Hi,
Can anybody help me please. If there a Step by Step guide to Update my amd IPC 10.5.6 to 10.5.7.
I'M SO HELPLESS about Updates...
... For exsample... What is seatbelt.kext.

If It's Possible me by Puttabong can help in German...
or Anybody else

So, Thanks so much
Aljonama

There You go :

Before you start : Download Andy's 9.6.0 kernel package. search the forum for link.

1. Open the terminal.
2. Browse into main directory of your Mac OS partition.
" cd /Volumes/name_of_partition "
" ls -l "
3. You should see a file named "mach_kernel" there. Make a backup of it.
" cp mach_kernel mach_kernel_old "
4. Repair its permissions.
" sudo chmod -R 755 mach_kernel_old "
" sudo chown -R 0:0 mach_kernel_old "
5. Now you can run Software Update, and get your update.
6. After the update - restart your computer.
7. While booting, press F8 and write :
" mach_kernel_old -x "
8. When your computer boots up in safe mode - just install Andy's package.
9. Restart and boot normally.
10. You have 10.5.7 running.

Well, that's it. You can of course make a backup of System.kext aswell, then instead of booting into safe mode and installing Andy's kernel - you can boot into -s mode and copy back the System.kext ( and repair permissions ), but i find this way more convenient.

PS. seatbelt.kext is needed on 10.5.6 to mount USB/DMG properly. Without it your system may fail to mount usb drives or images, or kernel panic at you when you try to do it.

---

www.ultimae.com
Panoramic music, for panoramic people.

AMD Phenom II X6 3.5Ghz
AMD 990FX Chipset
Kingston HyperX 16GB 1600Mhz
AMD Radeon HD6850 X2 CrossFire
Seagate Barracuda Green 2TB

The first thing you should find out is if you can run the vanilla kernel or you need the voodoo kernel. You dont state your config so its hard to give any advice. If you are running vanilla 10.5.6 you should be able to update to 10.5.7 without using another kernel. If not you would need to do something as what Taisto suggests.
seatbelt.kext usually needs to be kept in sync (same versions) as the kernel to avoid problems
Also if you are using a specific (patched) kext for your hard drive controller you need to be sure it doesnt get overwritten by the updates.

... Thanks so much Taisto and thorazine74 for this quick answer.
I will try the traed from Taisto.

thanks again aljonama.

P.S. sorry my english

sorry but Im to stupid to find Andy's 9.6.0 kernel Pack. Please help my again...

Hi aljonama,

Please post your hardware specifications.

By the way, here's the link to Andy's 9.6.0 kernel: http://www.infinitemac.com/f36/9-6-0...-voodoo-t1858/

ive also got ipc 10.5.6 and cant update to 10.5.7...
tryed various soulutions, and this one here as the latest, but with no luck...
i always get the still waiting for root device... tryed various solutions for that too with no luck...
im no expert, but is there some kexts that i can remove from the update the fu..s my system up...? ive tryed with the ideneb 10.5.7 update also...

im considering going for a retail type install, anyone who can tell me if my motherboard will support this...?

---

Mac OSX 10.6.3 (Vanilla)
Gigabyte GA-EP45-DS3LR, P45, Socket-775, ATX, ICH10R, GbLAN, DDR2, PCI-Ex(2.0)x16 MotherBoard
Intel® Core™2 Duo E7500 2,93GHz CPU
6GB DDR2 RAM
ASUS GeForce 9600GT 1GB PhysX CUDA GPU

i use vanilla kernel.

i downloaded the combo update from apple (which i used on my real mac too). installed it on the hackintosh. rebooted. it failed. i rebooted ran -v on bootloader to figure out why. it successfully boots. my board is an intel dg31pr so i had to patch my sound card again. other than that 10.5.7 is running.

Thanx, works great, but when I log in it starts Image Capturing device, i dont know why?

And still cant get my IC/QE working

maybe because you have your iPod touch connected or an Imaging device connected,

for the CI/QE just try to find drivers for your graphics card, my Intel GMA 900(yeas thats a stock card) is fully working (and im on 10.5.7

Intel GMA 900:

Chipset Model: GMA 900
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x2582
Revision ID: 0x0004
Displays:
Display Connector:
Status: No Display Connected
FPD1760:
Resolution: 1280 x 1024 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
QuartzGL: Supported

---