Trouble install 10.5 on X38 chipset

[zamdam]

I have the maximus formula motherboard and a Q9550, 4gb ocz reaper, HD4870, IDE dvd writers, and sata hard drives. I cant seem to install OS X, no matter what I try.

Im kinda new to this. I used iAtkos on my old hardware and also installed it in XP using the flat-img.

Has anyone installed it on my motherboard or knows how? What should I set the bios options to? Is there a modified bios I could use to flash my bios?

Thanks

I put this in my sig, but for some reason its not showing up..

ASUS Maximus Formula
Q9550 @ 3.6ghz
4GB OCZ Reaper 1158mhz
Sapphire HD4870
5 WD Sata hard drives
2 IDE DVD, Sony/LG
Antec P180
Antec Tru Power 650
Zalman 9700 led

[zamdam]

Bump, can anyone help?

[zamdam]

Did I post this in the wrong section?

[andyvand]

I have the maximus formula motherboard and a Q9550, 4gb ocz reaper, HD4870, IDE dvd writers, and sata hard drives. I cant seem to install OS X, no matter what I try.

Im kinda new to this. I used iAtkos on my old hardware and also installed it in XP using the flat-img.

Has anyone installed it on my motherboard or knows how? What should I set the bios options to? Is there a modified bios I could use to flash my bios?

Thanks

I put this in my sig, but for some reason its not showing up..

ASUS Maximus Formula
Q9550 @ 3.6ghz
4GB OCZ Reaper 1158mhz
Sapphire HD4870
5 WD Sata hard drives
2 IDE DVD, Sony/LG
Antec P180
Antec Tru Power 650
Zalman 9700 led
What precisely is the problem for installing?
Also could you post your HD controllers?

[zamdam]

Name a HD controller and I will be able to tell you if thats the right one.. I know that the ide controller is a jmicron, as for the sata controller, I cant think right now..

But here is what happens when I try to boot the iAtkos 5i DVD

http://i113.photobucket.com/albums/n240/frhrnicko/Picture051.jpg

http://i113.photobucket.com/albums/n240/frhrnicko/Picture048.jpg

[zamdam]

Im guessing its a ICH9R controller, but here is all the specs for my mb

http://usa.asus.com/products.aspx?modelmenu=2&model=1889&l1=3&l2=11&l3=572&l4=0

[andyvand]

Im guessing its a ICH9R controller, but here is all the specs for my mb

http://usa.asus.com/products.aspx?modelmenu=2&model=1889&l1=3&l2=11&l3=572&l4=0
Yes it is an ICH9R controller but this problem does not seem to be related to the controller itself...
Does the MD5 checksum match properly (in other words, is it correct)?
I think you have got a faulty OS X install DVD...
I would recommend XXX 10.5.6 over iAtkos 5i also...

[zamdam]

"XXX 10.5.6" Is that the leo install?

I havent tried the md5 yet

[andyvand]

"XXX 10.5.6" Is that the leo install?

I havent tried the md5 yet
Yes, get the latest...

[zamdam]

whats the best program to use to check the md5?

Thanks for your help so far.

[zamdam]

I found one called md5.exe and it asks for you to select the file you would like to check and enter the checksum to see if it matches.

[zamdam]

I will check it when I get home from work, but what if it checks out to be good.., Then what do you think the problem could be?

[zamdam]

Okay, i got it to boot and install, but since i have the hd 4970 video card, which drivers do i select from the list.. the highest it goes is 3870?

[zamdam]

I chose the 3870 cause i didnt know any better and when it restarted it said " i need to hold the power button down to restart it, so .. . Im gonna try and reinstall it with out selecting any video drivers..

Another thing, what do i need to select once i get to the customize section of the installation>
??

[zamdam]

Okay, I got it to install and boot up.. But now i dont have internet or sound??

[zamdam]

Okay, I got it to install and boot up.. But now i dont have internet or sound??


I got sound to work and I might have something for the video card. But how about the Marvell etho driver?