hi i am from Argentina, did not speak English.
I'm using google translator sorry if I do not understand.
I want to install snow leopard 10.6.3 on my laptop toshiba L635-Sp3003L

in the language selection screen does not work my keyboard and mouse

start in verbose mode (-v) but it says "The IOUSBFamily Was Not Able to enumerate a device"

Can you help?

Specifications of my laptop:

Processor: Core i5 450m
Chipset: HM55
Graphics: Intel HD Graphics
Memory: 4 gb ram ddr3
Hard Disk: 500 GB

I hope your help, Thanks.

Hi all,

I have been searching high and low for a solution to get OSx to boot on my machine. I have tried a number of distros, Hazard's. iDeneb 1.6- 10.5.8, and most recently SnowOSX3.6, All were able to install however i would always get a kernel panic when i try to boot the system. I have to use a boot cd iBoot or nawcom to attempt the startup, but osx never starts. I have a hard time finding any posts with the config used on my specific system. The closest i have come to sucess was after installing SnowOSX3.6, i was getting a panic from AppleFWOHCI, so i removed the FireWire kext from the /Library/Extensions folder and tha solved that problem. However i got a new panc (cpu 0 caller 0x2a7e57) Kernel trap at 0x5d446c07.

Here are my Laptop Specs:

Intel® Core™2 Duo processor P7350 (2.0GHz, 1066MHz FSB, L1 Cache 32KB/32KB, L2 Cache 3MB)

Memory:

Standard Memory: 2 x 2GB DDR2 (800MHz)

Graphics Controller

ATI Mobility Radeon HD 3650
Video Memory: 512MB dedicated VRAM

@kozzbc You need to find out what kernel is on the install DVD, and make sure you install that kernel so at next boot it will boot just as the DVD did, I am not too sure about graphics card compatibility though...

00010

---

RETIRED

@locopro870 Your system seems ok, graphics may be an issue though... Try Hazard'd Distro and boot with the -v boot flag and post results...

00010

---

RETIRED

Hello,

Thanks for your response!

I have installed.

- Update to version 1.8 bios
- Download iBoot
- Use original 1.6 Snow leopard.

WebCam - OK
Touchpad - OK
Sound OK
USB - OK
Ethernet - OK
Wi Fi - NO
Video - NO




Now my problem is:

1) lack the video and wifi kexts.

when I install the kexts and reboot does not start.

Use kext helper and terminal

2) When I'm updating
to 10.6.5 or 10.6.4
I have Kernel panic
I can´t finish installation

3) install multibeast and restarted after chamaleon logo.
use-v busratio = 18-x
I can´t boot from disk

none works

please help!

Thank you for the reply, I have succesfully installed and booted the OSx3.6 dvd 10.6.5, after removing the firewire entries from the /System/Library/Extensions as before, The new problem I am having is that i cant get any internet access or Graphics to work, I have only attempted to figure out the ethernet, My adapter is a Marvell Yukon 88E804T, no sucess yet, I am hoping that the Osx Tools will find and download any missing drivers i might need once i get online. So about finding out what kernel is booting i can assume that i need to type -v and look for the Darwin kernel number when i boot from dvd, then install the same one under the customize install menu. Would it be easier to buy/borrow a usb wifi sick to initally gain internet access then run the scan hardware and install driver app from osx 86 tools?

Any advice will be greatly appreciated

Hello

Successfully install the update 10.6.5!

My problem now is:

Install kext from Intel HD Graphics

and after restart

the screen goes black

How I can fix it?

---

RETIRED

The best and most universal kernel is the latest Voodoo Kernel but if I remember there is no on the fly CPUID patching for AMD systems yet on Snow Leopard but its been a loooooong time since I have checked... But most pre-patched installer DVD use the Voodoo Kernel by default.

00010

---

RETIRED

Here is my complete extensions folder for Toshiba Satellite L305-S5962 running OSX86 10.5.8 (leopard) from ideneb v1.6 lite. I used the voodoo kernel if it matters. All kexts have been edited, all devices are working (no DVD video playback) and system is rock solid.

www.pandpinc.com/L305-S5962.zip

Only thing you will need to install is the realtek USB WLAN utility, google for a download link.

Once installed configure your wired and wireless network controllers to static ip, then duplicate the service and set the copy to DHCP. This will enable DHCP. I think LAN has to be plugged in on startup to work.

The devices supported:
8101 Realtek LAN
8187 Realtek WLAN
GMA4500m/GMAX3100 graphics (DVD video playback isnt working)
Media Card Reader
USB
Audio
ect.