anybody tried SnowOSX Universal 10.6 Gold Master (10a432) v3.5 yet ..

well, i've tried and got KP

i'm using :

Asus P5KPL
Intel Pentium Dual CPU E2160 @ 1.80Hz
HDD :
- ST3160215AS (5RA473D5) 160 Gb (Vsta)
- ST3160215AS (6RA9PFA2) 160 Gb (7)
- ST320011A (3HT0X76N) 20 Gb (Snow)
- ST3500410AS (5VM0G4RV) 500 Gb (Leo)
DIMM1: Corsair Value Select VS1GB667D2
DIMM3: Corsair Value Select VS1GB667D2
NVIDIA GeForce 9400 GT 1024 MB
Realtek ALC662 @ Intel 82801GB ICH7 - High Definition Audio
DVDRW LG 20x (ATA)

after finished installation, reboot,
-x32 -v

here's what i've got:



anybody have same problem
or any suggestion to solve this, thx

just read your sreenshot.
replace appleintelpiixata with another one and check your bios settings like ahci and stuff

"replace appleintelpiixata with another one and check your bios settings like ahci and stuff"

Sure, but how do that with the DVD stuff if DVD boot gets KP.
I get no screen , even bootet with -x (safe mode). Only -v gets textoutput and gets running like only the gpu isnt right used (OS X runs but no screen results shown).

I looked into the .mkext. There is no silent natit (SL) nor Geforce.kext. I have an NVIDIA 9600 GT which is working normaly as Framebuffer (no QE/CI) even without any injectors.

For me useless without make changed to the dvd content (add drives, add injectors / efi string).
How do such an change and burn the changed things back on new DVD ?

@tham

i have replace appleintelpiixata.kext with the one from netkas but nothing change
tried to install on different partition (SATA) but same problem occurs

any suggestion

Sounds like your not doing the OSInstall.mpg method, as it doesnt require a reboot to complete the install.

finder->go->goto folder

/Volumes/Mac OS X Install DVD/System/Installation/Packages

if thats the name of your dvd installer disc

and double click OSInstall.mpkg and install using this util

DO NOT REBOOT after the install is done, you'll have to upload your kext's and bootloader etc.

Exact same problem here on my dell inspiron 6400 core2duo T5300 , installs goes just fine but on reboot instant kp ive tried all appleintelpiixata thats available and still kp even tried booting in 32 bit mode tried diff kernel still kp any ideas welcome thanks

---

Snow Leopard 10.6.1

Windows 7

Asus P5LD2-VM DH (R 1.0 ) - ECS Gforce 8600 GT (512 meg ) - Intel Pentium D 930 3.0 ghz - Network = Intel Pro/1000 - sky DG934G modem/router - HD = 1x200 sata 1x80 sataII - pioneer dvd+R/RW 110D ( sata ) - Audio - Hda 882

I use snow on my laptop no problem, But I cant repair my permissions...Strange.....


00010 D.M

You can use vanilla AppleATAFamily.kext and AppleIntelPIIX kexts, just set your ide channels to compatible rather than enhanced mode, I have the same panic when not in compatible mode. Downside is I can't see all my SATA drives, upside I can use OS X SL 10.6.2 which seemingly runs better then windows anyways.

Edit:
Also there is no need to do the mpkg method, the only mod I did to my install disk was that I switched it for the MBR compatible mpkg as I do not use a GUID partition map.

Thank you