Zephyroth Leopard 10.5.1 AMD - Rev. 2 - Discussion Thread

[mr.mario]

hello

I am sorry for my English
I have HP (Pavilion dv6240eu) and I can`t format disc
so I installed on disc USB maxtor 200gb, it pretended to install
but during it starting it moves only -x
Do You alredy Own a Mac? I press continue and it freeze (always lan cabel off)
I installed five times, always the same effect !!!

I do not know what I have to do , can it will help rev.2 but where from to take

[prateesh]

Thanks for this solution zephyroth

I will try it tonight [I am a working man only find time at nights :( ] and keep you posted with the experience :)

[zuz242]

did you try the other solutions mentioned in the wiki? for me setting the resolution very low worked..


mr.mario:hello

I am sorry for my English
I have HP (Pavilion dv6240eu) and I can`t format disc
so I installed on disc USB maxtor 200gb, it pretended to install
but during it starting it moves only -x
Do You alredy Own a Mac? I press continue and it freeze (always lan cabel off)
I installed five times, always the same effect !!!

I do not know what I have to do , can it will help rev.2 but where from to take

[prateesh]

zephyroth,

Just for confirmation
I have to apply ur suggest solution in the terminal utility after booting from the DVD
or on the boot menu of dvd with flag as -s !!!

And also to mention that i have nvidia geforce go 1650 graphics card .... if I remove all the kext related to geforce & nvidia won't it break something other ????

[Puttabong]

prateesh, don't worry, It's not going to break anything.

To get rid of that firewire error whilst booting (in your case in single user mode), disable 1394 (FireWire) in BIOS.
It's not a problem to re-enable it later, as it will work.

Just disable it for now, and when your System will be set up,
then enable it again and you'll be able to use FireWire flawlessly.

Boot with -s again, or if it doesn't work, boot the dvd and use the built in Terminal.

Make sure that you type these commands as given:

mount -uw /
rm -rf /System/Library/Extensions/GeForce.kext
rm -rf /System/Library/Extensions/Ge*.kext
rm -rf /System/Library/Extensions/NV*kext
exit
After you successfully booted up your system (and only if you are on Rev.1),
install zephyroths NVIDIA drivers, which can be found at the wiki http://osx86.wikidot.com

[lugmor]

I remove all GeForce and NV kext's and remove -v -legacy. Works fine for me without trouble. Big thanks for all people who work on this project and for helping us to run it on AMD machines.
My comp. runs on both cores.
Problem is with booting(can't boot at all and for booting i\m usinf tiger-install tiger and over it iinstall leopard and problem solved).
Thanks again and god bless u all.

[Puttabong]

:) Nice!

The bootloader is also easy to fix though!

[lugmor]

Puttabong thanks for posting fast.Will u tell me how to fix booting without installing tiger first. I try'd with fdisk -e /dev/rdisk0s1 and all similar apraches but still nothing.
One question. When will be rev.2 and will it be ppf file or whole DVD. I ret'd to putt darvin boot loader in this AMD leo but still did not test it ( i putt it like in iatkos 1.0i in disk utility folder).
Thanks in advance your truly friend Lugmor.

[Xxp/TuX]

Puttabong::) Nice!

The bootloader is also easy to fix though!

lol...Really?. Maybe I need a bootloader on my head (kidding)!. lol :D

[Puttabong]

Did you install with MBR or GUID?

[lugmor]

MBR

[tgois]

Hi,
i have a MSI Megabook S271,
i don't help testing the new version!

[binhu]

I downloaded MAC 10.5 for PC AMD

My PC
Athlon64 X2 4800+
nvidia Geforce 6150se/nforce430
seagates sata 320gb
samsung 667 ddr2 1gb*2
when i install MAC, erase HD,it error

http://img217.imageshack.us/img217/2752/img0043ti6.jpg
sorry, my (Edited By; Wyatt) English* is very bad

Edited by Roisoft: No links to torrent files, please.
edited by ROisoft 2º: NO LINKS TO TORRENTS OK? LAST WARNING!!!!

