iPC OSx86 Leopard 10.5.6 Intel AMD SSE2 SSE3

[smileyme]

I have been running Zephyroth's 10.5.2 updated over the last year to 10.5.5. I have had some issues, but nothing I couldn't fix or live with. I liked it so much, I gave my G5 to my wife and my HacIntosh became my main machine. When I tried to update to 10.5.6, it all came crashing down around my ears. I kept back-ups so nothing of value was lost. I tried to install (unsuccessfully) almost all the distros out there (including iPC 10.5.6 beta), and finally settled on Lawless 10.5.4. However, I couldn't update it, even to 10.5.5. I became acutely aware of my need for stability and bought a MacBook Pro. Today, after several tries, I installed iPC 10.5.6 final on my HacIntosh. I have been able to iron out the few glitches, and now it is more stable than it's ever been.

Again, thank you to all that worked on this, and all who contributed to the cause.

Rick :)

[Hilltan]

Is it possible to install iPC OSx86 Leopard 10.5.6 on my system, I have tried with other distributions I while a go but never succeed with them probably due to my Nforce3 chip. So to my question: will this distribution work on my system, or do I have to prepare the installation DVD with some special Kext for example VIA instead of AppleNforce.
(I have install all the updates to the DVD, five updates).

[Disengage]

Ok. So i'm downloading this now and 2 things? 1. How do I check the MD5 and 2. can someone link me to the PPF 1- 5 i need to download and a guide to patch it?

Thanks.

[cmdshft]

FINAL = Beta patched to PPF5. Just apply the new PPF in the first post to the FINAL ISO.

[Disengage]

FINAL = Beta patched to PPF5. Just apply the new PPF in the first post to the FINAL ISO.
Still not .working for me i got "still waiting for root device so i did rd=disk0s1 and got a kernel panic.

Does anyone know ANY way to get past this into the setup?

[dracea]

Intel Core 2 Duo CPU E8400 @ 3.00GHz
Northbridge: Intel® P45
Southbridge: Intel® ICH10
4 Gb DDR2 800Mhz RAM
ALC888 Audio
Realtek RTL8111B/RTL8111C LAN
NVidia 8500 GT 512Mb RAM
SATA II 120GB Western Digital

i tryed to install ... dosn`t even boot ... what seems to be the problem?

[neoxlefou]

I can install iPC or ATKOS
but when install finish, I only have 1024x768 screen resolution.

is there any video driver/patch for Geforce 9800GT to work ?

[zak]

Hi Hara Taiki, PCwiz & all, Can anybody advise on how I can work around this problem? I can install iPC but cannot boot into install,Apple NForceATA: found 0 units. I have a Presario F500 AMD Sempron. Chipset is Nvidia MCP51, nForce 410/430 MCP. I have tried many different ways but cannot boot. I can, however, install Kalyway 10.5.2 and Leo4all 4.1 and boot to desktop but I really want iPC and it's superior peripherals support and voodoo. Please help me. There must be a way to include what I need to boot.

[zak]

@dracea, Hi, your hardware looks perfect. you need to elaborate on your problem. With hardware like this you could install from a retail DVD

[BadCoder]

Thanks for everyone's hard work on this release. I'm looking now at replacing my old Leo4All install...

[InteliMacPro]

I can install iPC or ATKOS
but when install finish, I only have 1024x768 screen resolution.

is there any video driver/patch for Geforce 9800GT to work ?

Aren't there are 9800 drivers on the iPC install disc? Did you try those?

[anthonyq123]

working on intell d85pbz p4

[dracea]

@zak ... thanks ... but ... i don`t think there are ICH10 drivers ... that is my problem ... so no os x for me :|

[zak]

@dracea, I thought ICH10 was ok but maybe I got it wrong, sorry

[zak]

@dracea, Have you seen this? http://www.insanelymac.com/forum/index.php?showtopic=76404 It says,AppleAHCIPort.Kext Build 31 (ver 1.5.2) Adds ID for ICH7 to ICH10.

[xyz042]

I'm going to try again. Wish me luck.

[gabbo]

Successfull iPC 10.5.6 installation on:

AMD64 Athlon X2 5000+ @ 2.80GHz
Northbridge: NVidia Quadro NVS210S GPU
Southbridge: NVidia nForce 430B MCP
4 Gb DDR2 800Mhz RAM
C-Media 8738 Audio
Realtek RTL8139 LAN
NVidia GeForce 6600 128Mb RAM
SATA II 500GB Samsung

But I went into a lot of trouble 'till things finally worked out good:

At first, the installation failed because the audio kexts from the DVD were corrupted.
Then, I tried once again, without installing the audio kexts. Installation went fine, but I saw the mouse pointer was moving extremly slow. Somehow, I've managed to delete the nvdarwin kext. The mouse pointer was now moving, but, without the video card injector, it was useless.
I accessed the Extensions folder to check out if the disabler was there. Well, there it was. But, I also found AppleCUPThermal.kext and AppleThermal.kext. I've deleted those kexts then reinstalled nvdarwin.
And now I have a fully functional 10.5.6 on my AMD computer. Oh joy! :D

[dracea]

@zak ... it is good ... but when i boot frumos iPC dvd ... just restarts withouth any warning or error message .... i don`t know why ... i see that the drivers exist for ICH10 but ... just won`t boot

[zak]

@dracea, could be your bios settings,Execute Disable Bit or something like that, I'm not sure

[devil_bored]

Getting it now, hope my gfx kext will work with this :)

Thank you very much

[kuduku]

testing it on Inspiron 1501

[blast9999]

I installed iPC 10.5.6 on my Gateway MX8738 laptop Core Duo GMA950 using an external usb hdd. My main system is iATKOS v5i updated to 10.5.6 vanilla. I checked video, Intel SATA, Powermanagement pkg, clamshell, AppleSMBIOS Anv MacBook Pro, PS/2 keyboard fix, and everything went fine with a post install of sound patch, trackpadpane, and kext for side scroll. The big change that I noticed with this system is that itunes new smart playlist DOES NOT crash itunes. This worked with both itunes 7 and again with 8 after I did all software updates. Has anyone else noticed this problem "fixed" with iPC Leopard? Nice DVD!!!!

