To be more specific I get this error several times before it asks me to enter my disk number:

dyld: unknown required load command 0x80000022
/Volumes/hackintoshInstall/snow-installer/installnow: line 191: 273 Trace/BPT trap ./filez/clear

I chose the following destination as my target ( thumb drive ):

2: Apple_HFS hackintoshInstall 7.2 Gi disk1s2

After choosing 'Yes' I get that same error again:

dyld: unknown required load command 0x80000022
/Volumes/hackintoshInstall/snow-installer/installnow: line 157: 368 Trace/BPT trap ./filez/clear
Is the following, your target partition?

I choose 'Yes' One more time and it starts to copy files. More errors Ensue:

dyld: unknown required load command 0x80000022
/Volumes/hackintoshInstall/snow-installer/installnow: line 144: 375 Trace/BPT trap ./filez/clear
file copying done...
waiting 3 secs...
Volume hackintoshInstall on disk1s2 failed to unmount
waiting 3 secs...

Installing Chameleon boot0 file...

Installing Chameleon boot1h file...

dd: /dev/disk1s2: Resource busy

flagging partition as bootable...

fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> Partition 2 marked active.
fdisk:*1> Writing current MBR to disk.
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n]
waiting 3 secs...

There are a few more of those same 'dyld' errors after this. I went ahead and tried to just boot off my usb stick anyway and I got the error:

boot0: GPT
boot0:testing
boot0:testing
boot0:error_

It just sits there, cursor blinking, until I reboot. Any ideas?