[mr.mario]

Hello
Puttabong and Zephyroth

I have the same problem what (binhu)
please give me link for beta tester
sorry for English
thanks

[shaq t]

Hi,
Puttabong and Zephyroth

thanks for works

rev.2 support to guid bootloader? (performance review)
and

do you have recommend motherboard (i've 690g mb)

[bhast2]

Processor
Manufacturer AMD Athlon(tm) 64 X2 Dual Core Processor 5000+
Clock Speed 2.6GHz
L2 Cache Size 1024

Processor
Clock Speed 2.6GHz

Memory
3 gigs

Network Card
Adapters NVIDIA nForce Networking Controller

Storage
Drive Type Drive Size Total Available Space Used Space
C: NTFS 298.0Gb 273.7Gb 24.27Gb
J: NTFS 186.3Gb 66.23Gb 120.0Gb

Storage

Hardware
Type Description
DVD/CD-ROM Drives HL-DT-ST DVD+-RW GSA-H73N SCSI CdRom Device
HL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device
Disk Drives SAMSUNG HD321KJ SCSI Disk Device 298.0Gb
AFT PRO -8MX CF USB Device
AFT PRO -8MX MS USB Device
AFT PRO -8MX SD USB Device
AFT PRO -8MX SM/XD USB Device
Maxtor OneTouch III USB Device 186.3Gb
Display Adapters NVIDIA GeForce 8400 GS 256Mb
IDE ATA/ATAPI Controllers Standard Dual Channel PCI IDE Controller
IDE Channel
IDE Channel
NVIDIA nForce Serial ATA Controller
NVIDIA nForce Serial ATA Controller
Keyboards HID Keyboard Device
Microsoft eHome Remote Control Keyboard keys
Microsoft eHome MCIR Keyboard
Microsoft eHome MCIR 109 Keyboard
Mice and Other Pointing Devices HID-compliant mouse
HID-compliant mouse
HID-compliant mouse
Monitors Dell SE198WFP(Digital) - Dell Inc.
Sound Devices USB Audio Device
High Definition Audio Device
USB Controllers Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller


these are my spec could i be a beta tester thanks
bhast2

[laddyboy]

I guess we should stop asking to be beta testers. I've asked 2x and didn't even get the courtesy of a reply. I'm just going to wait patiently.

[megaargon1]

I agree, and just to let you know 10.5.2 has released.

laddyboy:I guess we should stop asking to be beta testers. I've asked 2x and didn't even get the courtesy of a reply. I'm just going to wait patiently.

[cdummy]

Any idea when when rev 2 is coming? I'm kind of lucky guy running Leo on one of my machine(Asrock 775Dual-915GL 10.5.1 Kalyway GUID) with no problems, but I have Compaq laptop and my second machine both based on nvidia mcp51 and rev.2 is my big chance. I see from discussion that this nvidia chipset should be supported at least in case of SATA, not sure about keyboard or mouse. Thanks for all the work Zephyroth.

[delian7]

10.5.2 has been released? The moment has come? HALELOOYAH! (lol) Can you give me the download link??

[bhast2]

if it has been released? Where can we get it at?

[zephyroth]

10.5.2 Apple update has not been released yet ... So my ISO has not been released too.
And for those who complain that I've not reply to their request of being beta testers ... If you knew how many people asked me ...

[prateesh]

Just want to share my experience of 10.5.1 release

"Resolution was very low ... tried Zephyroth NVidia Universal Installer .... But no luck
"my Video card is this on 6150 http://www.nvidia.com/object/mobogpu_nb_6series.html"
"Lan did'nt worked neither my broadcomm wireless"
"DVD writer deteted properly & working perfactly"
"NO QE/CL for me :("
"Sata Hdd is readonly"
"No Sound from my Conexant Cx20549 @ nVIDIA nForce 430 (MCP51) - High Definition Audio Controller PCI"


But there are other problem also like
HDD won't boot without DVD in drive
Sometime error comes because of which "Still waiting for root device" comes ( I mean if i try to boot 5 times then 1 time is success rate)

Any suggestions/Solution for my problem

[sh0td0wn]

For sound, get AppleAzalia ALC88x kext, it will work for you since we got the same one.
LAN, buy one of those 10$ Realtek cards or find them somewhere if you kept all of your used ones at home.

I have no help on your 6150, it seems that we can't have QE/CI on onboard GPUs that use system memory.

[megaargon1]

May be I shouldn't trust those Mac Rumors sites. According to an actual version tracker site, MacOSX 10.5.2 is in its last step before being finalized. It shouldn't be long. Zephyroth's DVD can be here today or tomorrow. According to the talk I had with Apple, Rep told me 10.5.2 is in its last stage, RC2 (in Windows Language, lol). Once the final is released, Zephyroth will integrate that update and upload the final copy of rev. 2 on all of our favorite P2P sites. I can't wait. This is going to be great. Let's all consider donating Zephyroth for his efforts! Zephyroth, do you accept Paypal,? :-)

delian7:10.5.2 has been released? The moment has come? HALELOOYAH! (lol) Can you give me the download link??

