boot
ok, sk1nhd33t i finally manage to install SL...with bits of this tuto and part of the OSInstall.mpkg method, and lots of try/error/try again. I was forced to use AppleIntelPIIXATA from leopard because somehow the new one for SL did not recognize my mac partition, during install on your method or any other method too :confused: . i used Chameleon-2.0-RC2-r640 and EFI 2.0.
Sound works good, internet too, no Kp (only when i was trying to install Photo CS4),sleep is working, the problem is when i come back from sleep sound is full of glitchs (like leopard too). my major annoyance is every time i boot to SL (installed on one hdd of 3 at my disposal) i have to boot with flags -v -f -x32 otherwise it will stall. i edited boot.plist like this but still will not boot. <key>Graphics Mode</key> <string>1440x900x32</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>-f -x32</string> <key>Kernel Flags</key> <string>boot-uuid=B5375017-4D34-3E88-9B6867110FDFEA89</string> <key>Theme</key> <string>Default</string> <key>Timeout</key> <string>1</string> <key>device-properties</key> is there any way to make it boot automatically without typing those fags everytime |
I downloaded the PleaseSleep application, which seems to work just fine!
But its really really ugly and there is no setting to hide it completely, remove the menu bar icon or the floating window, you must have atleast one, and i would like it to run completely in the background. I really dont need to change any preferences at any time. So how's this done? Using it on my netbook too, therefore i need the space in the menu bar, cause of the low resolution. |
My thought exactly ... have you try to choose the non-menu bar option (floating window) then go to preferences-> accounts and you'll have the option to see what app that auto-run when login automatically and make hidden? That way it'll be minimized to the dock.
Quote:
|
PleaseSleep cant be hidden even if you tick hide on startup so what i did was change it's menubar icon, at least now i dont see a tricolor "Zzz" icon and it matched other icons in my menubar :)
http://img16.imageshack.us/img16/750...90925at114.png pleasesleep is the icon before MainMenu (eraser icon) |
BlaStiWi and sk1nhd33t okey
The thing is i only have 1024x600 resolution, and it sucks to have many icons at the topmenu. Hope we'll find a solution! |
1 Attachment(s)
I have 10.5 running fine on an Abit IP35 Pro w/ ATI 4850 video card. Can't get the install of SL to work unfortunately. I'm booting from an external USB HD and it takes about an hour to get to the attached screen. It then either freezes or after several more hours it shows some audio related issue.
I booted with the -v -x32 options. Also had to put the NullCPUPowerManagement kext in the Extensions folder to get past an HPET-related kernel panic. Any suggestions are more than welcome. |
Quote:
|
1 Attachment(s)
My mainboard has 2 NICs, w/ one disabled booting setup took a very long time, both enabled and it would freeze after network initialization. Purchased and installed an RTL-8169 card and disabled the onboard cards, ut now I get a kernel panic. Any suggestions?
|
Chess problem
1 Attachment(s)
Chess kernel panic.
Chess kernel panics in 64 bit as soon as I move the mouse. Front Row and the ripple effects in dashboard work fine though. Chess is fine in 32 bit kernel. It makes me wonder if I have qe/ci only in 32 bits or if its not clear cut like that. This is the crash screen: Attachment 742 I have the G31M-ES2l and the graphic card Asus GeForce 7300GT 256mb. Output through DVI. Snow leopard with kexts as in sk1nhd33ts guide. Chameleon RC 2/3 boot0 boot1h and netkas 10.3 boot. No efi string - GraphicsEnabler in boot.plist. Kext Utility. I don't know much about Quartz extreme and Core Image except that they are supposed to make the GPU do more of the work. The 7300 is pretty weak though so I don't know what the difference would be. The Wikipedia entry for Core Image list the 7300 as one of the cards used by apple for core image and notes that "any GPU capable of handling Core Image instructions is also Quartz Extreme capable". I used a trial version of iMaginator and ran this test I found. There was no difference under 32 or 64 bit (around 2 min 40 sec). I also used Core Image Fun from the developer tools. Transitions and effects worked fine in both 32 and 64 bit. (it crashes when using large pics like the example pics). Quarts composer also seems to work. Xbench gives me slighter higher value for quartz and openGL in 64 bit… Clicking the "Open in 32bit mode" under 64 bit kernel doesn't help Chess. I also tried out an app called OpenGL Extensions Viewer. No difference in cpu % while testing. g31m2es2l E6300 2.8 Ghz Asus GeForce 7300 GT silent 256 mb 2 GB 800 MHz ram 500GB HD samsung ecogreen PicoPSU 120 w |
on mine, keeps on saying restart before install..anything to modify to remove the restart...
