InfiniteMac OSx86
Page 9 of 29 « First < 78 9 101119 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   DELL D620/630/830 kext pack (http://infinitemac.com/showthread.php?t=3840)

slic 10-12-2009 04:35 PM
Quote:
Originally Posted by teufel2k (Post 37251)
Thanx for the installer!



Just 2 more Questions:
I have a D630!

1) Will my internal monitor work with my standart resolution 1400x900?
2) Is it possible to select a target device for the installer? I'd like to install from my Leopard installation on an other Partition. But I cant boot until I installed your patches!

Thanx for your help,
teufel2k
1) Try it, but i think not X3100 supports only 1280 X 800 max.
2) Install only to partition where is installed Chameleon bootloader or install new chameleon (integrated in pack). Another way is install files manualy from sources (download link in first post)

Neurowork 10-12-2009 06:36 PM
Quote:
Originally Posted by slic (Post 37273)
1) Try it, but i think not X3100 supports only 1280 X 800 max.
2) Install only to partition where is installed Chameleon bootloader or install new chameleon (integrated in pack). Another way is install files manualy from sources (download link in first post)
Nah, I run my D630 with the internal display at 1280 x 800 and I have an external display plugged-in that runs at 1680 x 1050.

Thanks for you excellent work mate!

What about that Original speedstep stuff, how do I activate it?
I guess only unloading the nullpowermanagement stuff should do the trick right?
Do you run without it?

Thanks!

slic 10-12-2009 07:37 PM
Quote:
Originally Posted by Neurowork (Post 37278)
Nah, I run my D630 with the internal display at 1280 x 800 and I have an external display plugged-in that runs at 1680 x 1050.

Thanks for you excellent work mate!

What about that Original speedstep stuff, how do I activate it?
I guess only unloading the nullpowermanagement stuff should do the trick right?
Do you run without it?

Thanks!
hi, yes.. remove nullcpupowermanagment from extensions and boot :).
But on my d630 is snow with vanilla speedstep very slooow

blacklabelsktr2 10-13-2009 12:00 AM
Slic,
Thanks again man, you really made all the harder work easy.

*I fixed my ethernet issue by just deleting the ethernet kext completely and using wifi.
*I fixed my natit.kext issue by re-installing it with the kext helper.
Both issues for some reason said the kexts were not installed properly and could not be used.
*Docking Station - Limited Support - Headphone jack doesn't mute audio from laptop.
*Docking Station - Touchpad quits working after "undock"
*the 10.6.1 update worked great.
*I plan to test out the speedstep
*also plan testing outputting to 1080p 32" via docking station.
*I need to Repair my Hard Drive.. It says it does not pass Verification.
Next Project: Next I will be working on dual boot with windows 7 and chameleon 2rc3.
---------->
Laptop: Dell D630 w/Docking Station
Ram: 4GB
GPU: Quadro 135m
Wifi: RTL8187SE
Audio: Sigmatel 9205
Not Working: Built in Ethernet and primary wifi card.

teufel2k 10-13-2009 12:21 PM
I'm very confused.
The systemprofiler tells me that i have a x3100 and under windows my native resolution is 1440x900! (sorry missed the 40px) The next resolution is 1280x768 in windows!

Isnt that the same in all D630 ?

slic 10-13-2009 02:49 PM
Quote:
Originally Posted by teufel2k (Post 37338)
I'm very confused.
The systemprofiler tells me that i have a x3100 and under windows my native resolution is 1440x900! (sorry missed the 40px) The next resolution is 1280x768 in windows!

Isnt that the same in all D630 ?
hi yes, i have to on my external monitor only 1280x800 (768)
X3100 officialy don't support more

teufel2k 10-13-2009 03:25 PM
Hm, what is so special with my X3100?

My internal Monitor doesn't work and on my external monitor there is no Problem with 1600x900! And I have got a D630 too!

Hmm? perhaps someone knows the difference?

Quote:
Intel GMA X3100:

Chipset Model: GMA X3100
Type: Display
Bus: Built-In
VRAM (Total): 144 MB
Vendor: Intel (0x8086)
Device ID: 0x2a02
Revision ID: 0x000c
Displays:
Display:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
X203H:
Resolution: 1600 x 900 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
teufel2k

rdachs2 10-14-2009 02:35 PM
Hello i got several Problems..

I installed 10.6 in the D630 Harddisk using "OSInstall.mpkg" on my Macbook. Just the system, no fonts, no translations..
Then i installed chameleon bootloader 2RC3.pkg.
After this i expanded your "DELL D620/630/830 INTEL X3100.mpkg", so i was getting intel.pkg which i also expanded. I copied everything in there, in the locations on D630 Harddisk.

Then i did the followed in Terminal:
(D630 HDD = "sl")


cd /Volumes/sl/System/Library/Extensions
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Library/LaunchDaemons
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Library/Preferences/
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Extra
chown –R root:wheel *
chmod –R 755 *

Now i was booting the HDD in my D630 and the "after-install-screen" appeared. But only internal keyboard was working. I created my user and now i´m stuck in desktop.

wifi works
sound works
x3100 works

but

usb fail (wake up in BIOS is enabled)
touchpad fail

Also appears multiple boxes with Messages, that "System extension cannot be used" "was installed improperly"

What can i do??

visio 10-14-2009 04:10 PM
Chameleon also uses the /Extra/Extensions for certain extensions. Just to be sure, run this from terminal:

Code:
chmod -R 755 /Extra/Extensions/
chmod -R 755 /System/Library/Extensions/
chown -R root:wheel /Extra/Extensions/
chown -R root:wheel /System/Library/Extensions
diskutil repairpermissions /

xover 10-14-2009 07:56 PM
X3100 is just showing colors and lines
 
Hi all

After failing with other instruction sets for the D630 and failing to get QE/CI, I installed all this stuff on a fresh copy of 10.6.0 for my D630, and the system appears to be booting just fine. However, the display simply shows a bunch of colors and lines.

Previously, I had gotten the X3100 to work with Leopard 10.5.2, including QE/CI, so I know it's possible. I still have an image of that disk around so I tried the EFI strings from its com.apple.Boot.plist. That didn't work.

I also tried booting into Debian Linux, whence I dumped the DSDT, decompiled, edited the RTC section, and recompiled it using iasl. Then I put the new DSDT into /Extra. Still no joy.

Can anyone share any other ideas for me? Is there some kext I should try changing or modifying? Some way of generating new EFI strings? A chicken to sacrifice? Help!