Leo4allv4.1 AMD released

[bhast2]

http://img98.imageshack.us/img98/2197/picture1wi2.png
http://img144.imageshack.us/img144/9651/picture3rv9.png
http://img222.imageshack.us/img222/8316/picture4pj1.png
So after eddie11c had things come up I started to make a new version of Leo4All
I want to take this time to thank eddie11c, Jas , Zef, Zethyroth, Dense, HotBreeze, fleebailey33, netkas, Diabolik, Kabyl, StageXNU Crew for the kernel, Chun-Nan

Like I said a BIG thank you to eddie11c with out him this would not have happened, with all of his hard work starting
leo4all.

So on to the info
This is just for AMD there will be an Intel version later this week as the packages are getting way to big for one iso.

MD5 is c01dab336260cb60d220d9e27258f3f6

Install Notes:
First and most importantly is a totally rebuilt filesystem. I still left the the ./options script
If you boot with -s at the Darwin prompt and mount your drive with
/sbin/fsck -fy
/sbin/mount -uw /
./options
you will see options to remove video drivers, account loop fix, and extensions repair. These are the most common issues so I have just automated them. If you do the account loop fix be sure to setup a proper account once booted into Leopard.

From inside the installer you will notice a lot of new options
First and for-most it boots with chameleon so it is efi and non efi boot.

The ISO has been updated to 10.5.4

ACPIPlatform:

You now have a choice between ACPIPlatforms, version 1.1.0 is the default install if nothing else is selected. This is needed for the laptop Power Management bundle to function, but if you have an older system you can choose 1.0.3 from Tiger. Alternately you can choose the stock version 1.2.1. Included inside version 1.1.0 and 1.2.1 is ACPIPS2Nub(proper version) for your PS2 support. There should be no more PS2 issues! There is a non-efi Old AppleACPIPlatform-1.0.3 and matching AppleAPIC, fixes some ACPI crashes, must be used for NO-EFI installs.

AppleSMBIOS:

I put in lots of choices for different versions based on bus speed if you want it to show your proper memory speed, or if you want your hack to look like a real mac. The default install if nothing is selected is Netkas improved version 27.
Options are:
DDR667
DDR800
DDR1066
DDR1333
iMac
MacBook
MacPro
SMBIOS for NON-EFI

Bootloader:
There is EFI v8 Bootload by Dense
Non EFI bootloader, only workd on MBR partition types

Kernel:
Since this is only AMD there is only the 9.4.0 StageXNU kernel for efi
there is also non-efi kernel 9.2.0, 9.2.2 SSE3. 9.2.0-Sleep

RemoveFireWire:

For those that have issues with FireWire, or those that just want to speed their boot time a little. This moves all of the IOFireWire kext's to /FireWire folder in the root of your install drive.

About This Mac:

This is my own little installer to customize "About this Mac" with your processor info. No it does not fix memory speed, you have to do that with AppleSMBIOS. It should work for all languages and should report overclocked CPU's properly.

Power Management:

By popular demand I added the laptop power management bundle to the install. You will still need to set it up in system preferences. This is known to have a few minor bugs. It may not report the proper time remaining or any time remaining for that matter, so use at your own risk. If you select this please do not select an ACPIPlatform, as this requires version 1.1.0.

Chipset Drivers:

(NOTE- JMicron is the only driver that always installs so please choose at least 1 option, some will have to choose 2 [if you have Marvell IDE and Intel SATA for example]) If your not sure you can click all but 1 Nforce, as they will overwrite each other.

Nforce Old - This is the older version of Medevils Nforce(1.0.2) driver. Install this if you have issues with SATA enabled causing a panic. Known to work for some Nforce3 users.

Nforce Test- If you have a SATA DVD or do not have issues booting the DVD normally choose the NforceTest.

Nforce 67- IF you have MCP67 Chipset this is the one you want to use.

SiliconImage3132 - I have not found anyone that uses this specific chipset to confirm if it works.

VIA, SiS, Marvell and SB - Please install this if you are using any of these chipsets. If you have a Marvell IDE drive please install this as they should be supported. I have added many ID's here so I hope they all work! This choice installs AppleVIAATA, AppleOnboardPCATA and AppleGenericPCATA. Confirmed working for SiS!

SAS - By request I added support for this, as of my writing this its untested. Hopefully it works.

Intel ICHx- This is in there but this iso is only for AMD so it isn't much use. I added it for the intel release coming soon.