|
Kext Help
2 Attachment(s)
First thank you. This guide worked perfectly for me. Snow running perfectly even after update. This is my problem I accidentally drop a kext into a console and now all my kexts look like in the picture. Even if I download them they turn into a folder before I can do anything with them. Anyone have any ideas how to fix this?
|
Quote:
same thing happens with me. i get the ripple effect and screensavers work, but chess crashes like yours does. i have the same board and cpu as you. i have a 7600gs 256mb. i simply got rid of chess. haha. |
good to know, maybe its just a bug then.
I never used chess before, only to test for qe/ci :) |
Need Help!
1 Attachment(s)
I've followed the instructions and cannot get the USB to boot. I have tried many. many things. but, no luck. Need help.
I posted the verbose message screen. The screenshot attached is right before the machine reboots. I Leopard 10.5.6 installed (ideneb), and had no problems with that install. Here is what the screen reads: efi_inject_get_devprop_string NULL stringdata Loaded HFS+ file (Extra/smbios.plist) 943 bytes free from 4237430 Patched DMI Table Loaded HFS+ file (DSDT.aml) 15508 bytes from 4237430 Patched ACPI version 1 DSDT Then the machine re-boots. I am using Chameleon 2 RC2 with EFIv10 boot file. |
Quote:
|
I got mine working fine now incl. an ATI4850 thanks to the following thread:
http://www.insanelymac.com/forum/ind...owtopic=182123 One thing that isn't working, is 5.1 out over S/PDIF. Stereo only for now. |
Vanilla on Leopard
Quote:
This is what system profiler says: System Version: Mac OS X 10.5.5 (9F33) Kernel Version: Darwin 9.2.0 Boot Volume: HAckint0sh Boot Mode: Normal Computer Name: Hackint0sh So, if I can't run vanilla on 10.6, then can you recommend a guide for me to follow? I am just a little past noobie stage. raymop |
sk1nhd33t, thank you so much for all the time/work you've put into this and helping others get up and running. I'm brand new to this and have a couple of questions from the 1st post in this thread:
Quote:
Also, would you consider updating those attached files to the latest? I tried doing it myself but got confused. (e.g. Chameleon RC3, PC-EFI 10.3, etc.) I've tried a SL install several times on my G31M-ES2L with the VGA PNY VCG85512GXXB 8500GT 512MB graphics card. I've gotten it up and running almost perfectly, except no matter what I try, audio doesn't work (no audio devices show up). I've tried LegacyALC883.kext, I've tried LegacyAppleHDAHardwareConfigDriver and LegacyHDAPlatformDriver, I've tried both, I've tried Voodoo, but nothing works. |
Quote:
I migrated my Leopard account, so maybe that caused an issue. I think I may just have to totally wipe the drive and completely start from scratch. If someone would be so kind as to create a new zip with the currently recommended solution, I would greatly appreciate it as well. |
Ah, glad to know I'm not alone. But I didn't migrate Leopard. I did a total clean SL install, following a few different guides and trying many different kexts. I'm about to try this guide (the one at the top of this thread) again.