[JoeTheWise]

bhast2:Processor
these are my spec could i be a beta tester thanks
bhast2


I think we must stop to ask for be beta testers, 10.5.2 will come out in few days and so Zephiroth rel.2 I think.
I think also that Zephiroth is able to contact everyone on this site or on Insanely Mac (by PM, mail, everything) if he needs someone for test. If he don't needs more testers maybe there's a reason.
For me I contributed in testing video drivers on 8800GT, but no beta testing and I am waitng patiently for the release using Zephiroth Rel.1 as my primary system.
So: Good work Zephiroth, take your time, keep us informed on progresses!

[delian7]

I am so excited and can't hardly wait for the 10.5.2 release to be released. Does anyone know if you have to have tiger installed than update to leopard for it to boot properly. Also does anyone know whether my LAN which is: Realtek RTL8201N will be supported in 10.5.2? Also my video card which is: NVIDIA GeForce 6150SE nForce 430, and my sound card, Realtek High Definition Audio driver version 6.0.1.5502 will they have compatibility in 10.5.2?

Oh because I am a noob, if I didn't specify any hardware specifications, you can find all about my computer at this page:
http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&cc=us&dlc=en&product=3440614&os=2093&lang=en&

Thank You everyone, and thank you Zephyroth for your constant work on the release of 10.5.2.

[sh0td0wn]

Hmmm, I don't think there were ever onboard 6150s on real Macs but if somehow can someone can edit the Intel Graphics Media Accelerator 950 or X3100 kexts since they are onboard graphics that use system memory I think.

I hope that the new nForce ATA uploaded by MeDevil are included in 10.5.2 Rev 1.

[C.Logan]

Hey zephyroth
I know you probz dont need any now but i will be happy to beta test your Amazing Project
My systems specs are:
Abit NF-M2S Motherboard
AMD X2 3800+
Built in sound (Realtek) and external USB Sound card(C-Media)
4GB of ram
Nvidia 7900GT
160GB Sata Seagate HD
400GB IDE Seagate HD
Anyways well done on this amazing project! If you accept Donations send me the link
Or if you accept paypal :-)
Cheers, C.Logan

[Chagani]

Hi all,

I realize that zephyroth is still working on the Rev. 2 and will release it when he is ready, however, I was wondering if us Rev. 1 guys could get the updated Nforce LAN drivers (force-deth) in order to use 2 CPU cores without Leopard freezing.

Thanks,

Chagani

[lugmor]

Still problem with booting if install leopard without tiger before but my system using 2 cores AMD X2 6000.

[7eventh]

Chagani:
I was wondering if us Rev. 1 guys could get the updated Nforce LAN drivers (force-deth) in order to use 2 CPU cores without Leopard freezing.


I second that request ... or was it already posted somewhere?

[delian7]

sh0td0wn:Hmmm, I don't think there were ever onboard 6150s on real Macs but if somehow can someone can edit the Intel Graphics Media Accelerator 950 or X3100 kexts since they are onboard graphics that use system memory I think.

I hope that the new nForce ATA uploaded by MeDevil are included in 10.5.2 Rev 1.

Was that an answer to my question which is:
delian7:I am so excited and can't hardly wait for the 10.5.2 release to be released. Does anyone know if you have to have tiger installed than update to leopard for it to boot properly. Also does anyone know whether my LAN which is: Realtek RTL8201N will be supported in 10.5.2? Also my video card which is: NVIDIA GeForce 6150SE nForce 430, and my sound card, Realtek High Definition Audio driver version 6.0.1.5502 will they have compatibility in 10.5.2?


Oh because I am a noob, if I didn't specify any hardware specifications, you can find all about my computer at this page:
http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&cc=us&dlc=en&product=3440614&os=2093&lang=en&

Thank You everyone, and thank you Zephyroth for your constant work on the release of 10.5.2.

Sorry that sounds kind of mean/rude but I really want to find out...

[sh0td0wn]

Yeah. It was an answer to that.
I have the same problem... No QE/CI..
Best bet is to get those cheap nVidia 7xxx GPUs since they are compatible.

Just wondering if 8600 GTS is supported in the nVidia installer because I will be replacing my onboard with this very soon.

[cgsheen]

sh0td0wn:Just wondering if 8600 GTS is supported in the nVidia installer because I will be replacing my onboard with this very soon.Mine is working just fine... So is our 8600GT.

