InfiniteMac OSx86 - [GUIDE] Retail Snow Leopard DVD install for G31M-ES2L

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)

- - [GUIDE] Retail Snow Leopard DVD install for G31M-ES2L (http://infinitemac.com/showthread.php?t=3672)

anyone try out 10.6.6?

Quote:

Originally Posted by cyrusthevirus (Post 52130)

anyone try out 10.6.6?

Yep, works like a charm, no changes needed for anything, everything worked perfectly for me.
Only my post before is still a problem, I'll try some kext's now.

I couldn't get 10.6.5 to work in 64bit so I did a fresh install of 10.6.0 and updated to 10.6.6 64bit without any problems. I haven't tried putting sleepenabler back in yet, but everything else seems to be working great.

edit:
used 10.6.5 sleepenabler from http://code.google.com/p/xnu-sleep-e...es/detail?id=4

added kernel flag pmVersion=21 to com.apple.Boot.plist

everything works

Keyno, I have two 1.5 TB Samsung Spinpoint Green disks. The only problem I had is recognising a 1.5TB partition in the EFI loaded. I simply split the disk down. The second 1.5TB disk is used for Time Machine, no issues with speed, no issues with install. Just connected a SATA cable and plugged it into a SATA slot. I didn't do any special installs or mods at all, my base OS X is very, very, very standard.

Quote:

Originally Posted by Keyno (Post 52119)

Hmm, does someone of you have a second sata hdd?
Well, I have one and it is very very slow, someone knows why?
After a bit googling I found this thread: http://www.projectosx.com/forum/index.php?showtopic=564
But I just don't get it to work for me...

my config:
G31M-ES2L rev. 1.0
E7500 @ 2,93GHz
2x 2GB Kingston ValueRAM 800MHz
SSD OCZ Agility 2 40GB - Snow Leopard 10.6.6 on it
HDD Samsung Spinpoint F2 500 GB - all data (music, photos...) and Snow 10.6.5 as backup on it

At anyway my iTunes needs about 5 seconds to load a song, which is just amazingly slow...
XBench just shows exactly that. about 0.5MB/s in read???
http://img145.imageshack.us/img145/7...4355907336.png

So I tried patching my DSDT, I already built it several times with different compilers, but always the same...
Could someone please take a look on that or tell me his experience for a second sata drive? Attached there is my DSDT.dsl.

Otherwise, thank you very much for your guide, I just got everything working instead of sleep (no enabler works for me in 64bit, but in 32bit the AppleHDA won't work anymore...) and my slow sata drive :(

Thanks in advance and sorry if my english is not the best ;)

Could someone please post their Extras folder for 10.6.6 please? Im sure it would help a lot of the others too since there are very few threads on others sites for this motherboard too.
Thanks

Edit: Updated and everything works except for sleep

Quote:

Originally Posted by disco monkey (Post 52132)

Did you manage to get sleep working with that sleepenabler? I cant seem to get it working, I dont get KP's, everything works except for sleep.

Quote:

Originally Posted by cyrusthevirus (Post 52152)

Did you manage to get sleep working with that sleepenabler? I cant seem to get it working, I dont get KP's, everything works except for sleep.

yes, sleep works just fine. I can put it to sleep and it also goes to sleep on it's own with the timer. It wakes up with everything working.
In the sys preferences I have everything checked under Energy Saver.

I have a ver.1 board. The only kexts in E/E are fakesmc, legacyalc883, nullcpupowermanagement & sleepenabler.

g31m-es2l sleep 10.6.6

I could not get my g31m to wake up from sleep. It just reboots when I wake it up. Everything else works fine with 10.6.6. I'm in 32-bit mode.

Here is a list of kexts that I have loaded:

$ kextstat|grep -v "com.apple"
Index Refs Address Size Wired Name (Version) <Linked Against>
16 0 0x4ef3d000 0x2000 0x1000 org.tgwbd.driver.NullCPUPowerManagement (1.0.0d2) <7 4 3>
17 0 0x54f45000 0x2000 0x1000 sk.triaxis.kext.SleepEnabler (10.5.0) <7 4 3>
32 0 0x55385000 0x4000 0x3000 org.netkas.fakesmc (2) <13 7 4 3>
64 0 0x5b8be000 0x21000 0x20000 com.lnx2mac.driver.RealtekRTL81xx (0.0.67) <63 14 5 4 3 1>
85 0 0x5b96b000 0x22000 0x21000 org.voodoo.driver.VoodooHDA (0.2.1) <78 14 7 5 4 3 1>
97 0 0x5b549000 0x3000 0x2000 com.evosx86.driver.lspcidrv (1.0) <4 3>

How does it compare to yours?
Thanks

@disco monkey, could you please post your Extras folder since I cant get sleep to work either, it doesnt wake up from sleep. Also, are you in 64 bit?

Updated 10.6.6 sleepenabler located here: http://code.google.com/p/xnu-sleep-enabler/