|
Quote:
Quote:
Quote:
Quote:
also be sure to check System Preference then go to Sound and choose Internal Speakers/Built-In Speaker for both Sound Effects and Output Tab. here's how the setup goes, any of the 3 combination will do: - LegacyAppleHDAHardwareConfigDriver + LegacyHDAPlatformDriver + HDEF = audio - LegacyALC883.kext + HDEF = audio - VoodooHDA (S/L/E) + untouch dsdt = audio if all fails then i dont know what to suggest anymore ^_^ Quote:
|
you can also check this automated installer created by Conti, this will install RC3 + PC EFI 10.3 including the kext needed except for our alc883 audio, for permission and creating Extensions.mkext check this too (again created by Conti), it's an automated and manual command to fix and create your mkext, just edit it before running since conti uses CustomExtension on his script or rename your extensions folder.
HTH :) |
Sound is working. I did a fresh install on another drive, copied over my settings manually, and then used carbon copy cloner to get it all back on my original disk.
|
Spotlight KP
Hi,
(i thought my installation went well, but now i have the following problem. Every time i boot my computer, Spotlight is trying to index my harddrive and my hackintosh gets a KP and i have to reboot...booting....Spotlight trying to index...KP...reboot...etc. :'( Someone has a fix for me?) O.K. it's not (only) a Spotlight problem. I stopped running spotlight and deleted the index. (hostconfig SPOTLIGHT=-NO- and mdutil -i off /, mdutil -E /) Now i get every few minutes a KP...Grrrr. Any suggestions? Another point is that i can't suspend, i have to shutdown the computer every time. Smartsleep didn't help. HW: G31M-ES2L, E5200, 4GB RAM SW: see install-instructions (except installing Chameleon RC1 manually), SnowLeopard 10.6.1 |
I'm a bit confused about the PleaseSleep appliation... I don't have PleaseSleep and my sleep seems to work fine, as in my computer turns itself off in, say 20 minutes. It turns on my fast after this, thus I assume it went to sleep. Am I missing something here?
P.S I have the same board as sk1nhd33t. |
Quote:
I couldn't get my usb to boot with the standard RC1/2/3 or EFI boot files either. So just restore your SL iso to the USB drive, install the dr. hurts bootloader and put the extensions(USB) folder and others in the extra folder. |
Help w/G31-ES2L SL install
I've followed your guide, installed from USB successfully, booted into fresh SL partition (-v x32), installed Chameleon RC2 package for EFI HFS, copied boot to root, copied Extras to root with com.apple.boot.plist with EFI String for 8600GT 256MB from OSX86 Tools, renamed extensions.
When I then try to boot into the drive with -v x32, it kernel panics. I don't understand, this has happened twice on me after another fresh install and then isntalling chameleon. any help/suggestions? http://plaza.ufl.edu/rmn87/KP.jpg G31M-ES2L rev2.0 4gb DDR2800 C2D E8400 eVGA 8600gt 256mb |
Quote:
care to share the rest of your specs? Quote:
|
i have successfully installed 10.5.6 on my G31M-ES2L, can someone tell me if the BIOS settings for 10.5.6 and 10.6 be the same? or someone please post the BIOS settings for 10.6 :)
|
Quote:
|
Kernal Panic While Installation
Im unable to install snow leopard. When I select the "Install Mac OS X" in Chameleon Bootloader I get the attached screen. I have tried to install in 32bit and 64bit. Both I get the same error. Please Help me out with this.
Im using G31M-ES2L V1.x mobo. iAtkos Leopard 10.5.7. http://i36.tinypic.com/2mepsnk.jpg |
Quote:
My specs: GA-G31M-ES2L Rev 1.1 Intel Pentium E5200 Asus 9600 GSO Video Card Optiarc DVD RW AD-7240S Asus WL-138G V2 PCI Wireless card 1 TB Hitachi HDT721010SLA360 HD Question: I cannot get my CPU temp to display with iStatMenus. It only shows the HD temp. Has anyone gotten CPU temp to display using any app? |
I have everything as in the first post and automatic sleep works for me without PleaseSleep as well. 32 and 64 bit both.