[lugmor]

Hey Zephyroth is there any chance that u can make ppf file that can set com.apple.boot.plist form -v -legacy to -x (safe mod) that people can boot and delete GeForce and NV kext's and to set boot if they canot boot without DVD.
That is my problem and many others. Only solution is that one, as i can see from my point of view. I know that rev. 2 is coming soon but that will be very nice if u want to do that. I will try to see what can I do but one way or another everything is up to you.
Thanks in advance and we all waiting for your rev.2.

[X_LaMer]

Hi Zephyroth! I'm from russia and on our national bit-torrent sevrer there are a lot of people who waits your Rev. 2... If I only could place Rev. 2 on our torrent server, there woul be much more comments, how your new build works... Besides, I, myself, have AMD s939 4200+ processor and can hardly wait to install the newest build of MacOS X Leopard on my computer! Can you give me an ability to download Rev. 2 ?

[DoiX]

xlamer.. rev2 :) is still in beta :) so.. its not released to the public

[altair1979]

Here's my problem with Leo AMD Rev.1, I don't think it's mentioned before, so here it is :

I installed Leo on my AMD 64x2 AM2 4200+. Nothing went smooth, I got ALL kinds of errors, 1 minute Hang, NVidia and GeForce kernel panic, can't boot without DVD, you name it. Using suggestions found here and on insanelymac I got through all those problems (still can't boot without DVD though, tried evereything). So I get to the Setup Assistant where my USB keyboard is identified, languge options and finally "User Account Creation". I just enter login info and then everything freezes with beach ball spinning and a message saying "Creating User Account". Using MacDrive I can see all accounts I tried to enter were indeed created. So I try anything I can find, disabled onboard LAN, even booted with "Graphics Mode"="640x480x32" and it seemed to work 'cause I got a message saying that "The setup assistant can't start in this resolution" (or something like that), but when I press OK so everything can continue, guess what...grey screen with th beach ball. And that's it, nothing beyond that. Any help would be apreciated, however I don't expect much.

P.S. I'm using MSI K9n - Nforce - 550

Other than that Zeph you're the man, keep up the good work, and hurry up on that Rev.2 thing...can't wait!!!

[xlslx]

Iam using a Turion 64 X2 but i cant help you with that.
the only thing is that there will be NO final Rev.2!

It will be 10.5.2 Rev.1 ;) (not 10.5.1 Rev2) ;)

[roisoft]

Nvidia Kext (9c30)

http://scottdangel.com/files/NVInstallerV.32.pkg

[altair1979]

roisoft:Nvidia Kext (9c30)

http://scottdangel.com/files/NVInstallerV.32.pkg

is this .pkg supposed to help MY problem? and if it is then how can I use it? I don't know how to install .pkgs

[R0GUE]

altair1979:is this .pkg supposed to help MY problem? and if it is then how can I use it? I don't know how to install .pkgs
Just double-click on the package to install ;-)

[bajanboy]

Hi,

I am very interested in beta testing the Zephyroth Leopard 10.5.1 AMD rev2, can anyone tell how/where I can obtain a copy, I also want to say that I truely appreciate the effort and time that goes into the creation and distribution of this software.

When can we expect the rev2 release?


My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3
Video Card: NVIDIA gForce 7300GS
Hard drives: WD 250SATA, WD 320 SATA
Maxtor 160 IDE
CPU: AMD Athlon 64x2 dual core 4200+

Cheers

[Cromwell]

bajanboy:
My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3

Cheers
DDR3? I doubt it... (I have the same mobo)

[bajanboy]

Oops! typo on the memory, I meant to say 4gig of DDR2 memory, in any case is there a copy of the Rev.2 beta available yet?

btw, I am using Rev.1 and it' s running just fine after some playing around.

[shaq t]

bajanboy:Hi,

I am very interested in beta testing the Zephyroth Leopard 10.5.1 AMD rev2, can anyone tell how/where I can obtain a copy, I also want to say that I truely appreciate the effort and time that goes into the creation and distribution of this software.

When can we expect the rev2 release?


My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3
Video Card: NVIDIA gForce 7300GS
Hard drives: WD 250SATA, WD 320 SATA
Maxtor 160 IDE
CPU: AMD Athlon 64x2 dual core 4200+

Cheers

me too, i want

[tiagor]

.

[xlslx]

no one (official beta tester only) will get/have a copy of 10.5.1 Rev2. The Final will be 10.5.2 Rev.1 which will be a public release. so please stop asking....the release will be soon (until 10.5.2 is released by apple)

[7th]

shaq t: bajanboy:Hi,

I am very interested in beta testing the Zephyroth Leopard 10.5.1 AMD rev2, can anyone tell how/where I can obtain a copy, I also want to say that I truely appreciate the effort and time that goes into the creation and distribution of this software.

