PDA

View Full Version : ECS 945GCT-M/1333 v3.0


fbifido
09-20-2008, 08:54 PM
I have this motherboard:

http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=830&CategoryID=1&DetailName=Specification&MenuID=1&LanID=0

I have installed iATKOS v4i
and only the sound does not work?

I am tring all the ihachingto... i can download on this machine.
it has 1Gb DDR2
80GB IDE Hard Drive
DVD Rom/CD-RW combo drive
Celeron 420 1.6 GHz

Spec(s):

CPU LGA775 socket for latest Intel® * Wolfdale/ Core™2 Duo /Pentium Dual Core/* Pentium D / Celeron 4 xx series/ Celeron D Processors
FSB 1333*/1066/800/533 MHz
* 945GCT-M/1333 v3.0 is capable to support Wolfdale processor through BIOS update. Please refer to BIOS download.
* This board is ready to support Intel® Pentium D and Pentium 4 processors
*Supports FSB1333 processors through H/W and BIOS modification.



CHIPSET Intel® 945GC & ICH7
North Bridge: Intel® 945GC
South Bridge: Intel® ICH7



GRAPHICS Integrated Intel® Graphics Media Accelerator 950 ( GMA950 )
Max Dynamic Video Memory up to 224MB(System Memory greater than or equal to 512MB)



MEMORY Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 4 GB
Support DDR2 667/533/400 DDR2 SDRAM
* After ECS validation, this board can support DDR2 max to 4GB, please refer to memory support list



EXPANSION SLOT 1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots



STORAGE Supported by Intel®ICH7
2 x Ultra DMA100/66 devices
4 x Serial ATAII 3.0Gb/s devices



AUDIO IDT 92HD202 6-channel High Definition Audio Codec



LAN Realtek RTL8101E 10/100 LAN (co-lay 8111B)



REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x Serial port (COM1)
1 x VGA port
1 x RJ45 LAN connector
1 x Audio port



INTERNAL I/O CONNECTORS & HEADERS 1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
1 x IDE connector
4 x Serial ATA connectors
1 x SPDIF out header
2 x USB 2.0 headers support additional 4 USB Ports
1 x Clear CMOS header
1 x Front panel header
1 x Front panel audio header
1 x IrDA for SIR header
1 x LPT1 header
1 x CD in header
CPUFAN/SYSFAN connectors



SYSTEM BIOS AMI BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification



FORM FACTOR Micro-ATX Size, 244mm*220mm

Voyn1x
09-21-2008, 10:24 AM
Hmm, i've never heard of this chip before. Sorry to say, but i think your best bet might be getting a cheapo usb sound card.

evojoey
10-17-2008, 07:22 AM
I too have the same mobo what is a good pci sond card to get to get audio working thanks

Ianxxx
11-24-2008, 11:45 PM
look here
http://www.insanelymac.com/lofiversion/index.php/t73624.html

milanca
11-25-2008, 02:41 AM
Hi,

this board looks very nice to me. try to go vanilla with it. not sure with this one but maybe to upgrade with some of C2D processors if budget allows it. it could be a very nice machine.