Only difference is I don't have a bonjour fix. Weird thing though, if you set Display and Computer to sleep after, say 2 minutes of inactivity, display will sleep at that time but it takes a couple of minutes after that before computer sleeps too. 1 sata drive, apple pro usb keyboard, 7300gt, firewire pci, picopsu. OK, tested a bit more and it seems to just work now and again :-) |
Don't upgrade your bios, I upgraded to F10 and now my ethernet does not work, even with the ethernetbuiltin put in the boot.plist
Edit: Help, Everything worked fine with the Beta F9 Bios, but now ethernet does not work even when I downgrade to F9 (final) bios. Im going to try the F8 bios, but does anyone know if theres any solution? |
Quote:
|
hey guys,
looking into buying the board, but i'm not really sure if 5.1 multichannel audio is working?! I read that S/pdif is not working, but what about analog multichannel? thx, lazy ps: awesome guide, thx so much!! |
Audio for ES2L v2.x board
Quote:
I also have the version 2.x of the board and I was having the exact same problem: everything working (with a separate NIC, not using the onboard LAN) except SL can't see onboard audio. the problem I was having was I was using Chameleon 2RC2...i switched to RC3 and used the kexts and DSDT.aml posted by sk1nhd33t and voila! WE GOTZ AUDIO LOLZ! to recap: - use the kexts provided by sk1nhd33t - use the DSDT.aml (patched with HDEF already) by sk1nhd33t - use Chameleon 2.0 RC3 all three are crucial to have on board audio working for ES2L v2.x boards Hope this helps!! infinitemac community rules! sk1nhd33t's guide is awesome! i would have never managed to build my Hackint0sh without his guide! Ayos ka talaga, tsong! (translation: You're alright, brother!) :-) |
I need some help, I installed snow leopard using a lifehacker guide, but cant install any kexts using Osx86 Tools.
I don't get any sound, i dont see any output device in sound preferences. Using 10.5.8 i was able to install sound kext but why isnt working in snow leopard. what tool do i use to install kexts? |
Installation on G31M-ES2L with geforce 7300 GS - success
Hi,
Using a bought copy of the upgrade disk I managed to use your tutorial to upgrade a working ideneb install to snow leopard! Thank you SO MUCH, you are the greatest!! Some things: 1. adding EFI means adding a long list of digits to the com.apple.Boot.plist and it is based on your graphics card. I used "EFIStudio" , entered my EFI in the file (which you later copy from the USB to the HD in /Extra/com.apple.Boot.plist) 2. the UUID of my computer (you can find it in "apple->about this mac->more info->hardware under "hardware UUID") was already in the plist when I opened it, which brings us to: 3. I did not do exactly as written here. this tutorial is for a new install and I upgraded a current install, somehow it worked (maybe because I was based on ideneb to begin with?), after installing from USB I booted from the USB again but chose the HD I upgraded. the OS started ok (no video :-( ) but could not install chameleon for some reason. I didn't get it installing until now.. but I can boot from the HD now (after copying all of the Extra/ and boot files and changing as written in first post) and now the OS works.. so I don't know what was that chameleon failed to install all about. Anyway, thank you so much for the howto, I really admire all you people taking the time to make this possible!! |
my sound output/input are showing no devices - any help? Thanks
|
I have the same problem, no audio devices are showing up, can anyone help?
thanks Quote:
|
drossxyu Has the sound fix
Quote:
The fix by drossxyu is what worked for me. I tried everything. And I mean everything. This is the ONLY sound fix that worked, You must remove any and all other HDA's from /extra and s/l/e. Rebuild and reset permissions. Anyone that has sound problems should try this fix. I have a g31m-es2l v1.1 F8 with a pentium D 950. After 1 week, I finally have snow leopard with working sound. |
Try this fix for no sound
Quote:
|
Thanks - I will try this audio trick on a fresh install again tonight.