Audio:

These choices have not changed much, only added support for STAC9271 by request. If your not sure what chipset you have, please choose AzaliaAudio(for most HD) or AC97Audio.
Choices are:
ALC850/882/883/888/889
AC97Audio
ADI1988
STAC9271
AzaliaAudio

Graphics Drivers:

I have updated many of these packages.
ATI- there are options for:
3850
3870
2600XT(PCIE)
2600XT(AGP)
3870X2
2600PRO(PCIE)
2600PRO(AGP)
X1600(PCIE)
X1600(AGP)
X19X0
X1400 Mobility

NVIDIA- I have updated the drivers to the latest available from the Mac Pro's and edited to include all Device ID's I could verify. This should cover mostly all 6XXX/7XXX/8XXX series cards. Here are the ID's supported(not all confirmed working yet) Feel free to search for yours on the list.
0x033310de 0x033010de 0x033110de 0x030110de 0x030210de 0x034410de 0x034310de 0x034110de 0x034210de 0x031410de 0x031110de 0x031210de 0x032610de 0x032310de 0x032110de 0x032210de 0x014f10de 0x00f310de 0x022110de 0x016310de 0x016210de 0x016110de 0x016210de 0x016010de 0x014110de 0x00f210de 0x014010de 0x00f110de 0x014210de 0x00f410de 0x014310de 0x014710de 0x004110de 0x00c110de 0x004710de 0x00f610de 0x00C010de 0x004510de 0x00f910de 0x00c210de 0x004010de 0x00f910de 0x004310de 0x004810de 0x021810de 0x00c310de 0x016710de 0x016810de 0x014810de 0x00c810de 0x00c910de 0x03d010de 0x03d110de 0x03d210de 0x024110de 0x024210de 0x01df10de 0x039310de 0x01d110de 0x01d310de 0x01dd10de 0x039210de 0x02e110de 0x039110de 0x039410de 0x00f510de 0x009210de 0x009110de 0x029110de 0x029010de 0x029310de 0x029410de 0x009810de 0x009910de 0x029810de 0x029910de 0x029510de 0x042310de 0x042210de 0x042110de 0x040210de 0x040010de 0x061110de 0x019310de 0x019110de 0x060010de 0x040710de 0x039810de 0x022210de

NVkush- this is by Diabolik and in my mind the best nvidia enabler.

Network Drivers:

ForceDeth- This is compatible with most Nforce LAN.
ForceDeth-V - This is compatible with most Nforce LAN(recommended version)
Skge - Driver for most Marvell LAN cards.
RTL8187- Just as it says for Realtek 8187
Zydas USB- For the USB Wireless LAN adapter
Tiger IO80211- Some Atheros cards require this Tiger version to work. Default install is IO80211 from 10.5.2
Broadcom- WLAN driver for BCM4306/4309/4318/4320/4324
RT2500- Suppose to support Dlink WMP54G v4.0, may support some others.
ViaRhine- Just as it says, for ViaRhine chipsets
Intel 100Pro VE- Just as it says, for the Intel 100Pro VE chipset
RT2860- Driver for some chipsets like WL-181, may also work on some others.

PS/2Fix:

ApplePS2Controller: Fix some dead keys on non-standard PS2 Keyboards, like / and ? on ABNT2

ABNT2: Keyboard Layout for Portuguese ABNT2. For PS2 Keyboards need ApplePS2Controller fix to work with all keys. Can be used with USB Keyboards too.

PCICard Support:
PCICard install for laptops with Texas Instruments PCI slots.

USB 2.0 Fix:
High Speed USB 2.0 fix for some people, don't install if your not sure. May cause issues auto mounting drives.

Good Applications:

You can choose to install or not, but I do recommend many of these useful programs. They include:

Adium
AppZapper
BBEdit
CandyBar
Colloquy
FireFox
Gumby 50c
Invisibles
KCNScrew
KextHelper
Marvin's AMD Utility
ASU-AMD Software Update APP
MD5
Pacifist
PackageMaker version 2.1(old harder to find)
Stuffit Expander
Textmate
Transmission
TubeSock
Unison
VLC
Xbench

for support go to fusion.osx86.hu channel #leo4all
forum is leo4all.uni.cc
and you can get support at theflee.nfshost.com

Thanks for the help everyone with beta testing it
Intel version will be next week!!

