got a problem after installing kernel_9.2_sleep yesterday

i don't know what kernel was there earlier.i used zep's AMD 10.5.2 release rev.1

problem is not able to mount usb drive .. it is detected but not mounted..?

help me to revert it back.pls

Note: Oops i don't have the MAC DVD right now !

-demigod-

---

MAC OS x : Yet to figure out version.
CPU:AMD E-350D APU MOBO:GA-E350N RAM: 4GB 1333Mhz GPU: AMD Radeon HD 6310
HDD:Seagate 160GB SATA DVD-RW: Transcend USB Burner USB Mouse & Keyboard
WebCam: Logitech C910

Chipset:
AMD Radeon HD 6310
North Bridge: AMD A45 FCH

One question that might sounds stupid, When the MAC is in sleep mode should "awake" with a simple mouse mouvement or a keypress?

For me, i need to press the flickering power button on the pc itself to wake it up
It doesn't respond to any key presses or mouse clicks/movements (Aluminum Apple keyboard & Mighty mouse)

---

Mac Inspiron 531 » 10.6.8 • 10.8.0 Legacy Kernel • AMD Athlon 64 X2 5000+ (2.60GHz)
Dell M2N61-AX/nForce 430/MCP61 • 4GB Dual Channel DDR2 667MHz
ALC888 • nVidia GeForce 8600 GT 256 MB
2 x WDC WD5000AAKS 500 GB SATA HDD

I thing on Kalyways DVD was a kernal which fully disabled sleep - great. Actually it's so when I press the off button the computer short the computer goes to sleep but I can't wake it up. This also happens when sleeping is fully disabled.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

for testing sleep i updated kernel using allkernel pkg.But now USB ports are not working.

help me revert back to Kernel 9.20 ( which came with Zep's AMD Leopard 10.5.2 Rev 1 )

i don't know the procedure or how to do it.
awaiting for your reply

Thanks

---

MAC OS x : Yet to figure out version.
CPU:AMD E-350D APU MOBO:GA-E350N RAM: 4GB 1333Mhz GPU: AMD Radeon HD 6310
HDD:Seagate 160GB SATA DVD-RW: Transcend USB Burner USB Mouse & Keyboard
WebCam: Logitech C910

Chipset:
AMD Radeon HD 6310
North Bridge: AMD A45 FCH

Same as p-J for the Dell, similar system, perfect sleep.

As for the other one (Athlon64 3700+, A8N-E, nForce4, Radeon X1600), no sleep. Well it does sleep, but it doesn't come back.

Wow, the OEM machines are doing fantabulous. =))

@ kourosh:

Have you an A8N-E or an Asus A8N-E FM/S (micro-ATX, Fujitsu OEM)? I have that one, also with an X1600. Great combination, nice small

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

How do I change the ACPI mode in Bios?

I have changed the system ACPI mode with terminal and put it to 3 and with a quick try that I made last night it went to sleep and then it woke up, but I didn't had keyboard or mouse. So I don't know if it was fully funtional.

Also I am using the plain TOH 9.2.0 kenrel that comes with Zephyroth 10.5.2 Rev.2 iso, I have tryied to change with the sleep kernel from Kaliway but I can't boot into my system, so I have returned to the old kernel.

You should be able to change the ACPI mode in your Bios about your "Power Management" or similiar. I know, that some Bios don't support that kind of options (for example the AHCI/SATA-Mode), but I think ACPI should work on every board and Bios.

-crawle