Kernel Panic on boot

[Stiui]

Hi guys!

I've tryed to boot iAtkos iDeneb iPc and kalyway 10.5.6 but on boot always the same kernel panic....

I have a mobo asus p4v8x-mx and a p4 2800
Video card :ati x1950pro sapphire
768 Mb ram

Maybe an insufficient hardware?

Thanks^^

[thorazine74]

Dont know if you hardware is sufficient but the info provided is definitely insufficient... :P
Try booting in verbose mode to see whats the panic (-v)
If your board is Via-based you will probably have many troubles getting it to work.

[Stiui]

ok thanks for the answer:)

The verbose say :


display: family specific matching fails
mbinit:done
Security anditing service present
BSM anditing present
From path:"uuid"
waiting for boot volume with UUID 86EE....
waiting on <dict ID = "0"><key>IOProviderClass<key><string ID="1">IOResurces</string ID"1">IOResurces</string><key>IOResourche Match....

USBF 0,996 AppleUSBEHCI[ox28e0000]::UMInitialize = unable to get device memory
USBF : 1,54 .................................................. .............=Error occurred (0xe0002be)


Please contact voodooo team ecc........

panic(cpu 0 caller 0x001A8FFD):Kernel tap at 0x1b68d002,type 14=page fault,register:
......
.....
.....

Debugger called :<panic>
Backtrace (CPU 0)frame : return Addres(4 potential args on stack)
............
...........
..........

Backtrace terminate -in valid frame pointer 0
Kernel loadable modules in backtrace(with dependencies)
com. apple.iokit.IONDRVSupport(1.5.2)@0x1b68b000->0x1b698fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x16931000
dependency:com.apple.iokit.IOGraphics Family (1.5.2)@0x16a7c000
BSD process name causes handing to current thread:kernel task


Then what the everest report says for motherboard:

Tipo processore Intel Pentium 4, 2800 MHz (21 x 133) (http://www.intel.com/products/processor)


Nome scheda madre Asus P4V8X-MX (3 PCI, 1 AGP, 2 DDR DIMM, Audio, Video, LAN) (http://www.asus.com/ProductGroup2.aspx?PG_ID=mKyCKlQ4oSEtSu5m)


Chipset scheda madre VIA P4M800 CE (http://www.via.com.tw/en/products/chipsets)


Memoria di sistema [ TRIAL VERSION ]


DIMM1: 64MX64K-40C 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)


DIMM2: Samsung M3 68L3223FTN-CCC [ TRIAL VERSION ]


Tipo BIOS AMI (03/24/06) (http://www.ami.com/amibios)


Porta di comunicazione Porta di comunicazione (COM1)


Porta di comunicazione Porta stampante ECP (LPT1)




if that is not sufficient maybe this evening or tomorrow I will post a photo about the verbose mode....


Thanks a lot!

[thorazine74]

Wow too many troubles in that log...
First the waiting for boot volume means your SATA or IDE chipset controller is not detected or supported.
The problem with USB may not be fatal so not really important unless you lose USB functionality.
The kernel panic seems to be related to graphics card framebuffer, if you have onboard graphics maybe thats the one causing it, if you have another card you can try disable the onboard.

[Stiui]

thx but i tryed to unplug the agp ati x1950 and use the onboard video card that seems to be an S3 or VIA or something...the boot goes fine!
Probably i will never able to have a resolution better than 1024 768 but i don't know why the ethernet card doesn't work with the rhine kext installed....
It is a VIA Rhine ethernet!

The USB works very well.


How can I disable the onboard card e replug the ati 1950?

[thorazine74]

If you can boot with the onboard maybe the problem is the ATI then, or using both the onboard and the pcie at the same time... specially if they are based on diff chipsets.
Look in the BIOS settings, but I think most motherboards' default settings are to disable the onboard video when a pci card is plugged in.