When can we expect the rev2 release?


My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3
Video Card: NVIDIA gForce 7300GS
Hard drives: WD 250SATA, WD 320 SATA
Maxtor 160 IDE
CPU: AMD Athlon 64x2 dual core 4200+

Cheers

me too, i want

Gosh, I have almost the same config but can't use the rev1 =\
Were you able to install rev1 into anyone of your SATA hard drives? I think you installed it into your ATA, isn't it? If not so, how did you do it?

Thanks!

[tgois]

xlslx:no one (official beta tester only) will get/have a copy of 10.5.1 Rev2. The Final will be 10.5.2 Rev.1 which will be a public release. so please stop asking....the release will be soon (until 10.5.2 is released by apple)

And when will that be?
I'm going crazy with the waiting!!!

[xlslx]

ask Apple! i dont know when it will be released to public finally, but this will be within the next days hopefully not weeks ;)

And for Zephyroth and all Testers:

I got Leopard Rev.2 Beta 2 WORKING on my HP Pavilion dv6130eu - AMD Turion 64 X2 Notebook - dont ask how . it was like walking through the hell - 2 times!....but i installed it ONLY using -v Bootflag successfully on my SATA Drive. But booting from HDD works only over USB2! on SATA i got the com.apple.Boot.plist not found error. Any Fixes here?
Twice my PS/2 Keyboard and Mice didnt work everytime, they only work SOMETIMES, really!. My Conexant HD Audio works, but the Sounds are choppy. nForce 4 LAN didnt work, my CPU isnt detected correctly under About this Mac (it means 1,6Ghz Unknown) but the System Info detects my 2 Cores correctly. The next thing. It knows my BCM4311 Broadcom WLAN Chip but it didnt works too. Did i forgot something!?....yeah the Graphixx

Yeah, so here are my issues in a list: (i hope Zephyroth and all others can help me (Zeph please correct it in the next release if possible))

- nForce 4 SATA Drivers didnt work correctly (install worked over SATA, booting not -> com.apple.boot.plist not found error, with every bootflag, pc efi 8 already fixed <- works!)
- nVidia GeForce 7200 Go didnt works (QE not supported, CI dont know yet) (Zeph: Your mpkg nvidia installer dont works -> The Mac Installer Program aborts (error) - will test it tomorrow twice!)
- Broadcom BCM4311 (PCI-e) is known, but not working!
- my PS/2 Keyboard and Synaptics Touchpad only working SOMEtimes (works when a USB Keyb or Mice is attached - subjective feeling)
- Conexant HD-Audio Chip works, The System Info means (no Audio (built-in) detected) but sound is there, but very choppy!)
- optional: 1,6Ghz Unknown -> CPU Detection didnt works.

PS: 4 Bonkey/Zeph/Puttabong: The Fixed Packages Directory is empty (The Packages are 0 bytes in size!)

Thanks, and i hope somebody can help my with any problem!

Greets Martin

[bajanboy]

shaq t:
bajanboy:
Hi,

I am very interested in beta testing the Zephyroth Leopard 10.5.1 AMD rev2, can anyone tell how/where I can obtain a copy, I also want to say that I truely appreciate the effort and time that goes into the creation and distribution of this software.

When can we expect the rev2 release?


My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3
Video Card: NVIDIA gForce 7300GS
Hard drives: WD 250SATA, WD 320 SATA
Maxtor 160 IDE
CPU: AMD Athlon 64x2 dual core 4200+

Cheers


me too, i want


Gosh, I have almost the same config but can't use the rev1 =\
Were you able to install rev1 into anyone of your SATA hard drives? I think you installed it into your ATA, isn't it? If not so, how did you do it?





I actually had no problems installing Rev.1 with the exceptions of not being able to install on SATA drive(But I can read from them, not write to them) and install a kext for my audio to work. I have recently discovered that there is a new AppleNForceATA.kext out there that will allow you to read/write to SATA drives but in order to install on SATA drive you will have to inject it into the .ISO file, I am still playing with this until Rev.2 is available.

[xlslx]

The Rev.2 will never be final for public - 10.5.2 Rev.1 will be the next public available version. So wer´re all waiting for Apple´s 10.5.2 Release.

@All: Anyone can help me with my Problems 2 posts above??

[mrxa]

Where can I find "official" 1st rev.?
I downloaded few releases that suposed to be 1st rev but it seems that they are not.

I have a big issue. Whit this dvd I cant get installation to start.
System starts to reboot in Darwin bootloader just about it detects HDD.

I am currently running on Tiger 10.4.8 (JaS Release). Here is screen of dvd content so you can tell me if it is rev. 1:
http://img511.imageshack.us/img511/9937/screencv6.png

thx infront...

[xlslx]

it looks like the 10.5.1 Rev1 which is available through BiTorrent...it is official...the next release will be 10.5.2 Rev.1....Rev2 beta 1 and 2 are for internal beta testers only. but please do not ask to be one of them, we´re enough!

[allfil4]

one more willing to test rev 2

My system:

MB: EPOX EP9NA-J Nforce 4 Chipset
CPU: AMD OPTERON 165 Denmark
hd1: HItache deskstar SATA 2
hd2: MAXTOR DIAMOND MAX 9
MEMORY: ELIXIR 2*512 DUAL CHANNEL c.l. 3
V.CARD: SAPPHIRE x1950 GT

rev 1 works almost perfect, safari make crash system when downloading, final cut 6 renders realy slow 1 hour of avi standard video (700mb) take about 10 hours to render video-sound imovie does not work, so, of course i want to test rev 2 and report bugs,i'm just deperate to be a beta tester, i share that wich wit too much people

[mrxa]

xlslx:it looks like the 10.5.1 Rev1 which is available through BiTorrent...it is official...the next release will be 10.5.2 Rev.1....Rev2 beta 1 and 2 are for internal beta testers only. but please do not ask to be one of them, we´re enough!

I am not asking for being tester, i am just interested in my problem with this release.
I get error during dvd booting just around this line : " BSD Root: Disk2s3, major 14, minor". I get this error if I turn off firewire.
If the firewire is on, i get error that install need to go to secure mode or something like that.

either way, this is the point where booting stops and after 20-30 secs system restarts.
I tryed to unplug SATA hard and to use just IDE but nothing changed...

please help if You knew what is it...thx

[amitaibar]

Hi, I have AMD 3200+ With sse2. I have 10.4.8 working perfectly and i want to upgrade it to 10.5.1.
I researched a little bit and I found the there is EFI so it would be easy to upgrade.
Will it be available for AMD SSE2?
Can I upgrade my installation with the REV1 DVD?
Thanks
Amitai

[xlslx]

@ mrxa: at me the Firewire will be full-secured during boot too, and the BSD Line is ok too. It works...do a screenshot!

[mrxa]

xlslx:@ mrxa: at me the Firewire will be full-secured during boot too, and the BSD Line is ok too. It works...do a screenshot!

i get these two messages but then on a milisecond some text appears and system reboots...
i cant manage to read it...

[VyperX]

To Zephyroth:

Hello, do you think atheros wireless will work on rev 2??? can you test (or someone) if in my computer will work rev 2 because I downloaded rev 1 and i am having a kernel panic so i am not able to install it....

My computer:
My laptop is a Toshiba Satellite A215-S4767, it has 2 gb ram, AMD turion 64x2 Dual Core Mobile Technology, 250 gb HDD + 80 gb HDD (external), ATI Radeon X1200, 54g Atherols Wi-Fi (802.11b/g); 10/100 Ethernet; 4 USB, 1 FireWire, 1 VGA, 1 S-Video, 1 ExpressCard 34/54. 5-in-1 memory card reader, Realtek High Definition Audio ALC268

Will it work on my computer???

[timeflux]

Hi all,

First, thanks for all the great efforts!

I have 2 questions.

1) My system is ASUS M2N-E (north bridge: NVIDIA nForce 570 Ultra MCP), AMD X2 4800+, 2GB Patriot DDR2, eVGA 8800GT, 200GB SATA Disk. Would Zephyroth Leopard 10.5.1 AMD work on my system? If it would, do I need to make any changes in the iso, like kext injection?

2) I downloaded Leopard-AMD-10.5.1.iso which is 4,698,669,056 bytes. Is this rev1 or rev2? If it's rev1, where can I download rev2 from?

Thanks all

[xlslx]

@timeflux: This is Rev.1 which was publically (correct?) available - 10.5.1 Rev.2 not and Rev.2 is signed as Leopard-AMD-EFI-10.5.1 because EFI+GUID is avaiable in Rev2 and this works (tested on my AMD Laptop) Hope too that 10.5.2 which is now officially available will be integrated as soon as zeph has time to!

