iatkos install fine but no booting back

[erick2red]

i posted my situation on http://www.infinitemac.com/showthread.php?t=1751 .
Now i tried again changing installation options and this was what i selected and what i got:

i select on customize this options
PCI EFI v9
AppleDecrypt
SMBIOS Enablers (all of them)
Kernel: voodoo 9.5
ACPI: x86 ACPI
Disabler kext
Remove PowerManagent
OHR
Remove Thermal
from drivers:
VGA:
Graphics Update
GMA 950b
X3100
EFI string for ...
System:
Intel SATA
Intel AHCI
SpeedStep b
ext2
ntfs3g
NetWork: 8139 driver

i installed fine and when reboot:
got this:
mDNSResponder started
Alkor: Starting
Chosen model GMA 950
Alkor: Setting built-in=<data not shown>
Alkor: Setting AAPL,HasPanel=<data not shown>
Alkor: Setting AAPL,NumFramebuffers=<data not shown>
Alkor: Setting AAPL,NumDisplays=<data not shown>
Alkor: Setting AAPL01,Depth=<data not shown>
Alkor: Setting AAPL01,Pipe=<data not shown>

after this it hangs

any help, thanks in advance

[nfoav8or]

boot up with -s and remove the video kexts that you installed from the DVD. reinstall them once you have a system that is running. The default graphics will work until then.

OR...

Erase and reinstall the OS only this time do everything BUT selecting the video options. Too many people expect a fully working system right after install. Hackintosh is about fiddling with your machine to get it to work instead of expecting it to.

worry about the video, audio, ethernet, etc. later. it can be fixed later. First get a working system from an initial install.

[erick2red]

i'll try that now, my point to think that it should work is that i have kaliway 10.5.1 working now and when i run:

kextstat | grep GMA

i got

80 0 0x20dbd000 0x36000 0x35000 com.apple.driver.AppleIntelGMA950 (5.1.8) <78 72 17 12 6 5 4 2>

so that means to me that GMA driver works so, i thought that should work....

[nfoav8or]

Well then it is probably hanging on the next step before the printout comes.

Why were you never able to update from your Kalyway 10.5.1 DVD?

I know the jump from 10.5.1 to 10.5.2 was impeded by most hackintoshers because of EFI but what was your specific problem getting updated? Were you able to update at all above 10.5.1? Zeph's ASU allows for an Intel update... have you tried that?

[erick2red]

no, i haven't tried that, i even check now, i tried to update when i got kaliway 10.5.1 so a few months ago, and cause i've following the howto i found on the net and update still not working i dropped away, and wait until i can get an iatkos or leo4all hackintosh distro. ahh what was happens, i update to the not restart point, then change the line on the init/1 script to dsmos.kext and when reboot nothing the systems hangs itself...

so, now, i boot into 10.5.5
i erased these files from /System/Library/Extensions/

AppleIntelGMA950GA.plugin AppleIntelGMA950GLDriver.bundle AppleIntelGMA950VADriver.bundle AppleIntelGMAX3100.kext AppleIntelGMAX3100FB.kext AppleIntelGMAX3100GA.plugin AppleIntelGMAX3100GLDriver.bundle AppleIntelGMAX3100VADriver.bundle AppleIntelIntegratedFramebuffer.kext AppleIntelGMA950.kext

and rename /System/Library/Extensions.mkext to /System/Library/Extensions.mkext.older so the system can't find it

the other issue i booted into here after try on the boot prompt with:

-f -v -x cpus=1 platform=x86pc

i didn't reboot yet but i don't wnat to have to do that every time i boot, and i haven't graphics kexts, how do i install it?, i can't find it on the DVD, and i haven't audio either.
ahh so many thanks. really i wouldn't do this alone

there's so many questions here, sorry but more help?

[erick2red]

Originally Posted by erick2red no, i haven't tried that, i even check now, i tried to update when i got kaliway 10.5.1 so a few months ago, and cause i've following the howto i found on the net and update still not working i dropped away, and wait until i can get an iatkos or leo4all hackintosh distro. ahh what was happens, i update to the not restart point, then change the line on the init/1 script to dsmos.kext and when reboot nothing the systems hangs itself... so, now, i boot into 10.5.5 i erased these files from /System/Library/Extensions/ and rename /System/Library/Extensions.mkext to /System/Library/Extensions.mkext.older so the system can't find it the other issue i booted into here after try on the boot prompt with: i didn't reboot yet but i don't wnat to have to do that every time i boot, and i haven't graphics kexts, how do i install it?, i can't find it on the DVD, and i haven't audio either. ahh so many thanks. really i wouldn't do this alone there's so many questions here, sorry but more help?

i saved those kexts from the DVD install before remove its and now when reinstall it with UInstaller (pcwiz utility) the system give the same issue and didn't load anything, now i will try installing the olds one to see what i get?

the other issue the same i still boot into with:

-f -x -v cpus=1 platform=x86pc

and got safe boot at the login window

[erick2red]

i load my olds kexts from the kaliway and finally get 1028x1024, but still no audio, i'll gonna make search an still booting into "Safe boot" with

-f -x -v cpus=1 platform=x86pc

how can i skip this

[erick2red]

i still don't know how to load the kext, and make a normal boot?
there is this other issue, i use the old kext from kaliway and get 1280x1024 but i can't get "Quartz Extreme" and in Kaliway i do have...
i would like your help about 10.5.5

now i'm updating with Zeph's ASU the old kaliway, maybe crash, i hope not

[nfoav8or]

If I were in your shoes I would stick with the Kalyway 10.5.1 install DVD and update your system with the new Voodoo kernel manually. Then ensure you have AppleDecrypt.kext, Disabler.kext, and AppleSMBIOSEFI.kext files I've PM'd you as well as Chameleon. Then just update your system using single-system updates available from Apple's download site until you get to 10.5.5 where you need to install the DSDT patch (I'd use the patch app made by PCWiz over at his site) if I were you. Then you will be ready to update to 10.5.6 and fix your audio and video.

[erick2red]

Originally Posted by nfoav8or If I were in your shoes I would stick with the Kalyway 10.5.1 install DVD and update your system with the new Voodoo kernel manually. Then ensure you have AppleDecrypt.kext, Disabler.kext, and AppleSMBIOSEFI.kext files I've PM'd you as well as Chameleon. Then just update your system using single-system updates available from Apple's download site until you get to 10.5.5 where you need to install the DSDT patch (I'd use the patch app made by PCWiz over at his site) if I were you. Then you will be ready to update to 10.5.6 and fix your audio and video.

i just read your post, i got your files, updated the kernel, now i and load the kexts, now i'll reboot, wish me luck...

how do i update from apple updates, the old way?
remove PowerManagement kext and run the ComboUpd until restart option then rewrite intial/1 scripts?, this way?
thanks for all the help?