 |
|
#81
11-26-2009, 02:14 PM
|
|||
|
|||
|
i am glad that it turned out ok with the display kokozedman, about voodoohda, the last version is from cVad the guy that is making the kext utility for snow leo, maybe we ask him somethiong about patching nodes. Also Imkantus is working on patching the AppleHDA with ALC662, so stay tuned
 MSI P5Q / C2D E8400 @ 3.0 Ghz / 8GB DDR2 800Mhz / PCIe ECS 9600GT 1Gb / ALC1200 / Windows 7 / OS X 10.8 ASUS K50IN (SX004L) / C2D T6400 @ 2.0 Ghz / 4GB DDR2 800Mhz / nVidia G102M 512Mb / 15.6" HD/LED / ALC662 / Dell 1490 802.11g / Windows 7 / OS X 10.8 
|
|
#84
11-26-2009, 03:52 PM
|
|||
|
|||
|
Quote:
It is a legacy kext (+ HDAEnabler.kext), which works with the original AppleHDA.kext... RGGG, please make a screenshot with information about the video ... I do not see information about the QE in my system...  In 10.5.8 was information about the QE...  Last edited by Buhgalter; 11-26-2009 at 04:16 PM.
|
|
#85
11-26-2009, 04:21 PM
|
|||
|
|||
|
Hello buhgalter, if these kexts work that would be very very very good
I will try them out now and report back. About QE/CI OSX 10.6 is not showing those in system profiler anymore, you will have to check with http://www.realtech-vr.com/glview/ cheers MSI P5Q / C2D E8400 @ 3.0 Ghz / 8GB DDR2 800Mhz / PCIe ECS 9600GT 1Gb / ALC1200 / Windows 7 / OS X 10.8 ASUS K50IN (SX004L) / C2D T6400 @ 2.0 Ghz / 4GB DDR2 800Mhz / nVidia G102M 512Mb / 15.6" HD/LED / ALC662 / Dell 1490 802.11g / Windows 7 / OS X 10.8
|
|
#86
11-26-2009, 04:29 PM
|
|||
|
|||
|
Quote:
|
|
#87
11-26-2009, 04:37 PM
|
|||
|
|||
|
hmm, i installed the kexts, repaired permissions but no go
 the volume slider is just greyed out...MSI P5Q / C2D E8400 @ 3.0 Ghz / 8GB DDR2 800Mhz / PCIe ECS 9600GT 1Gb / ALC1200 / Windows 7 / OS X 10.8 ASUS K50IN (SX004L) / C2D T6400 @ 2.0 Ghz / 4GB DDR2 800Mhz / nVidia G102M 512Mb / 15.6" HD/LED / ALC662 / Dell 1490 802.11g / Windows 7 / OS X 10.8
|
|
#88
11-26-2009, 04:49 PM
|
|||
|
|||
|
Quote:
remove all other patched kexts for audio from S/L/E (voodooHDA, ...) run Kext Utility by Cvad. than reboot with -f It works fine for me... Last edited by Buhgalter; 11-27-2009 at 10:26 AM.
|
|
#89
11-26-2009, 05:50 PM
|
|||
|
|||
|
I will try this after work today, But, while I'm here I'm noticing something new.
I think there may be some issues with the ethernet on these machines. It is working, however I've had no luck in finding any of the network printers on our network. My Wind can see them just fine, as can every other mac in the office. I've tried connecting via IP and even that didn't work. I think I'll get a usb ethernet adapter on lunch and see from there.... Ryan
|
|
#90
11-26-2009, 07:32 PM
|
|||
|
|||
|
Quote:
It would be great if we could try the variant. I have looked at the AsusK50IN.kext, and it has some patching that is similar to the ALC662.kext that RGGG has pointed-out. I must say, that using the ALC662.kext cause a havoc and panic all around my whole system, and rendered me in a necessity of a whole reinstallation to recover. But the AsusK50IN.kext did not cause a freezing in my system. 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. ASUS X5DIN-SX176C (K50IN motherboard) / Intel Core 2 Duo T9900 @ 3.06 GHz x 2 / nVidia GeForce G102M 512 MB / 15.6" HD LED / 320 GB + 1 TB / 4 GB 800 MHz DDR2 / OS X 10.6.8 Vanilla
|
Linear Mode