[dracea]

@zak ... ia have some pictures with my errors if you can help me pm and i`l send them to you

[user62756]

I have the following system and have been experimenting - not a lot of success
MB: ASUS M2NBP-VM CSM
CPU AMD 64X2 5000+
Graphics: Nvidia 8400 GS
SATA drive - Have a "version" of Leopard (10.5.2 -> 10.5.4 -> 10.5.5)
PATA drive - This is the drive I am trying to install the 10.5.6
4 GB 800 MHz RAM
PS2 Keyboard (wireless) and Mouse
Audio - Built in (AppleAzalia works well
Eth: Internal (nForceEthernetdriver works reasonably well) - Nvidia nForce 430B Gigabit
External - Ethernet-to-USB - works pretty well

Loaded base + chipset formy sata (detects it) + NVIDIA + PS2 fix + nForce + appl.
voodoo kernel + seabelt (i read AM==> voodoo + seabelt somewhere).
Mouse very slow and erratic.

Loaded base +chipset+ keyboard fix => Unable to detect KB and Mouse

I also have te problem of booting of the DVD, but I solved it by installing from the existing 10.5.5

Any way any suggestions greatly appreciated

[DEADLY360]

Hi
this is my 7th time installing iPC
i installed my driver and clicked voodoo kernal and seatbelt.kext
After installation always recieving still waiting for root device/ the cross sign on the apple logo even after inputing -f before the boot
i see some SB600 users succeed installing but how come i can't?
wat else should i do?:'(
my spec:
AMD Athlon(tm) 64 X2 3600+
ATI SB600 Chipest
3 GB RAM
40 GB IDE [windows xp]
500 GB SATA
-210 GB [MAC]
-110 GB [Vista]
-80 GB [Shared]
Geforce 8400 SE 512MB
Realtek HD Audio
Realtek RTL8101E Lan

[tacapaca]

great release.

Does this release work in vmware? if it does, can someone tell me how ?

thank you very much.

[Re1m0]

Hello!

I bought a Verbatim DVD +R DL and when i try to write the image, it gives me a write protected error:S:S:S
I tried writing the livedvd image too, but the same thing.... now o downloaded the ordinary and still. I could install the 4.3gb image to a 8gb dvd too.....

[Sietepicos]

Thank you. I will try it soon...
Sietepicos

[newbmac]

Never mind, was likely crud on the hard drive.

[newbmac]

Installed worked, but it won't startup, it just sits there after these lines display:

"MAC Framework successfully initialized
Using 3276 BUffer Headers and 3276 Cluster IO BUffer Headers"

Computer
Pentium M
Dell D600 laptop

Install Options
Voodoo Kernel
Seatbelt
APPLEIntelPIIXATA Chipset Driver

[Re1m0]

All worked until i booted up the first time and it gives me a blue screen. i guess this is because of the video drivers. how can i delete them?

[Taisto]

Boot with -x so they won`t load, and remove them normally - browse to system/library/extensions with finder.
Or boot with -s, if you can`t make any changes - write mount -uw / , browse to extension folder and remove them manually with rm command.

[Re1m0]

Now i have a new problem- when i boot leopard, it shows the video and then gives a window that before you begin please connect a keyboard. I have a ps2 keyboard and put on the ps2 fixes too but still nothing...

[Taisto]

Try this thread.

http://www.infinitemac.com/f5/ps2-keyboard-error-t2268/

If it doesnt help, look at insanelymac.com for ps2 kexts, there are about 3 different versions, one of them should work.

[Re1m0]

how do i load this kext?

[Taisto]

Well, easiest way is to use this :

http://mac.softpedia.com/get/System-Utilities/Kext-Helper.shtml

You can also copy it manually but i`d suggest you to use the app.

[Re1m0]

But if i cant start os x it gives me the window that please connect keyboard. how can i use this kext helper?

[zak]

A catch 22 situation

[Taisto]

Yeah, 22, unfortunately. Well...i`d suggest that you borrow an usb keyboard from friend for an hour, or buy the cheapest one to solve it. It`d be the easiest way. You could also try downloading the kext onto pendrive, boot into installer and try to mount it and copy the kext with the terminal, i did something like that few months ago but was copying from the hdd, not the pendrive. i`m not sure if it`d be possible.

[vladrxpx]

just curious, it says in the important notes that :
- Default kernel installed is 9.6.0 Vanilla kernel

does this mean, that if i don't check anything in the kernels menu (while installing), i'll get the 9.6.0 vanilla kernel?

[zak]

Yes, this is what "default' implies. No choice selected = vanilla... sooo yummy

[vladrxpx]

thnx,
just wanted to be sure :-d

[vladrxpx]

erm, i have yet another (probably noobish) question.

Do I need to stay disconnected while I'm setting up os X after on first boot ever, so my information doesn't get sent to apple?

Does this matter? Will everything be ok even if I leave the ethernet cable plugged in ?

i've watched a clip where one guy said it has to be unplugged... maybe he was wrong ?

[zak]

@vladrxpx.
Plugged or not makes no diff. At registration form you can press Alt or Windowz key and Q which will give you a "skip" choice. Leave Apple ID blank.

[donkypich]

thanx i will test it but how download the iso?



note by Puttabong: Please do not ask for download links at InfiniteMac!

[vladrxpx]

just type in ipc 10.5.6 on google... :/ ;)

[tacapaca]

hy all, i tried to install IPC for several days now, and no luck. every time the installation is succesful, but when i press restart, i get a kernell panic. every single time, i tried to install only the basic. i tried so many combinations, that i forgot from were i started.

Please help. what can i do ....

I have and amd 4200 x2 64 bit CPU
6GB of RAM,
ATI Radeon x1650 Graphic card
MSI K9N Neo V2 mainboard

[Artcool]

Hi,

just to make shure.... you're on AMD...are you aware that you must choose Voodoo kernel when in AMD or SSE2 systems? And in this case you must choose too Seatbelt 9.5 ...