[megaargon1]

GREAT NEWS! 10.5.2 RELEASED! 341MB TOTAL SIZE, TIME FOR REV. 2

[timeflux]

xlslx:@timeflux: This is Rev.1 which was publically (correct?) available - 10.5.1 Rev.2 not and Rev.2 is signed as Leopard-AMD-EFI-10.5.1 because EFI+GUID is avaiable in Rev2 and this works (tested on my AMD Laptop) Hope too that 10.5.2 which is now officially available will be integrated as soon as zeph has time to!

@xlslx: Where can I download Leopard-AMD-EFI-10.5.1 from?

Thanks

[xlslx]

iam sorry but Rev.2 and Rev.2 Beta 2 arent available for non-beta-testers :( i cant (not allowed) to give it to you. But as the 10.5.2 is integrated into the latest 10.5.1 Zeph Edition it will be release as public version - zeph said that...

[timeflux]

xlslx:iam sorry but Rev.2 and Rev.2 Beta 2 arent available for non-beta-testers :( i cant (not allowed) to give it to you. But as the 10.5.2 is integrated into the latest 10.5.1 Zeph Edition it will be release as public version - zeph said that...

Thanks anyway. I'm trying the rev1 now, hope it works.

[megaargon1]

Wait isn't 10.5.2 being integrated into Revision 2 not into the existing Revision 1 (thus causing processing delays on public torrent sites)?

timeflux: xlslx:iam sorry but Rev.2 and Rev.2 Beta 2 arent available for non-beta-testers :( i cant (not allowed) to give it to you. But as the 10.5.2 is integrated into the latest 10.5.1 Zeph Edition it will be release as public version - zeph said that...

Thanks anyway. I'm trying the rev1 now, hope it works.

[xlslx]

10.5.((1)) Rev.1 is available, 10.5.((1 Rev.2)) is not available for non-testers. but 10.5.((2)) Rev.1 will be available for public - understood?

[braindead803]

soon enough people soon enough! : )

[mrxa]

what this forum is here for if you can help me with mine problem regarding rev. 1?
It is here for that (not only my problems of course) but i am seeing no help from "those who know solution"...

[THeKiNG]

Since 10.5.2 is out should expect 10.5.2 release?
Thanks!

[DoiX]

of course

[braindead803]

what tracker, when released, should we expect to see 10.5.2 on. TPB perhaps since zephyroth released his first edition on there and its still there. ??

[xlslx]

Youre very unpatient right? wrote the same comment in 2 different topics....let zeph do his job well done first and after that he will tell us how to obtain a copy!

[mrxa]

could ANYONE anwser my question and solve this problem??

[megaargon1]

Let's all sit back and wait. Patience indeed counts. I do agree. If you want a flawless image, WAIT is the key. :-)

[guliath]

hey guys, does anyone knows if Zeph's leopard will work with my motherboard? it's ASUS M2N-MX (it has nforce 430, and i think audio is not nvidia, AM2 socket)

thanx

[pαuℓzurrr.]

Zephyroth, do you think there still will be a release today (A) ?

[subsonic]

I hope it will be released today. In fact, i am pretty nervous about the upcoming release. It could be the first time i have a working Leopard on my main machine. =)

[xlslx]

at me the latest (for now) release works on my HP Notebook but NOT very well....hope the same too

[LohnenNicht]

Hello, I would like to sign on to be a beta tester. The first revision did not work on my system, so I want to see if this one will as my motherboard is or at least used to be fairly popular at the time of it's release.

My setup:

Motherboard: ASUS A8N32-SLi Deluxe
chipset: nForce4 SLI
CPU: Amd Athlon 64 x2 3600+ 2.0ghz
Ram: 1gb pc4200 DDR3 ram
Video: nVidia GeForce 7900 GS PCI-e x 2 (SLI)
Hard drive: 120gb 7200RPM IDE
Onboard Sound (ac97)
Marvell Yukon Ethernet (built-in)

[zamboo]

Hello all hackintosh community,
I would like to thank all of you for supporting this project, very special thanks and respects go to my hero ~Zephyroth~
It's my first time i wrote in the form, so sorry for any mistake. I gave my specifications below, rev1 DVD doesn't work for me,
I couldn't even boot with it (tried all boot combinations-x -v cpus=1 -legacy -s -f). I get stuck either at "Darwin Kernel Version 9.1.0: Fri Nov 16 14:50:43; made by ToH:xnu-1228.0.2~1/Build/obj/RELEASE_I386" or SAM Multimedia error thing.
Please any helps appraciated, I'm waiting for rev2 every second of my life. I pray and hope that my specifications will be supported by your very best work..

