#1
|
|||
|
|||
Help installing Snow Leopard
Hi,
Hope you guys can provide some assistance. I'm having problems installing Snow Leopard. I downloaded the Snow Leopard Torrent by Hazard and unzip it. I then proceed it to burn the iso onto a DVD and tried booting off it. However, after burning the iso, I end up with 8 files totaling less than 200kb which doesnt make sense since the iso is 4.37GB. I'm using Nero, and I can find the setting to lower the write speed to 4x. I also tried copying the image to my 8GB usb stick and i get a message that the my usb stick is not large enough for the iso file. I also tried installing ideneb 10.5.7 and Im able to get to the screen where you pick the language, but as luck would have it, my mouse or keyboard dont work. Below are my specs: AMD Phenom II X4 940 Gigabyte MA790X-UD4P 4GB Corsair DDR2 ATI Radeon HD4650 1TB Hitachi Sata drive. I currently have a triple boot: XP (has its own drive) Windows 7 (installed on the Hitachi Drive) Gentoo ( has its own drive) I plan to install Snow Leopard on the Hitachi Drive. I'm using Grub to boot all three Operating systems. Thanks. |
#2
|
|||
|
|||
MacOS discs often have dual filesystems -- one ISO-9660 and one HFS or HFS+. When you view such a disc in most non-Mac OSes, you'll see the ISO-9660 filesystem, which may give you access to few or none of the HFS/HFS+ files. This certainly seems to be the case with the Hazard disc; on my system, the ISO-9660 filesystem totals just 192KB in size, but it does install correctly, and in Linux (or OS X, of course), I can mount the HFS+ side and see 4.4GB of files.
Thus, I recommend you try booting the disc and see what happens. If you can't boot it, then post back with details about what happens when you try. |
#3
|
||||
|
||||
As for the other Distro you installed it sounds like you need eiather PS2 fix or a USB 2.0 fix to get your keyboard/mouse working depending on what type you use.
00010 RETIRED |
#4
|
|||
|
|||
00010
Thanks for the reply. The other distro is ideneb 10.5.7 and I never really got a chance to install it as I could not get pass the language selection screen. srs5694, I have tried booting off the dvd with no success. As soon as the screen that tells you to hit enter to load darwin, my computer reboots. I will try again. I've read that you need to burn the iso at 4x...is this accurate? I tried changing the writing speed in nero but could not find the setting. thanks to you both for your suggestions. I will post back with more info. |
#5
|
||||
|
||||
Why not inject a PS2 kext in the ISO image before you burn so that it installs it aswell with the other kext files so you can use your PS2 keyboard and mouse, unless the iDeneb DVD already has that option in the installer.
00010 RETIRED |
#6
|
|||
|
|||
00010
The thought did cross my mind. Is it as simple as putting the kext and iso file in a folder and then burning them onto a dvd? I've read of patching, so maybe I need to download patch-o-matic ( the name could be wrong) in order to patch the iso file with the proper kexts? If I were to successfully install ideneb 10.5.7 on my system, what are the chances of then upgrading to 10.6? I would like to avoid installing 10.5.7 only to find out later that I can update to snow leopard? thanks again for your help. |
#7
|
||||
|
||||
You can upgrade from leopard to snow leopard, but it would be better to just do a clean install, I suggest downloading and installing SnowOSX Universal 3.6, that already has PS2 kexts but you have to select them from the "Customize" menu during install.
It also has PS2 drivers on boot aswell so your PS2 keyboard and mouse will work when you use the installation DVD. 0010 RETIRED |
#8
|
|||
|
|||
Thanks for the suggestion. I'm downloading snowosx now and will report back later. This computer is a new build, but I was able to install ideneb 10.5.5 on an AMD dual core system a few months back. Correct me if I'm wrong, but you are supposed to create the partition prior to booting off the dvd as the disk utility will not see/find your disk unless it has been partitoned correct?
|
#9
|
|||
|
|||
Hi, just as a suggestion i would personally burn the iso using imgburn as i have found in the past that nero is not that good at burning the iso images correctly. also as your first post indicates you are only getting a small part of the image 200mb of the 4.7GB this also suggests that nero failed to burn the iso correctly.
You can get imgburn from there web site its free and less cumbersome than nero. http://www.imgburn.com/ Raz PC,(dual boot with ultimate edition 2.4 and IPC 10.5.6 final) asrock AliveNF6G-GLAN cpu, AMD Athlonx2 7750 2.7ghz (black edition) ram, 4Gb DDR2 800mhz lan, realtek rtl8211b( use nforcelan driver) sound, on board (ALC662) HD audio (voodoohda.kext) gpu, Nvidia 8400gs (512mb) HDD, x2, 250Gb + 320Gb sata Wireless keyboard (HID device) FK760 (integrated trackball mouse) |
#10
|
|||
|
|||
razy60,
Thanks for the suggestion. I will download imgburn and give it a go. 00010, I downloaded snowosx universal 3.5 as I could not find version 3.6 and encountered the same problem. After booting off the dvd, it would always crash when loading system libraries and then a hard restart would follow. I tried setting different flags such as "-v cpus=1" & "-v busratio=20 cpus=1" with no luck. I will try reburning the image at a slower speed and see if that makes any difference. Thanks 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |