What to do before installing?

[prodigy_84]

Is there anything i need to do before installing iPC OSx86, do i need to install anything before so the boot 132 cd is recognised by pc's or do i need to install a partiotion using software that primes the partition so ipc can be installed?

[TeckEnthusiast]

Originally Posted by prodigy_84 Is there anything i need to do before installing iPC OSx86, do i need to install anything before so the boot 132 cd is recognised by pc's or do i need to install a partiotion using software that primes the partition so ipc can be installed?

You dont need to install anything. Just pop in the DVD into the DVD ROM drive and boot with -v(just in case you encounter any problems). When you get to the installer click on utilities>disk utility and that will open disk utility(built in disk partitioning software for OSX). When the application loads you will see all your hard drives on the left side of the application. Highlight the hard drive(or partition) in which you will install OSX and highlight the erase tab. Your "Volume Format" MUST be Mac OS Extended(Journaled). Below that you will need to name your OSX partition(ALL IN ONE WORD.NO SPACES). Click "Erase..." and wait for it to finish. Now you can exit Disk Utility by clicking Disk Utility>Quit Disk Utility at the top of the screen. That will bring the OSX installer. Go ahead and click "Continue", "Agree" to the license agreement. Select the hard drive or partition you created and hit "Continue." On the next step click on "Customize" and choose the drivers,patches, etc that match your hardware and click "Install." The installation takes about 20-30 minutes. If the installation fails it could be many reasons why it failed. You could have forgot to install something or you installed something you didnt need or maybe some of your hardware isnt supported.If the install is successful restart your computer and boot with -v(just incase you encounter a problem). If it freezes take picture of the last line that you see and post it here. HOPE THIS HELPS YOU
GOOD LUCK

[Lord_Jeremy]

One thing to keep in mind is that you may have to tweak your BIOS settings before even the installer will boot correctly. Post back here if you have any problems. Good luck!

[prodigy_84]

when i put in the installation disk and reboot my pc, it always starts loading windows, i've been told to press the f8 key repeatedly while sytem is booting but this also has no effect.
why doesn't my pc recognise the disk? i have a dell studio 640/6161.

[TeckEnthusiast]

Originally Posted by prodigy_84 when i put in the installation disk and reboot my pc, it always starts loading windows, i've been told to press the f8 key repeatedly while sytem is booting but this also has no effect. why doesn't my pc recognise the disk? i have a dell studio 640/6161.

Lord_Jeremy is right when he says that you must check that your first boot device is your DVD drive. You most likely have your BIOS set to boot from your hard drive and that is why your computer ignores the installation DVD and boots into windows.
HOPE THIS HELPS
GOOD LUCK

[prodigy_84]

ahh, that sounds right. how do i change my bio's on vista?