[tacapaca]

yes, at every install i choose the 9.5 voodoo kernel, because i'am on amd. as i told you after a get the message to restart, i wait for several seconds and the i get the kernel panic. and when my pc boots, after i press the restart button on my case, sometimes it shows me only the apple logo, sometimes, the apple logo and that moving thing, and sometimes, but this is rare, it showed me a blue screen.

[sorandomitworks]

I just wanted to put a quick thanks to all. I have many computers two of which I am running osx86, the one I am referencing in this post has IPC running very well. I am using a phenom 940 3.0 GHz overclocked to 3.49 GHz all four cores are enabled. I am using a Tpower N750 Biostar motherboard with stock video. I apologize if I posted the wrong post in the wrong area. It was emphasized that I post and I didn't really know where to put this so this forum seem most logical. If you have any questions please don't hesitate to ask, I will reply in time.

[CravesBgMacs]

Hello!

I've been trying to install OSx86 for weeks now on a MS-7376 based clone with an AMD quad Phenom proc with minimul success. I'm able to boot to the DvD and complete the install with no problems but get the dreaded "waiting for root device" error when trying to boot from the HD after install. I have used the -f flag after each install completes.

I've scoured the net and several message boards and have found that the likely culprit is the chipset on the board. It's the SB600/790FX chipset.

As I said, I'm able to install without issue (have done so 100's of times trying various options) and even use the DvD as a boot disc to log into OSx. Once in, I'm able to access my Windows filesystem which is located on a seperate SATA drive. My IPC install is located on an IDE drive set as Primary Master btw.

When I boot from the disc and into the OS (rd=disk0s2) I don't have any network drivers, sound or video.

My question is basically this.

How could I install the same SATA drivers that the iso uses? it appears to load the motherboard drivers without any problems.

Thank you for any advice you can offer!

[vladrxpx]

i'm having problems with reading NTFS partitions on another hdd..
i installed macFUSE and NTFS-3G and Paragon NTFS and none of those work.

is there something i need to do first ?

[Taisto]

i'm having problems with reading NTFS partitions on another hdd..
i installed macFUSE and NTFS-3G and Paragon NTFS and none of those work.

is there something i need to do first ?

Bu what exactly happens ? Note that you shouldnt have installed both ntfs-3g and other systems cause it probably wont work. stick to one of them.

[vladrxpx]

well, i can't see NTFS with macFUSE and NTFS-3g installed, even before i couldn't read NTFS partitions..

I have osx86 installed on one hitachi HDD (installed using GUID partitioning but EFI installation says i cant install it because it's not GUID partitioned.. which is weird because i know i checked GUID partitioning while i was making new volumes for installing osx (iPC) ), and vista installed on another seagate HDD


on vista, i installed HFSexplorer, and even there it doesn't show partitions..

[dracea]

finaly i managed to boot this ... i choose my drivers ... after restart the screen goes dark gray and just remain like this .. what seems to be the problem? did i do something wrong?

[osx86ondv1010us]

I have been trying for a couple months now to install leopard on my dv1000 laptop, with no luck. I did however install XXX 10.4.11 with no problems.

Specs :
Intel Celeron M (sse2)
Intel 855 chipset
IDE Hard Drive
1.5 gb of ram
Standard network and sound drivers.

I keep getting kernel panics and immediate reboots, even with assorted flags. -V, -X, both dont offer any help at telling me what the problem is.

Ive tried multiple versions, iatkos, ideneb, and now XXX_10.5.6_Final, and still nothing. Ive tried every combination that i could think of.

Someone please point me in the right direction. Is it possible to install leopard with a sse2 processor and the intell 855 chipset?

[blast9999]

Did you try the voodoo kernel?

[blast9999]

Hi, can anybody tell me which video driver I should choose on iPC 10.5.6 for my EVGA 7300GT 256MB DDR2. I didn't choose any video, and now it has no QE/CI and only show 1024x768 res with no other options.

[lateralusman]

Hi, can anybody tell me which video driver I should choose on iPC 10.5.6 for my EVGA 7300GT 256MB DDR2. I didn't choose any video, and now it has no QE/CI and only show 1024x768 res with no other options.

Try the 9f23installer here: http://scottdangel.com/blog/?p=56
Or you could go back and install osx again and choose the video kext for your card.

[blast9999]

Thanks, that's a nice option as the DVD won't let you do a post install of a driver. I plan to try two different video cards. Seems like the best way would be to use EFI Studio and then uninstall and reinstall.

[fcollingwood]

I currently have Kallyway 10.5.2 installed, had to slipstream the SB600 kext on to the DVD, but it works. Perfectly.

I tried installing iPC, and it failed. Miserably.

It seems Chameleon is the problem. It doesn't like MSI K9A2 CF board with the custom AHCI BIOS and AHCI enabled.

Turn AHCI off, and it sorta works. On installation, it gets as far as a grey screen, and spins the beach ball.

I'm willing to try to help the Chameleon and iPC teams fix this release by supplying whatever info regarding the install that they require - Ask away.

[blast9999]

I have the problem of not being able to connect to itunes sharing on my network, as well as ichat using bonjour. I didn't use any ethernet drivers when installing iPC, and have internet working fine plugging it into my router, as well as sharing files between computers. Also my TM gives the ethernet error. Is there a fix on the dvd for this problem? I'm using a Gigabyte P35-DS4 with its Realtek 8111B ethernet.
I reinstalled now using the R1000 psystar driver for ethernet and everything now works. I did try the NVinject driver for my video card but it didn't enable QE/CI. I had to reinstall without video drivers, and run efi studio, which did the trick. Also, now my TM seems to be working normally.

[dyrer]

I received Kernel Panic during loading the installer
CPU 0 caller 0x002D950D nfs_boot_init failed with 6\n"@/VoodooKernel/xnu-1228.7.58/bsd/nfs/nfs_vfsops.c:851

I have iPC 10.5.6 patched with ppf1+ppf2
I have
AMD X2 4600
ASUS A8N-SLI
2 GB Memory
An IDE DVD-ROM with a SATA 250 GB hard drive
Wireless Logitech keyboard and mouse

[Iteza]

I'm having the same exact error, DVD just boots and displays a kernel panic instantly. I never got to the installer.

Here is a picture of the kernel panic:

http://www.pixelz.fr/c/3/a/fd07469de8cf12a37ebd1439b7491.jpg

However, I have a bit outdated 10.5.2 DVD that works fine but wanted to try that one ;)

- AMD Athlon 64 X2 3800+
- Seagate SATA ST3360832AS 360 Gb
- 2GB DDRAM
- Geforce 9600GT
- AC97 soundcard
- nForce 4 motherboard from MSI

[blast9999]

Looks like it doesnt like the voodoo kernel. Try booting with -x and see what happens. The older dvd probably uses the toh kernel. I don't know if this dvd includes choices for boot kernels, but other distros do. That way you could try booting with toh and see if it works.

[nunrg2009]

mkay.. so I have tried to install 3 iPC disks that I have "acquired"... I get an error at the very end of the install either saying that the install disk is corrupted or that my hard drive cannot be set as the startup disk and that I should do it manually, though it wont let me. I'm using a PATA disk with a SATA converter. iPC wont detect the PATA disk on its own. I'm currently running leo4all v3. Works like a dream but it is only 10.5.2 and some new software I want to run is 10.5.5 and up. Are newer versions of OS X not PATA HD compatable? My PATA DVD burner was detected just fine. I have a genuine SATA HD but it is running my leo4all and I am unwilling to start from scratch again cuz I've tried a few times with no success.

My Hardware:
Gigabyte GA-965P-S3 (Intel ich8)
Pentium 4e 3.01ghz 800mhz FSB
400gb SATA HD (startup disk)
100gb PATA HD
PATA DVD DL Burner
SATA DVD DL Burner
Nvidia 8600GT

[blast9999]

Can you try the PATA hd in a usb external case? I've installed onto a PATA hdd in my old laptop ok, must be the controller on your mobo. External usb drives should be ok, as I've installed a few times onto them ok.

[nunrg2009]

Can you try the PATA hd in a usb external case? I've installed onto a PATA hdd in my old laptop ok, must be the controller on your mobo. External usb drives should be ok, as I've installed a few times onto them ok.
I'll try that but I had leo4all on the same drive for a while before I gave up windows for good and it worked fine

[artstudio]

Pleas can you tell me the procedure to install iPC_OSx86_10.5.6.iso on Your P5Q MoBo.
I have P5Q-E with Blue Ray Pioneer BD 202, 4 HDD WD Raptor, 4 GB of memory. I have tried to instal iPC_OSx86_10.5.6.iso but after a few second of boot action system goes to restart. I think I is because of iPC_OSx86_10.5.6.iso have nor kext file for P45 chip set or Bacause of my Blue Ray DVD (SATA) I am not shore.:'(

[nunrg2009]

Just wondering if anyone else has had this problem...
Install gets all the way to the end and then says the install failed because my hard drive can't be mounted as startup disk. Then I go to utilities/ startup and choose the disk, reboot and it works. So far its just annoying but I was just curious if this was a common problem

[vladrxpx]

The iPC is osx86 installation.

Does this mean it is 32bit operating system of osX or it could be 64bit if you have that kind of processor ?

does the bit type install itself based on the processor you have ?

[Ali C.]

OSx86 is a tagname, really. Most of the distros, including iPC (as far as I can tell) support 64-bit mode if your processor is capable and you can get a kernel that supports it.

[jakepina]

I need to install IPC OSX86 Leopard 10.5.6 on TC4400 Tablet, could this be possible? Do you know where can i find the instructions on how can I do this? I would appreciate any help...

Thanks

[maxrock]

Could anyone plz tell me how to install iPC OSx86 Leopard 10.5.6 on my "old" system.
Intel 845GV chipset
Intel P4 2.8 GHz processor
512 DDR RAM

[Plx]

Has anyone had any luck with nForce video? Everything else I've tested seems to be working OK except window redrawing. Whenever I move a window the contents remain still while the frame ghosts (see pic (http://i576.photobucket.com/albums/ss204/Plx/IMGP1708.jpg)). I have tried lots of different drivers (lost count of number of installs done ^_^ ), including no drivers, and I know the 6100 integrated graphics are not supported (I can live with 1024x768), but I am stumped. I had graphics going OK with Leo4AllV5, so I'm not sure what I'm missing. Ironically installer DVD windows work fine. TIA

Much appreciate all the work that has gone into these distros, amazing!

[zak]

Hi PLx, I have used the nvidia kext package from leo4allv4.1 with this gfx. Try it...

http://www.mediafire.com/file/mmjvdnay2bn/NVidia-Kexts.pkg.zip

[parachute]

Is it possible to install iPC OSx86 Leopard 10.5.6 on my system, I have tried with other distributions I while a go but never succeed with them probably due to my Nforce3 chip. So to my question: will this distribution work on my system, or do I have to prepare the installation DVD with some special Kext for example VIA instead of AppleNforce.
(I have install all the updates to the DVD, five updates).

Just registered to reply you. I guess it's a little late, but still... See my post here:
http://www.insanelymac.com/forum/index.php?s=&showtopic=142502&view=findpost&p=1133737

Hello to InfiniteMac BTW.

[sandin]

Hi everyone. I'm new leopard user, I tested it and I must say I like it very very much, I've never seen more "user friendly" system than this one, and I've tested many operating systems (Win from 3.x to W7, many linux distros, ReactOS, etc..). I like leopard so much, the only thing that's forcing me to stick with my current os (winXP) is my Leadtek WinFast 2000XP TV/FM Card, Leopard doesn't support it :/
...or maybe I'm wrong, is there a way to run my WinFast 2000XP card on Leopard?

besides this, I have two major issues:
first one: in 1 out of 5 system boots I don't get my mouse USB support, my mouse doesn't react, then I just reset and it works (btw, is there a shortcut for calling "apple" button, like there is "win" key for calling "start" button?). Why is this happening with my mouse?

other one: Once I reboot, or shutdown PC, next time it starts booting, and pass the BIOS's HDDs gathering, I get second boot, like my BIOS check RAM, finds out which HDD/CD/DVD drives I have, and then it should pop up chameleon boot program, but it doesn't it reboots itself, does BIOS ram check, check HDD/DvD/CD connected, and then it works normal, load chameleon, etc...

my hardware:
Athlon X2 64 4200 [email protected] (FSB@219)
MSI Motherboard (nForce 520 chipset)
Gainward nVidia GeForce8600GT
Maxtor HDD 80GB (ATA)
Pioneer DVD 212 (not sure if 212), (ATA) ;HDD and DVD are connected to 1 IDE Cabel, HDD is master)
Creative Audigy 1 sound card (working, but without input support, is there a fix for this so I can use my MIC as well?)
Leadtek WinFast 2000XP TV/FM

[madder69]

hi all

first post here so hope i'm not too demanding... :)

nb specs listed below.

btw im trying to vmware workstation 6.5 the mac.
i've tried numerous settings in vmware from various guides around the net with no real joy so im sure its not that?

Ive tried Kalyway 10.5.2, JaS 10.5.4 and now iPC 10.5.6 PPF5 build which gets the farthest from what i can see.

i just cannot get very far, iPC gets me to the apple logo screen with a spinning timer that freezes after 10 mins.

the panic i get states: bsd process name corresponding to current thread: coreraidserver

just tried it again and got udf.util this time...

thanks in advance

andy

NB SPECS:
GeneralPlatform TechnologyIntel Centrino 2System TypeNotebookBuilt-in DevicesStereo speakers, subwoofer, wireless LAN aerial, Bluetooth aerialEmbedded SecurityFingerprint readerWidth44.1 cmDepth30 cmHeight4.4 cmWeight4.1 kgLocalisationUnited KingdomProcessorProcessorIntel Core 2 Duo T9400 / 2.53 GHzMulti-Core TechnologyDual-Core64-bit ComputingYesData Bus Speed1066 MHzChipset TypeMobile Intel PM45 ExpressCache MemoryTypeL2 CacheInstalled Size6 MBRAMInstalled Size4 GB / 4 GB (max)TechnologyDDR2 SDRAMForm FactorSO DIMM 200-pinConfiguration Features2 x 2 GBStorage ControllerTypeSerial ATASerial ATA InterfaceSerial ATA-150StorageHard Drive320 GB - Serial ATA-150 - 7200 rpmHard Drive (2nd)320 GB - Serial ATA-150 - 7200 rpmOptical StorageTypeDVD±RW (±R DL) / DVD-RAM / BD-ROM - integratedCard ReaderType6 in 1 card readerSupported Flash Memory CardsSD Memory Card, Memory Stick, Memory Stick PRO, MultiMediaCard, xD-Picture Card, MMCplusDisplayDisplay Type18.4" TFTMax Resolution1920 x 1080 ( WUXGA )Widescreen DisplayYesColour support24-bit (16.7 million colours)FeaturesDual lamp, CineCrystal, 90% colour gamutVideoGraphics Processor / VendorNVIDIA GeForce 9700M GT TurboCache supporting 2303MBVideo MemoryGDDR3 SDRAM - 512 MBMax Allocated RAM Size1791 MBMultimedia FunctionalityTV Tuner TypeDigital and analogue TVDigital TV ReceptionDVB-TAudioAudio OutputSound cardCompliant StandardsDolby Digital Live, Dolby Pro Logic IIx, High Definition Audio, Dolby Home TheaterAudio InputStereo microphoneNotebook CameraCamera TypeIntegratedSensor Resolution1 MegapixelCapture Resolutions640 x 480Input Device(s)TypeKeyboard, touchpad, 4-way scroll button, CineDashFeaturesBuilt-in numeric keyboardTelecomModemFax / modemMax Transfer Rate56 KbpsProtocols & SpecificationsITU V.92FeaturesWake on RingNetworkingNetworkingNetwork adapterWireless LAN SupportedYesData Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft), Bluetooth 2.0 EDRFeaturesAcer SignalUpCompliant StandardsIEEE 802.11b, IEEE 802.11a, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n (draft), Bluetooth 2.0Expansion / ConnectivityExpansion Slots Total (Free)2 ( 0 ) x memory - SO DIMM 200-pin ¦ 1 ( 1 ) x ExpressCard/54Interfaces4 x Hi-Speed USB - 4 PIN USB Type A ¦ 1 x display / video - HDMI - 19 pin HDMI Type A ¦ 1 x remote control - infrared ¦ 1 x display / video - VGA - 15 pin HD D-Sub (HD-15) ¦ 1 x audio - SPDIF output/headphones/line-out - mini-phone stereo 3.5 mm ¦ 1 x microphone - input - mini-phone 3.5mm ¦ 1 x audio - line-In - mini-phone 3.5mm ¦ 1 x modem - phone line - RJ-11 ¦ 1 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 1 x TV antenna - inputMiscellaneousIncluded AccessoriesRemote controlFeaturesSecurity lock slot (cable lock sold separately), administrator password, system password, hard drive password, wake on LANCompliant StandardsACPI 3.0

[mylabownsme84]

Ok after searching the web for the last few hours and playing around with different settings i am stumped. i am using ipc 10.5.6 final and got it to work on my toshiba tablet. I am trying to make it work on a amd system but am having no luck. i can get to the darwin boot loader and start using -v flag but i get hung up at extension "com.apple.driver.itunesphonedriver" has no explicit kernal dependency; using version 6.0 and then i get the never ending still waiting for root device.

my hardware is:
Compaq SR1560NX
amd athlon 64 3500+
2gb ram
250gb SATA 2.5" HDD
lightscribe dvdrw/cdrw

if it helps any the hdd is set as master 3 and the dvd is set as slave 2.

[toaoGEO]

Hy,

I have an "iPC_OSx86_10_5_6_Universal_PPF5_Final".
I burnt it on a DVD-R with nero9 at 4x.
Created a partition with "diskpart" using the comand series:
create partition primary id=af
active

Then I've rebooted from the freshly burned DVD-R.
I hit F8 and typed -x, the hit Enter.
It displays some command lines then it halts on "Still waiting for root device".
These are the last ones:

standard timeslicing quantum is 10000 us
vm_page_bootstrap: 771836 free pages and 14596 wired pages
nig_table_max_displ = 79
AMD: disabling C1 clock ramping (node 0)
Local APIC version not 0x14 as expected
ACPI CA 20051117 [debug level=0 ;ayer=0]
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Disabled
AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Disabled
Loading security extension com.apple.security.TMSafetyNet
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatvelt Policy (mb)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All right reserved.