Now get those Hackint0sh fired up

bhast2

PPF to fix the Nvidia cards that are bigger than 256 and adds chameleon to be the default bootloader and this will fix dual boot problems
Leo4allv4.1 ppf (http://www.mediafire.com/download.php?mhkbr2jjlp3)

[musicmixer04]

Okay... I've tried every thing i've burnt the dvd with three different programs.... tried -v -s -x i've tried cpus=1 but booting disk always hangs on "Loading HFS+ file [/System/Library/Extensions/TMSafetyNet. kext/Contents/MacOS/TMSaftyNet ] fcrom 4230a80" I've also down loaded it several times.....



here's a link to my computer's spec's I know it meet requirements

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01490659&lc=en&dlc=it&cc=it&lang=it&product=3755785

now on my second laptop

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00846886

so far it has passed what it has done on the top one haven't ran into any problems yet.... not sure y is hangs on the top one?

thanks for any feedback

[Derwood]

After applying the ppf, it installed and everything works, except onboard LAN (as usual). Looks great, Thanks bhast.

[iero]

Hello,

How can I enable the SAS chipset driver support during the boot process ?

It cannot see my drives, and it seems that AppleLSISomething is not loaded.

Something to do/try ?

Thanx !

iero.

[CyCLoBoT]

Just installed this today. Everything is working great so far. Good job man!!!

[Aydinz]

what are the differences between this release and v3?

[finaldata]

noob question... could somebody slap me in the face and tell me where i could download it? :)

[R0GUE]

Ahar! Salty sea dogs and green demons. Now consider yourself slapped :P

[Voyn1x]

lol @ R0GUE :D

[finaldata]

slap me again! :( still can't find it...

[nfoav8or]

finaldata, forum rules do not allow us to specifically say where to download... i.e. list a site for you to go to. Rogue is giving you a hint to a couple torrent sites that may host the file you are looking for but cannot state them explicitly. If the hints Rogue has given don't make sense then you need to do a little research on these sites before looking into obtaining any version. Keep looking. :D

[finaldata]

ahhhhh..... hahahahahaha.... dumb ass me..... thanks a lot....

[nfoav8or]

Good. :cool: now let us know how it works when you are done "obtaining" it.

[dracea]

i have a problem when i am trying to update with AMD Software Update the pc freez and i need to shut it down and reboot ... what can be the problem?

only when is unpacking .... everything else works fine

[iPodAddict181]

argh, i cannot seem to find a way into the green demon's belly! i must be invited inside to dine. and those salty sea dogs aren't doin it for me!

[CamEdwardo]

awesome release :D
works perdect on my amd setup :D
will post my specs in a bit.

thks to all who spent there time on this.

-Cameron

[mrhack]

Hi,

I have version 2 running quite happily. Is it possible to upgrade to version 4 with this new iso from version 2 without doing a complete reinstall?

Thanks,
Ben.

[rocafellabryan]

I'm thinking about trying this on my HP dv2125nr. I've got the Kalyway 10.5.2 AMD working pretty decent, but the only problem right now is the sound and wifi. Perhaps this will get the rest of those little issues.

[nfoav8or]

I have version 2 running quite happily. Is it possible to upgrade to version 4 with this new iso from version 2 without doing a complete reinstall?


What is the need for an upgraded iso when you can update from Apple using ASU?

the only problem right now is the sound and wifi.

You don't need to aquire a NEW distro in order to make your sound or wifi work. Most times those (specific) installers on the iso can be found (or given to you from someone who has the distro already) from somewhere on the web.

But thats just my opinion...

when you were using windows on your machine, what was the brand of the sound and wireless?

I think THESE (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00771060&lc=en&cc=pt&dlc=en&product=3245594&rule=38787&lang=en#N373) are your specs for the hardware, but being direct from HP they aren't giving me too much info to go on.

[rocafellabryan]

What is the need for an upgraded iso when you can update from Apple using ASU?



You don't need to aquire a NEW distro in order to make your sound or wifi work. Most times those (specific) installers on the iso can be found (or given to you from someone who has the distro already) from somewhere on the web.

But thats just my opinion...

when you were using windows on your machine, what was the brand of the sound and wireless?

I think THESE (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00771060&lc=en&cc=pt&dlc=en&product=3245594&rule=38787&lang=en#N373) are your specs for the hardware, but being direct from HP they aren't giving me too much info to go on.

I went off their driver download page for my laptop. The drivers for the sound are "conextant high definition", the "NVIDIA Nforce chipset", and the Broacom Wifi.

Would you mind if I sent you a PM? I don't want to clutter this thread with my current issues.

[Timbo]

I can't install cause it won't recognize my sata boot drive which is connected to a onboard sil3132 controller (sata mode not raid). This worked fine with older releases like "Kalyway_10.5.2_DVD_Intel_Amd" for instance. It sees the drives on the Nforce controller though. Any ideas?

