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Wake on Wireless: Compatible
Estado: Conectado

So where can I find the string to set my country and regional configuration on your DeviceMergeNub ? It seems to me that using it slows a bit the system TIA
In the Info.plist, use a plist editor to edit it.
You can get it by right clicking on DeviceMergeNub.kext, show contents.
Next navigate to Contents.
Hope this helps you...
Reply With Quote