Mac Framework successfully initialized
using 15728 buffer headers and 4096 cluster IO buffer headers
[TCS] original delta: -523602, new delta: 59. (CPU1)
IOAPIC: Version 0x11 Vectors 0:23
ACPI: System State [S0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIThermal" has no explicit kernel dependency: using version 6.0.
nbinit: done
Security auditing service present
BSM auditing present
From path: "uuid"
Waiting for boot volume with UUID 86EED391-097F-3633-BA4A-185A5D9AF487
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourcesMatch</key><string ID="2">bcot-uuid-media</string></dict>
AppleNForceATA: found 1 units
IOATAController device bloking bus
FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 00118666455561a5; max speed s400.
AppleNForceATA: warning: phy connection failed. status=0xe7229f83
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: found 2 units
AppleNForceATA: NVIDIA nForce MCP 65 Serial ATA by MeDevil (CMD 0x9f0, CTR 0xbf0, IRQ 23, BM 0xd800)
USBF: 1.264 AppleUSBOHCI[0x4ec4800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.319 AppleUSBOHCI[0x4ed7800]::CheckSleepCapability - controller will be unloaded across sleep
AppleNforceATA: NVIDIA nForce MCP 65 by MeDevil (CMD 0x1f0, CTR 0x3f4, IRQ 14, BN 0xec00)
AppleNForceATA: found 0 units
AppleNForceATA: found 0 units
Still waiting for root device
Still waiting for root device...



Am I missing something?
Is there anything I can do to make this hackintosh OS work on my PC?


My specs:
CPU: AMD X2 4800+, suporting SSE2 and SSE3
MB: Abit AN52V
Chipset: nForce520(MCP65S)
RAM: 3GB DDRII 800Mhz
GPU: Ati Radeon HD3850
HDD: Seagate 1000GB SATAII
DVD-RW: LG IDE (NOT SATA)
LAN: Realtek RTL8168/8111(On-Board)
Sound: Realtek Hi-Definition audion(On-Board)

[Computer Age]

I'm downloading the iPC Public Beta (Leopard 10.5.6), but I'm not installing it as a OS, I'm installing it on VMWare Workstation. Is it possible for somebody to tell me what to do for the install? All I want is 10.5.6 to work and preferably networking. I don't care about audio. Once I get it working, I'm installing the iPhone SDK 2.21 (can't wait!).

My specs go as follows:

Intel Core 2 Duo P7350 (2.00GHz)
NVIDIA GeForce 9200M GS
Windows Vista Home Premium x32 as host
VMWare Workstation 6.5

My VM is setup as:
-25 GB IDE drive
-Guest OS is FreeBSD 64-bit (I had it like that for 10.5.2, but I needed 10.5.3 and I couldn't get it so I'm using 10.5.6)
-1 Processor
-No Networking (To keep it from registering)

Please help as soon as possible!

Thanks everyone,
Computer Age:)

[Computer Age]

Hy,

I have an "iPC_OSx86_10_5_6_Universal_PPF5_Final".
I burnt it on a DVD-R with nero9 at 4x.
Created a partition with "diskpart" using the comand series:
create partition primary id=af
active

Then I've rebooted from the freshly burned DVD-R.
I hit F8 and typed -x, the hit Enter.
It displays some command lines then it halts on "Still waiting for root device".
These are the last ones:

standard timeslicing quantum is 10000 us
vm_page_bootstrap: 771836 free pages and 14596 wired pages
nig_table_max_displ = 79
AMD: disabling C1 clock ramping (node 0)
Local APIC version not 0x14 as expected
ACPI CA 20051117 [debug level=0 ;ayer=0]
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Disabled
AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Disabled
Loading security extension com.apple.security.TMSafetyNet
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatvelt Policy (mb)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All right reserved.

Mac Framework successfully initialized
using 15728 buffer headers and 4096 cluster IO buffer headers
[TCS] original delta: -523602, new delta: 59. (CPU1)
IOAPIC: Version 0x11 Vectors 0:23
ACPI: System State [S0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIThermal" has no explicit kernel dependency: using version 6.0.
nbinit: done
Security auditing service present
BSM auditing present
From path: "uuid"
Waiting for boot volume with UUID 86EED391-097F-3633-BA4A-185A5D9AF487
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourcesMatch</key><string ID="2">bcot-uuid-media</string></dict>
AppleNForceATA: found 1 units
IOATAController device bloking bus
FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 00118666455561a5; max speed s400.
AppleNForceATA: warning: phy connection failed. status=0xe7229f83
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: found 2 units
AppleNForceATA: NVIDIA nForce MCP 65 Serial ATA by MeDevil (CMD 0x9f0, CTR 0xbf0, IRQ 23, BM 0xd800)
USBF: 1.264 AppleUSBOHCI[0x4ec4800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.319 AppleUSBOHCI[0x4ed7800]::CheckSleepCapability - controller will be unloaded across sleep
AppleNforceATA: NVIDIA nForce MCP 65 by MeDevil (CMD 0x1f0, CTR 0x3f4, IRQ 14, BN 0xec00)
AppleNForceATA: found 0 units
AppleNForceATA: found 0 units
Still waiting for root device
Still waiting for root device...



Am I missing something?
Is there anything I can do to make this hackintosh OS work on my PC?


My specs:
CPU: AMD X2 4800+, suporting SSE2 and SSE3
MB: Abit AN52V
Chipset: nForce520(MCP65S)
RAM: 3GB DDRII 800Mhz
GPU: Ati Radeon HD3850
HDD: Seagate 1000GB SATAII
DVD-RW: LG IDE (NOT SATA)
LAN: Realtek RTL8168/8111(On-Board)
Sound: Realtek Hi-Definition audion(On-Board)

Did you apply the PPF previously mentioned for nForce chipsets? In the commands, it shows that there are 0 nForce Chipsets.

