|
#1
|
||||
|
||||
Hi Hootcho,
I'm glad my guide could help, I wanted it to be more specific since I also hit a wall with other guides. My 8800GT is a 512MB version but I don't use a GFX EFI string anyway since I've included this is the DSDT file. Other then GFX you could probably use my DSDT. I don't know what will happen if you use it with GFX included, it might not boot or just boot in VESA mode. If you have another install (or Windows with macdrive) you could try it and if not working restore. Be sure to upgrade to F12 since it boots faster. When searching for AHCI devices it speeds up a lot. Hope that helps m8 Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ |
#2
|
|||
|
|||
Hi Snow, I have the same board as you have and ran into the CMOS issue. tried fixing this but to no avail. I'll try your dsdt.aml and see if this works out.
|
#3
|
||||
|
||||
Anyone got a 10.6.2 SleepEnabler.kext that blocks the AppleUpstreamUserClient.kext that causes the mouse lag?
Or another fix? Aside from just deleting the kext at fault from the system. |
#4
|
||||
|
||||
Is the lag still there because I've got iTunes running but haven't got a hitch (so far)
Anyway, try this one, I've added the code to the working 10.6.2 kext. Update: Seems to be there although even less obvious then pre 10.6.2 so trying the kext myself. Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ Last edited by Snow; 11-10-2009 at 12:55 PM. |