(~Zephyroth~ if you want I die to be a beta tester, anything I can do for you to help you get done your job.)

Motherboard: ASUS A8N32-SLi
Chipset: nForce4 SLI
CPU: Amd Athlon 64 3200+
Ram: 512 MB DDR2 ram
Video: nVidia GeForce 6800 GT PCI-e
Hard drive: 120gb 7200RPM IDE Master (0,0)
DVD: NEC DVD writer 4551A Slave (0,1)
Hard drive: 160gb 7200RPM SATA
Onboard Sound: AC97
Ethernet: Realtek RT8139 Family PCI (built-in)

[twobombs]

First of all I would like to congratulate Zephyroth & all those involved to congratulate on this tremendous great opportunity to get OSX to the masses. I was amazed how well Rev1 ran, Install, config and running OSX86 natively on my rig. If you need a dualsocket AMD Opteron betatester you know how to contact me :)
Regards.
___
Rig specs: Asus KFN5D-SLI 2x2210 Opterons, 2GbECCDDR2, 2xGF7@SLI, USB2HDD install.
http://www.asus.com.tw/products.aspx?l1=9&l2=39&l3=174&l4=0&model=1271&modelmenu=1

[megaargon1]

Hooray, the release is only a few feet away, hooray! :-<>

[mrxa]

is it gonna be released soon?
i hope it will be today beacuse I want to update to Leopard since rev. 1 doesnt work on my rig ;)

[braindead803]

we all want to mrxa. including myself. rev 1. didn't work for me so hopefully 10.5.2 rev 1 will

[mrburns05]

so im concerned now. 10.5.2 update stopped all NViject or Natit, or Titan.kexts(s) from working properly... I hope this gets resolved and we see Zeph's 10.5.2 rev1 soon

[OldSchool-c-]

Hi to all, i have tryed to install the rev 1 on my laptop (Microstar s270) but no success.....

The install process stopped with a "waiting for boot device".

I have tryed some "distribution" and all make same error....

Today i have tryed iATKOS 1.0r2 and SURPRISE !!!! It BOOT !!! The install process find the my ATI IXP chipset (i have see on the sceen with -v option, that it find my chipset with a AppleServerWorksATA ktext and not with AppleGenericPATA) and it boot fine and i have see the problem now.

The kext from all distro (zeph v1 too) not recognize propely the second ide channel (0x170 the first is 0x1f0)

The distro not work oblivusly because it is for intel not AMD but it boot !!!

In zeph rev2 is fixed this? maybe in 10.5.2?

Wait for reply.... is impossible install on my laptop for now....

Configuration:

2GB Ram
HD 250Gb
WiFi Ralink 2500
Lan Realtek 8139
Chipset ATI rs480
Video Radeon Xpress 200M

Thanks in advance

[roisoft]

The distro works in AMD if you apply a post patch from HERE (http://rapidshare.com/files/82014094/iATKOS_AMD__Test1.zip)

[OldSchool-c-]

This is for v1.0i or is ok for 1.0ir2 too ?

[roisoft]

This one is for r1 but you can apply the post pacth if you can install from r2, because the post patch is only the marvins cpuids, follow the "readme".

[OldSchool-c-]

@roisoft

Ok, i do download the r1.

The r2 stops to boot at "Jettisonig kernel linker".......

[delian7]

Ok, first of all I am so happy that apple finally released the update, so Zeph can finish his up... I am sure that we will be proud of him.

I know that my Realtek High Def Audio on chipset ALC888 will work on Zeph's 10.5.2 Rev. 1. I also know that my Lan (Realtek RTL8201N) will work on 10.5.2 Rev. 1. However I am unsure that my graphics card will work out of the box in 10.5.2. My graphics card is NVIDIA GeForce 6150SE nForce 430. I am unsure the chipset (I am still a noob.) Can someone clarify either will my graphics card work out of the box, or is there a driver for the 10.5.2 release. Thanks.

My second question is, because 10.5.2 has a bootloader will I have to install tiger, and then install leopard on top of the installation. In other words, will I have to install tiger first, and then leopard.

If you need additional specs. on my machine you can visit the following HP page:

h10025.www1.hp.com/ewfrf/wc/product?product=3440614&lc=en&cc=us&dlc=en&submit.y=7&submit.x=7&lang=en&cc=us



Thanks so much to the Zephyroth community, and Zeph himself (you rock!!)

[damniatx]

any rapidshare link for this ?, thanks....