Good luck,
CA

[macintoshiba]

Hi, and thanks to pcwiz, Hara Taiki, and all those who are putting up with us noobs AND slaving putting together this great disk. I really appreciate the work involved.

Dual boot using a USB drive for MacOS, Vista on mothership.

Without selecting any kernel (should default to Vanilla 9.6.0, right?), I can install. However, it NEVER boots, I just get the spinning wheel on the Apple screen, and then a reboot. Even on verbose, the reboot happens so quickly, I can't read anything critical on the crash info to tell you. Can anyone tell me why and how I might work around it?

I can get some things working with Voodoo 9.5.0 Kernel.

Best so far with Universal 9.4.0. Burned iMovies using iDVD!

Can get wireless to work (intermittently):-/. No firewire (why not?):'(. Had Tablet working with TabletMagic...but that broke at some point (and I don't know where!) :-/Oh, and no internal sound whatsoever at any point. HOWEVER, I have a USB audio card that works fine!^_^

[macintoshiba]

Hi, and thanks again.

I am using the iPC OSx86 10.5.6 Final disk

I have my mac-in-stein working again, as well as I ever did. Right now, I have...

9.5.0 Voodoo Kernel
Intel GMA 950...WORKS DECENTLY (some artifacts...no rotation)
Intel ICHx SATA Drivers...works
Legacy AppleHDA:Sigmatel 9200...does not show in "Sound"
Voodoo Power power management...WORKS DECENTLY (no battery display)
Dual boot time sync by Zephyroth (thank goodness)
IOPCMCIA Family...seems to see card, but do not have driver
Seatbelt.kext 10.5.5 (I wish I could use Vanilla kernel!)
PS/2 Keyboard Patch (works)
I then used ToshACPI.kext to activate bluetooth. Haven't tested, but appears to work.
I set up TabletMagic, installed TabletPC driver, and it came up with an error (a kext was not installed correctly). I used kext helper b7, reinstalled JUST the errant kext, and my tablet works!:-d

OK, so now I am in business, for the most part. I want to use Vanilla, but it seems it ain't happening. Why not? I have Intel parts (in fact, most of the Toshiba is like a MacBook).

Also, there is a Texas Instruments PCIxx12 device in my computer that has a OHCI controller, the 5-in-1 Card reader, and the FIREWIRE port! Anyone know what driver to use for this this?!?

[scowl]

I'm actually kind of surprised installation went so smoothly. Had to enter in my resolution (1680x1050x32) during boot up but that's okay. Now on to some issues. When I move windows arounds, it'll start ghosting until I click on the bottom and resize it. Now, I'm going to have to be putting in my old Gigabyte X800XL soon, so I'm going to need to reinstall OSX I'm guessing. What option would you suggest I use because I had taken a peek at the ATI info in the install and I didn't see anything relating to my X800 XL.

[macintoshiba]

I would not try this with unsupported video cards. If you see a driver, you can install it later by looking for the correct folder on the DVD, instead of reinstalling the whole thing. You listed no info about your setup...CPU, chipset, graphics card...

[scowl]

Ahh sorry about the no info. My motherboard is an MSI K8N Neo4, processor is an AMD 64 x2 5500+ and my graphics card is the Gigabyte Radeon X800 XL. I did reinstall OSX with the Radeon in it and it has been working just fine. Even got my Microsoft Lifecam VX-6000 working surprisingly. My only issue is that my monitor is stuck on a 1400x1050 resolution instead of the native 1680x1050 and it's buggin' the crap out of me. What steps can I take to remedy this?

[minsk]

what bios are you guys using...im using 3.8 and it jsut spins on the apple ...cant even get to install :( any help is appreciated

[macintoshiba]

One of the issues I had early on was badly burnt disks! Seriously, never thought it would be a problem, but I RESOLVED your issue (that I was having) simply by re-burning my image at 1x speed (after I checked to make sure my image passed the checksum)...

Bios v. 3.8, btw

[minsk]

seems to be installing....really sould like to do vanilla to...and maybe iATKAOS v7

[minsk]

does any one know what wireless card will work in the m400.....i put an atheros on my x60 it roccks

[minsk]

I'm actually kind of surprised installation went so smoothly. Had to enter in my resolution (1680x1050x32) during boot up but that's okay. Now on to some issues. When I move windows arounds, it'll start ghosting until I click on the bottom and resize it. Now, I'm going to have to be putting in my old Gigabyte X800XL soon, so I'm going to need to reinstall OSX I'm guessing. What option would you suggest I use because I had taken a peek at the ATI info in the install and I didn't see anything relating to my X800 XL.



how do you enter screen rez at start up?

[minsk]

hey guys have a toshiba m400
installed ipc osx86 final.
everyitng went smimmingly.
however when i it rebooted..i ony get multi colored vertical lines..it donet go int o registration..
any help would be appreciated.

[E.C.H.O]

i already have Kalyway 10.5.2 installed, when i update it to 10.5.6 or 10.5.7, my sound wont work(basically the kxaudio kext would stop)..so should i install this and try>??

[toaoGEO]

Hello,
So sorry for not writing for so long, I was very busy the last few months so I put my Hackintosh project on stand by. Anyways, now I'm back on it so ... let me fill you up on it.

I made some progress from the stage described here:
http://www.infinitemac.com/f36/ipc-osx86-leopard-10-5-6-intel-amd-t1792/page29.html

I manage to boot up from the DVD disk by using an LG SATA DVD RAM (HL-DT-ST DVDRAM GH20NS15 more exactly).
Then I select the hard drive I want to install on, I select the packages I thing I need and START THE INSTALLATION.
It seems to star well, it says it takes 8 minutes, then 16 ... but, after the progress reaches 25-30% it jumps to 65-70% and gives me the ERROR: "Installation cannot be completed, the media your trying to install from is BROKEN!"

Did anyone have this kind of problems?
Do you have any suggestions?

I've checked the MD5 hash of my image and it is 9ceb2e8daaa182a1071a337ad9b81e3f as it should.
And I burned it on an Estelle DVD-R 8x blank, with Nero Express of Nero 7 Premium package at 6x twice and the same thing.

