Thanks to ApexDE from his post here, error like this below after waking from sleep is now fixed!

http://voyn1x.infinitemac.com/usb-unmounted.png

just add this to your dsdt and look for Device (USBE) ..

@sk1nhd33t:
I have your motherboard (in a blue G3) and have been following this thread closely.
Great work!
I applied the above USB dsdt patch with success.
I did find however that I needed an extra curly bracket at the end of your code snippet for it to compile properly.

Problemas / problems with GA G31M-ES2L
 

Hi guys!

i'm see the tuto, and i'm very impress, by the way... thats confirmed! 10A4321 IT's the gold master!

But, here, in my home, i want to install in my second hard disk and i'm still get this constants errors! Please, see the youtube link of the kernel crashes.

http://www.youtube.com/watch?v=TONj3JFc9aE
http://www.youtube.com/watch?v=IlcvVulAtac
http://www.youtube.com/watch?v=ELASzECFWwo
http://www.youtube.com/watch?v=SvjAEO-DzCo

This errors are a kick in the balls!

I do not have memory key, so i'm install by the DMG using this tuto: http://www.ihackintosh.com/2009/08/h...pc-hackintosh/ (at least the frists steps)

my video board are a Xfx GeForce 7300 GS
this is the only offboard hardware of my machine, everything it's onboard, i have a dvd-RW drive SATA from LG, a Samsung SATA hard disk (10.5.8) and a Maxtor IDE Hard disk (Want put 10.6)

someone can help-me? maybe by msn messenger or gtalk?

my msn messenger is [email protected]
my gtalk accout are [email protected]

please please pleeease can someone help me? :'(

well, i finally got this installed, but i can not get sound working. to get this to install i used chameleon rc1, installing it on an efi hfs partition. so my extra folders is located on a seperate partition which i can setuop to view via /Volumes/EFI/Extras. I have tried all the kexts here for auio, 32bit, 64 bit, patched my dsdt, tried other kects from here all with no luck. the speaker icon does appear in my menu bar and i can see that the system reports the correct sound card data in my system profile, but i can not get any sound. sounds works fine in 10.5.8, but nothing in 10.6...

[GUIDE] Retail Snow Leopard DVD install for G31M-ES2L
 

i also have that same setup now via hidden EFI, try clearing your cache and create a new extensions.mkext and see if that works..

BTW guide is updated with all new kext and improvements :-d

Hi. I love the guide. Very well made.
So far, I have done everything according to the guide, and I am sad to say that I get an Kernel Panic when booting from the USB-Stick.

The KP says among other things:

"panic cpu 0 caller 0xffffff80002cbf74"
"Error Code: 0x0000000000000002"

Any idea what might be causing it?

And yes. I have the G31M-ES2L, and I used only your files, and did it the correct way (unless I missed something that is. But I doubt it.)

sincerely,
Dag Magnus

Any chance we'll get ahold of a Bonjour fix that'll work in 64-bit?

Very nice tutorial, man.

PCI NIC Not Detected
 

Thanks for all of your hard work! I have everything up and running, sleep and sound have no problems at all. Unfortunately I was unlucky enough to get a G31M-E2SL 2.0 board from NewEgg for this project, so I also had to install an Encore ENGLA-1320 card (RealTek 8169). It worked out of the box under 10.5.6, with the vanilla IONetworkingFamily kext. In 10.6 it's not detecting any PCI card as installed. It shows up in the POST and it has a light, so I know it's working, I just can't get show up. Any ideas?

Thanks a lot, just paying back the community who made a guide before me. ;)

for 64bit bonjour, as of this message the only way to make it work is via promisc which what im currently using now.

"when install DVD restore is done go to snow folder on your Desktop and copy the following to root of your flash drive

● dsdt.aml
● boot.plist - edit this to match your EFI Strings, timeout and Graphics mode
● Extensions[USB] (rename it to Extensions)
● Themes

when done you can now turn off your Leopard machine."

Do you really mean that we should copy the files from the /Snow/Extra/ folder on the Desktop, to the ROOT of the USB-Stick?

Edit: Also.. I couldnt install Chameleon v2 RC1 on the Snow Leopard disc after the installation.
It stops on "writing package reciept". (allmost at the start of the installer).
Any workaround on this?
I found a way to do it manually. But I really dont know if I did it correctly.

Or is it a typo, and we should really copy it from /Snow/Extra/ to /USBSTICK/Extra/ ?

Because when I copy it to the ROOT of the USB-Stick as you have written here, I cant get to the installation-screen. I only get an gray screen with the mouse-cursor spinning.

When I put it in /USB-STICK/Extra/ I can access the Installation-screen successfully.