Or can I do it on my existing install, I think i added several kexts to get it work, where is the path to remove them? What are these paths? "get rid of all other sound kexts that u have added, from both /E/E and /S/L/E" 1. I found the the link to the voodoohda file and pane. http://forum.voodooprojects.org/inde...pic,234.0.html Thanks! |
I got an question.
I have successfully installed Snow Leopard using your way, but I changed my GeForce 9600GT for an ATI HD 4870 512MB GDDR5 simply because its better, and I know it works on 10.6.1. However, when I did that, I got the following error: "AppleRTL8169 phywaitforautonegotiation timeout" I have googled, and I have no idea how to fix it. I did also try to use the USB-Installer and boot to install another one, because I thought it was because of the GFX change, but that doesnt work either.. I have also tried to do "n" instead of "y" on the useethernet string, but nothing. I have tried to remove the GFX String, nothing. I have tried to remove all the NVIDIA kexts (NVxxxx.kext), still nothing. Same result. Any chance for a hint in the right direction, or an direct answer? :p - Dag Magnus Edit: I removed the NVIDIA kext from the installer, the ATI kext, and added an modified ATI Kext and my installer now works. But when I install and try to run the newly installed Snow Leopard, it stops at the same problem. I dont know what I am supposed to do now, I am completely lost! |
I couldnt read all the post so please forgive me if its already answered
Were you guys able to get the onboard graphics working? Full resolution and QE support? If so please give me some sort of a guide or tip.... Thanks in advance |
Dsdt...
Ok, I am for the most part new to dsdt patching.. Here's my problem.
I used the dsdt.aml from the snow.zip. Install goes great, boots up great. Only, I have no networking at all! I have an asus 138g-wl wireless pci card (I think that's it, works well in 10.5). My board is the ES2L version 2, so I know that builtin Ethernet does not work. Anyway, if I remove the dsdt.aml from the zip in this guide and replace it with the one I was using for 10.5 (just the rtc fix), network starts right up.. But I lose the fixes in the new dsdt! Like, the CMOS reset fix, sound, etc.. Any suggestions? I looked at the decompiled versions of the old versus the new, I have no idea what I am looking at though. Thanks. |
Quote:
Quote:
|
Hi - this is a noob question
How do install the dsdt.aml file? I ask this because I installed Snow Leopard using the lifehacker guide for another gigabyte board, it works fine, except some things like audio. Now, I know there is a dsdt file in this guide, how can I apply it to my install? Thanks! |
Can anybody run Voodoopower.kext in 64-bit? It only works in 32-bit which I think is normal. But I want to run in full 64-bit and at the same time save power.
Is there any other way to run Speedstep buy not using Voodoopower? Or maybe anybody has a 64-bit version or a work around to make Voodoopower work. Thank you. UPDATE: I found the answer to my question but I'm not 100% sure it works. It looks like it works though. I just went ahead and read this thread: http://www.insanelymac.com/forum/ind...owtopic=181631 Scroll down at the 1st post you will see the link for CPUi. I DID NOT follow any DSDT/SSDT modification with regards to CPU speedstep. I just installed the CPUi app and that is it. I just made sure that Voodoopower.kext is not available in /E/E or /S/L/E. The reason why I'm not sure it's 100% is because of the program that netkas made, cpu-x, doesn't recognize the speed change. But the CPUi app itself does. I don't know where cpu-x fetches the info, but with Voodoopower.kext + cpu-x, cpu speed changes are recognized, but 32-bit only. The CPUi works in both 32 and 64bit. - SLEEP works, but it is harder to wake up - more keys needs to be pressed. AUTOSLEEP does not work. UPDATE: It was not hard to wake up from sleep. I just thought it was. Sorry. |