Should I try a better quality DVD-R (like Verbatim maybe)?
Should I try a slower burn speed?
Should I try a different burning software?

Please help,
I really wanna make this happen! :)

[delian7]

i had to reinstall ipc 10.5.6, and now my cd rom and card reader aren't working... is it the kernel's fault, as i am using chameleon v2?

[kbaltodano]

Hi there. I can’t boot with live cd neither with normal setup. I get the errors “Still waiting for root device”, or “AppleNforceATA sata phy reset” or something like that, or “AppleNforceATA found 0″.
Since I’m trying with the DL version I guess I don’t have to download the iPC OSx86 Final 10.5.6 V1.1 PPF (nForce) patch, it’s supposed to be included in the ISO isn’t it?
I guess my error have to do with not being able to turn on AHCI on at the BIOS. I have a Nvidia MCP61 chipset inside a Dell Inspiron 531s system. Is it a way that I can ignore that or something like that?

[spiderwick]

Here is my configuration:

BIOS version 2.2
mobo : MSI with intel G31 chipset
CPU : Intel dual core 2.2 GHz
Ram : 1GB RAM 800mhz
DVD : SATA DVD
H-dick : 40 gbs IDE
onboard VGA:
VGA 256 ( Built_in )

i installed Mac OSX86 leopard 10.5.6 Universal_PPF2 on my pc but i have a problems.
i have sucessfully installed it on my pc
Restart .... boot with cpus=1 -v -f
And then my computer is not working .... like a hang
How can i do?
please reply me ... quickly
thanks

[ready to Mac]

i don't know if this is the right place, but I'm fed up with vista and xp, can someone please help me, I'm interested in installing mac, i downloaded 3 versions (ipc10.5.6+ leo4all 10.5.2+ IDeneb v1.4) and burn them on DVD's but i'm not getting an installer from any
My specs are
AMD Sempron Processor 2800+
Socket AM2 (940)
1 gig ram
250 gig HD

[ready to Mac]

please someone help me with Mac

[ready to Mac]

i need steps to install from scratch, Amd sempron 2800-1 gig ram-250 gig Hd

[delian7]

are you getting the darwin bootloader? (press any key to boot from DVD)

if not you need to either:
go into your bios and configure to boot by default from the CD if inserted,
or if your computer has it, go to the bootmenu and boot from your CD.. i use ESC at my HP blue screen..

[spiderwick]

how can i change 64 bits to 32 bits?
please say commend
may i know?

[TimSpaans]

How can i add this to my dvd?

[classic]

what kernel do i choose for amd x2 6000+ voodoo or mach kernel? instructions from people with sb600 chipset would be nice...

[classic]

ok ignore the above after hanging around a little in the irc i got a little wiser now :D

[saga_bharat06]

AMD Phenom 2.3 Ghz Triple Core
3 GB Ram
Vmware 7
500 GB sata

Thanks for DVD

[holake]

Dear All friends,
I'm using
Dell Precision 360
CPU 2.8Gh
RAM 1GB
VGA nVidia Gforce FX 5500
OS Windows 7
dual boot it's ok

then i have fully succeed with iPC OSx86 10.5.6
and after i restart my computer i can see boot screen (white screen with apple logo) about 1 seconds then reboot itself

Please somebody give me in detail how to do.

Thanks before hand!
[email protected]

[holake]

Dear All friends,
I'm using
Dell Precision 360
CPU 2.8Gh
RAM 1GB
VGA nVidia Gforce FX 5500
OS Windows 7
dual boot it's ok

then i have fully install succeed with iPC OSx86 10.5.6
and after i restart my computer i can see boot screen (white screen with apple logo) about 1 seconds then reboot itself

Please somebody give me in detail how to do.

Thanks before hand!
[email protected]

[holake]

Dear all friend,

i am using
Dell Precision 360
Intel Pentium 4 CPU 2.8
RAM 1 GB
VGA nvidia gforce fx5500
Sound on board
NIC on board
Hard disk IDE 80gb
OS windows 7
dual boot is ok

then i have installing iPC OSX86 10.5.6 succeed!
after i restart my computer i can see only the white screen with apple logo about 1 second then reboot itself

Please anybody give me in detail how to do.

thanks before hand
[email protected]

[victor.ursan]

hi , I have installed : iPC OSX86 10.5.6 successfully, it work all but i can't make the network to work .
I have a : Toshiba l305-s5885
the wireless is an : Intel PRO/Wireless 3945ABG
more details you can find here : http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/satellite_L305-S5883.pdf
I installed the drivers that i thought it should work , but it doesn't recognize the port or the wireless .
Any help please ?

[00010]

That particular card is unsupported in OSx86.

Sorry.

[Pitch_Black]

So i try to install ipc OSx86 ppf5 universal final on Amd phenom 2

it stays on the apple screen and after a while appears a Trouble sign above the apple. I'm on a (laptop) hp pavilion dv6 amd phenom 2 supports sse1, sse 2, sse 3, sse 4a so thats no prob. I can't change my bios because there are only a few options and its the latest version. Please help me, you can send me a pm to. Thanks in advance.

So i tried to install it with option F8 -v -f. and -v but no luck, i see one important messag between al the info saying: upgrade bootloader and then more info and it hangs. I tri with -v rd=disk5s2 then i get the same + at the bottom: still waiting for root device and that up to 3 times then i decided to quit and reboot. So can you help me? How do i upgrade the bootloader and put in the .iso?

You can check my specs in the attachment, ok attachment is to big. See this for de txt file for specs 82.9 kb http://www.mediafire.com/?hynll7rrotrrxe7

-Edit-
So i try with platform=x86pc Still nothing
I try with -x Still nothing
I try with -f i get a kernel panic.

How do i update de bootloader to 2.1? I think my system is to advanced or something, i don't know :-p Anyway i have to update it but where can i find the bootloader in de iso? Or is there a version with an updated bootloader?
Please respond fast..
Thnx.

[Pitch_Black]

Does anybody has a answer? So much views but nobody know's, com'on that can't be?