wifi RTL8187B toshiba L300-12K leopard 10.5.8, help
Hello I have a satellite toshiba L300-12K on ipc osx86 10.5.8 leopard I would like to install the wifi and it do not work I already have to try thing and no answer my card wifi is a RTL8187B on toshiba satellite L300-12K help me please :'(
|
Here ya go...
1 Attachment(s)
Install this patched kext (Patched by me...) kext any utillity attached here and in the next post too dont forget to download both now... and and your good to go!
PM for more info.:) Tested Using it right now... |
Here's the second file, The patched .kext for the rtl8187b WIFI download this too.:)
|
1 Attachment(s)
Sorry the file had problems uploading....here it is
|
Rtl8187b
When I put out(switch off) the computer there is a message with a yellow exclamation mark. That I have to relight the computer there is nothing which has to change the wifi does not still walk(work) ( RTL8187B)
|
I dont understand your question?
|
What does the meassage mean? In the box tell me more?
|
When I put out the computer he wrote his there before the computer goes out: updating boot caches
Caches necessary for booting are being updated. System shutdown will proceed once the caches are up to date |
?? :'( help me please
|
Thats normal, Restart then open the Realtak WLAN utility and your good to go.
|
Has well. Ba when I launch the RTL Wlan software to adapt of my RTL8187B the application remain to block nothing displays
|
jnn,n,n,,kk,j,kklk! k
|
please help me
|
Open up the system profiler and go to USB and click on Usb composite device and copy everything it says and post it here ok?
|
Emplacement du contrôleur de l’hôte : USB intégré
Gestionnaire du contrôleur de l’hôte : AppleUSBUHCI Identifiant du périphérique PCI : 0x2830 Identifiant de révision du PCI : 0x0003 Identifiant du fournisseur du PCI : 0x8086 Numéro de bus : 0x1d USB Receiver : Identifiant du produit : 0xc51b Identifiant du fournisseur : 0x046d (Logitech Inc.) Version : 46.00 Vitesse : Jusqu’à 1,5 Mb/s Fabricant : Logitech Identifiant de l’emplacement : 0x1d200000 Courant disponible (mA) : 500 Courant requis (mA) : 98 |
help me pls
Any one can help me pls.
I have same problem. My wifi RTL8187b don't work on Mac OS 10.6.3 |
Thank 00010 so much.
Today i haver reinstall then my wifi work fine for me :D however i have small issue, it's my RTL utility missing after reboot, can you help me ? |
Thank you very muuuch!!!! it works like a charm! the only thing is that the card is not recognized as a air port but like an ethernet adapter but i dont care it works!!!
|