Mainboard
ASUS KFN5-D SLI

[GRoMeSTeR]

Hi,

Can someone help me. I cant figure out why the DVD I burned (single layer and dual layer) seems to be corrupted but the burner says successful. Burner (Nero).... same problem on unpatched iso and patched iso... MD5 check is okay for the unpatched iso. Is there any setting in the burner that I need to change because I use the defaults...

System : HP Pavilion dv2620us...

Hoping that I can install it...

[Gokciim]

Where to download that version ?

[nfoav8or]

I can't install cause it won't recognize my sata boot drive which is connected to a onboard sil3132 controller (sata mode not raid). This worked fine with older releases like "Kalyway_10.5.2_DVD_Intel_Amd" for instance. It sees the drives on the Nforce controller though. Any ideas?

Mainboard
ASUS KFN5-D SLI

this should be supported. boot with "-f" to ensure it is loaded.

I went off their driver download page for my laptop. The drivers for the sound are "conextant high definition", the "NVIDIA Nforce chipset", and the Broacom Wifi.

Would you mind if I sent you a PM? I don't want to clutter this thread with my current issues.

sure, send away.. but I will be at work for a while today. I'll work with you when I get home.

[lj007]

hey does anyone mind giving me the md5 sum for the patched disc

i want a clean install and want all my sums to match

[shackn]

Thank-you for the effort this works for me!

Basically I did what best could be describe as the "noob" install... I paid very little attention to detail, as it going to become a "Mac" for my 8 year old daughter. When I installed it I just checked every option I thought remotely necessary and it works! I then upgraded to 10.5.5 (actually I installed every update available including the JAVA ones) and it still works (using the AMD updater). So my problem after installing all the software and updating is that it will not shut down properly and just hangs or more commonly has a Kernel panic. Otherwise it is brilliant!

A couple of points:
1. To install it I had to have the BIOS option for a USB enabled keyboard and mouse disabled. (The mouse is USB and the keyboard is PS2)
2. It did not work from the SATA drive but did from the IDE drive

Hardware
AMD 939 x2 4200+
MB GA K8N51GMF-9-RH (latest BIOS)
8500GT (runs two displays)
LAN: Generic card with Realtek 8169 (could not get the onboard to work and could not be bothered trying)
2Gb DDR400
160Gb IDE
200Gb SATA2

Thanks in advance

[mrhack]

Well I've installed it but it will boot only if the dvd is in the dvd drive. Its almost as if the boot record is not being found on the hard drive. I tried both efi and non-efi variants with the same result. Did not have this problem with leo4Allv2.

Here are the relevant specs:
ide hard drive
ide dvd reader/writer
Lanparty nf4 nforce motherboard with 4200+ amdx2

I could live with this, but its a tad annoying. Anybody know of a fix? Perhaps this is a generic issue?

Cheers.

[nfoav8or]

Well I've installed it but it will boot only if the dvd is in the dvd drive. Its almost as if the boot record is not being found on the hard drive. I tried both efi and non-efi variants with the same result. Did not have this problem with leo4Allv2.

Here are the relevant specs:
ide hard drive
ide dvd reader/writer
Lanparty nf4 nforce motherboard with 4200+ amdx2

I could live with this, but its a tad annoying. Anybody know of a fix? Perhaps this is a generic issue?

Cheers.

This basically means that chameleon did not install during your installation. use the DVD to boot up then go download chameleon (http://chameleon.osx86.hu/) and install it. point it to the partition you have OS X installed on and <boom> it should work now.

Or you could choose from a host of other bootloaders that do the same thing but in a different way. either way, thats the path. Enjoy OS X.

[mrhack]

Thanks man! That did the trick. I didn't think it was going to work because I'd already tried installing it with osx86tools, but that didn't work, but your link certainly did, so thanks!

I must say I'm really chuffed with leo4all4.1. I had v2 a while back but that was so much more unstable and most programs that I wanted to work just wouldn't load up. Now I have iWeb and most importantly logic pro all running nicely

Cheers!

[diablo63]

I would like to let people know that this will work on a Toshiba A105-S4054 with a Intel Core Solo (T1350), 4G (2x2ddr2-667), 320G WD Scorpio Black HD, BCM4311 wifi card (this dev id had to be added :14e4,4315).
Sound, video, usb, pcmcia, wired ethernet, wifi, vga adapter, volume knob, headphone jack are working.
I have it updated to 10.5.5 with ASU .
I also have it dual booting with WindowsXP sp2 media center edition (came with the laptop).

