InfiniteMac OSx86
Page 59 of 103 « First < 9495758 59 606169 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   10.X (http://infinitemac.com/forumdisplay.php?f=36)
-   -   Asus K50IN (http://infinitemac.com/showthread.php?t=4409)

bayuaditya 08-27-2010 06:58 AM
Quote:
Originally Posted by flip360 (Post 50317)
i just updated another K50 with 10.6.4 which contains the native Atheros WiFi card, i used the kext for WiFi from the_man_of_the_oak and voila, i never thought i would say this: Atheros Airport WORKS! :)

p.s. also our notebooks rule. good one asus :)

Cheers
nice to hear that buddy, so there is some question for u guys, here u go :
before update to 10.6.4, should i update to 10.6.3 first?? or just update to 10.6.4 directly? (downloading 10.6.4 combo update is in progress)
which kext should i use before reboot to 10.6.4?? (download links are appreciated)

sorry my bad english, thanks in advance.
:D

man_of_the_oak 08-27-2010 09:29 AM
This one (you need to use it before restarting after every big update like 10.6.x):

http://osx86.sojugarden.com/files/Ex...ement.kext.zip

When it boots successfully (and it will if you use only my kexts) you can delete it~

tachyon 08-27-2010 03:53 PM
I hate Me :( Somebody
 
I'm Korean. and My english is not good.
so I ask every reader's approval.

I succeeded installing 10.6.0 ver.10a432
I'm Universary freshman. and I need iPhoneSDK4.0
so I click software update
after reboot, The screen is blinking with displaying blue, pupple and white.

I try another way to install MacOSX
i get 10.6.3 retail and try to install.
The result is same


Somebody help me!
I must install iPhoneSDK. Virtual machine is too slow...

I use K50IN-SX298V.
It is.....
Intel P8800
G102m
4GB RAM(2+2)
AR9285 WLAN
RTL8168 LAN
No Bluetooth.

I never update BIOS,

man_of_the_oak 08-27-2010 05:04 PM
Update bios - this is the first you need to do.

Then - don't try with k50in boot cd since (from what I could see trying to install OSX on a few K50IN laptops) it usually doesn't work. Download iBoot from here: (remember to choose NVIDIA version) http://tonymacx86.blogspot.com/

It will boot your retail DVD, at least I hope so, if it doesn't - try to add some flags like: -v, -f etc.

When you install the system - download combo update to 10.6.2, then 10.6.4 - none of them using update tool of Snow Leopard (you can find it on google). Before you start installing it all, run Chameleon installer package and when all updates are installed (it's very important to run it before using them because sometimes it would not run later) use it to put bootloader on your system partition. http://www.tonymacx86.com/viewtopic....&t=208&start=0 (better use RC4)
When all your updates are installed and Chameleon is here, use files I attached to this post, it should work flawlessly. (but before first restart put also http://osx86.sojugarden.com/files/Ex...ement.kext.zip to s/l/e. After the first successful restart you can delete it.

PS Use Kext Utility to rebuild permissions before restarting.

Files: http://uploading.com/files/3a8m43c7/...%2BBackup.zip/

PS2: for working wifi kext - look a few posts up~

tachyon 08-27-2010 05:57 PM
Quote:
Originally Posted by man_of_the_oak (Post 50333)
Update bios - this is the first you need to do.

Then - don't try with k50in boot cd since (from what I could see trying to install OSX on a few K50IN laptops) it usually doesn't work. Download iBoot from here: (remember to choose NVIDIA version) http://tonymacx86.blogspot.com/

It will boot your retail DVD, at least I hope so, if it doesn't - try to add some flags like: -v, -f etc.

When you install the system - download combo update to 10.6.2, then 10.6.4 - none of them using update tool of Snow Leopard (you can find it on google). Before you start installing it all, run Chameleon installer package and when all updates are installed (it's very important to run it before using them because sometimes it would not run later) use it to put bootloader on your system partition. http://www.tonymacx86.com/viewtopic....&t=208&start=0 (better use RC4)
When all your updates are installed and Chameleon is here, use files I attached to this post, it should work flawlessly. (but before first restart put also http://osx86.sojugarden.com/files/Ex...ement.kext.zip to s/l/e. After the first successful restart you can delete it.

PS Use Kext Utility to rebuild permissions before restarting.

Files: http://uploading.com/files/3a8m43c7/...%2BBackup.zip/

PS2: for working wifi kext - look a few posts up~
Thank you.
I will try it. but....
Null CPU Power Management kext link, the last link, is broken...
Check it plz....

man_of_the_oak 08-27-2010 07:07 PM
It is not, simply use "copy link address" on the link and paste it in browser's address field.

tachyon 08-28-2010 06:24 AM
thank you oak
 
Your advice is nice

But I have a problem....:(
Maybe it is happened by my misunderstanding.


I try...

1. Boot iBoot and install 10a432. It is 10.6
2. After install, install Chameleon
3. Install 10.6.2 combo update from apple by DMG file.(I didn't click reboot.)
4. Copy /Extra and /S/L/E from your backup link file to HDD.
5. Copy NullCPU......file, too.
6. Click reboot at combo update pkg.

After every steps, I can see chameleon
And I try boot Mac HDD. But it froze...

So I add a flag : -v.
Then display just a sentence. It is...

Loaded HFS+ file : [System/Library/CoreService/SystemVersion.plist] 479 bytes from 42527c0.

Do I mistake? What should I do?

man_of_the_oak 08-28-2010 11:26 AM
Did you use kext utility before reboot? What is more - you should also install 10.6.4 combo update before restarting and putting my extra etc.

1. Boot iBoot and install 10a432. It is 10.6
2. After install, install Chameleon
3. Install 10.6.2 combo update from apple by DMG file.(I didn't click reboot.) - here you should also install 10.6.4 + don't reboot
4. Copy /Extra and /S/L/E from your backup link file to HDD.
5. Copy NullCPU......file, too.
6. Use Kext utility: http://www.kexts.com/view/129-kext_u...update%29.html
7. Click reboot at combo update pkg.

tachyon 08-28-2010 01:38 PM
Quote:
Originally Posted by man_of_the_oak (Post 50350)
Did you use kext utility before reboot? What is more - you should also install 10.6.4 combo update before restarting and putting my extra etc.

1. Boot iBoot and install 10a432. It is 10.6
2. After install, install Chameleon
3. Install 10.6.2 combo update from apple by DMG file.(I didn't click reboot.) - here you should also install 10.6.4 + don't reboot
4. Copy /Extra and /S/L/E from your backup link file to HDD.
5. Copy NullCPU......file, too.
6. Use Kext utility: http://www.kexts.com/view/129-kext_u...update%29.html
7. Click reboot at combo update pkg.
Um.... I have finished at step 5.
I downloaded Kext Utility, and run. but Kext Utility is frozen.
No window opened.
Just Kext Utility's icon was jumping for about 30 seconds, and stop jumping.

I'm not click reboot at combo update pkg, yet.

maybe I must be waiting with notebook cannot click power off and reboot. for 24hour. :)

man_of_the_oak 08-28-2010 03:59 PM
Forgot to mention that it's a good idea to run Kext Utility before but don't type the password before you finish with everything else...

Anyway - try to run it again.