[ipapun]

Can you please give me some steps so i can use all drivers......

Here is my Config.

AMD anthlon 3000+ ~1.8GHZ
Asus M2N-MX Motherboard
nForce 430/ Geforce 6100 Chipset
ALC 662 high Def. Audio

[nfoav8or]

Can you please give me some steps so i can use all drivers......

Here is my Config.

AMD anthlon 3000+ ~1.8GHZ
Asus M2N-MX Motherboard
nForce 430/ Geforce 6100 Chipset
ALC 662 high Def. Audio

have you attempted to "Customize" during the install?

EDIT: sorry, I just read your post over at the iDeneb thread.

use the forcedeth Lan fix.. you'll need to edit your info.plist with your devID. There are plenty of sources here in the forum for help with this. There is also the nForce LAN driver (http://forum.insanelymac.com/index.php?showtopic=125569&st=0) that you can read about and apply to your system.

[kr_krack]

Besides other releases i've tried this release too but the same infamous error "Still waiting for the root device" appears, although it seems that the chipset is recognized. From what I read it seems i have a bad combination of hardware. I've tried boot options from here http://wiki.osx86project.org/wiki/index.php/Technical_FAQ#Q:_What_are_the_solutions_to_the_.22 Still_waiting_for_root_device.22_message.3F but with no luck.
Here is my hardware configuration, dvd-rom is slave and sata drive tertiary master (I guess this is by default)

> Mainboard : Abit KN9(NF-MCP55 series)

> Chipset : nVidia nForce 570 Ultra

> Processor : AMD Athlon 64 X2 3600+ @ 2000 MHz

> Physical Memory : 1024 MB (2 x 512 DDR2-SDRAM )

> Video Card : NVIDIA GeForce 7600 GS

> Hard Disk : SAMSUNG (250 GB) 2504c SATA II

> DVD-Rom Drive : TSSTcorp CD/DVDW SH-S182M SATA


Is there any solution or it simply doesn't work for my hardware ?

[RJazz117]

I guess I'll try this distro next, since I DO have an AMD system...maybe THIS is the Magic Bullet.

[l2ounak]

why isnt my internal hard drive not being detected in disk utility :(
I see nothing there :(

also, i cant change anything from the bios menu when i go into system menu by pressing f10 at startup screen. Ive been told that changing your drive from AHCI to Compatibility might result in your drive showing up in disk utility.
Could some one help me how to do it!
Please!
Thanks :)

I have an HP Pavillion dv6607nr
AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53
Motherboard Manufacturer - Quanta, Model - 30CF
Chipset and Southbridge - NVIDIA nForce 560
BIOS: Brand - HP, Version - F.07, Date - 08/09/2007
Memory: 1024 MB DDR2
GPU - Standard VGA Graphics Adapter A1

More info regarding configuration is attached as text file (I used CPU-Z)

[l2ounak]

Besides other releases i've tried this release too but the same infamous error "Still waiting for the root device" appears, although it seems that the chipset is recognized. From what I read it seems i have a bad combination of hardware. I've tried boot options from here http://wiki.osx86project.org/wiki/index.php/Technical_FAQ#Q:_What_are_the_solutions_to_the_.22 Still_waiting_for_root_device.22_message.3F but with no luck.
Here is my hardware configuration, dvd-rom is slave and sata drive tertiary master (I guess this is by default)

> Mainboard : Abit KN9(NF-MCP55 series)

> Chipset : nVidia nForce 570 Ultra

> Processor : AMD Athlon 64 X2 3600+ @ 2000 MHz

> Physical Memory : 1024 MB (2 x 512 DDR2-SDRAM )

> Video Card : NVIDIA GeForce 7600 GS

> Hard Disk : SAMSUNG (250 GB) 2504c SATA II

> DVD-Rom Drive : TSSTcorp CD/DVDW SH-S182M SATA


Is there any solution or it simply doesn't work for my hardware ?


hey, i had the same prob and someone gave me a solution to it!
TRY THIS!

1. Get the UUID for the install partition on your external.
Boot the DVD and go into Disk Utility. You can see your external. Right click your install partition and select information. You should now see a long alphanumeric string Something like: "CC3DCCBD-1CF3-3FEE-8D50-625375FEBF3D". Copy this Unique Identifier to a sheet of paper and shut the computer down.

2. Boot using the UUID
Start your machine up with the DVD and type

-v boot-uuid=PUT_YOUR_UUID_HERE

It worked for me, it takes about 5-10 mins though and it seems to be stuck on one line. Be patient and it should boot up! :)