ATY_Init.kext for Nvidia gf 8400gs 512mb pci-e

[vfxpro]

hi milanca thank for ur response....as u said ""Remove the kext you already tried with, like nvinject etc.. Try with this ATY_init by netkas.

http://www.mediafire.com/?jtzgzlumlnv

regards ""

i followed what u said....i removed previous kext NVDarwin....then i installed ATY_Init.kext also gave the permission at terminal

sudo -s
password:
sudo chmod -R 755 /System/Library/Extensions/ATY_Init.kext
sudo chown -R root:wheel /System/Library/Extensions/ATY_Init.kext
sudo rm /System/Library/Extensions.mkext
exit
reboot
then my display same with jus only 1024x768 resolution

http://img18.imageshack.us/i/aftratyinitkext.jpg/

is there anything else do i need to edit at info.plist or any other thing i have to follow...thank u..

[diskeeper]

Delete the Video card EFI string from com.apple.Boot.plist.

[vfxpro]

Remove the Video card EFI string from com.apple.Boot.plist.

how shall i remove the string frm efi....jus post me the steps to be followed thank u....

[diskeeper]

Go to Library/Preferences/SystemConfiguration/
copy the com.apple.Boot.plist to Your desktop. Open with text edit.
Remove these 2 lines:
<key>device-properties</key>
<string>many numbers here :)</string>
Save the file, then copy back to original folder.
If You use Chameleon 2, this file is located in the Leopard partition/Extra folder. Copy here too & reboot.

[vfxpro]

Go to Library/Preferences/SystemConfiguration/
copy the com.apple.Boot.plist to Your desktop. Open with text edit.
Remove these 2 lines:
<key>device-properties</key>
<string>many numbers here :)</string>Save the file, then copy back to original folder.
If You use Chameleon 2, this file is located in the Leopard partition/Extra folder. Copy here too & reboot.


sorry ...hello diskeeper i followed ur steps....mine is chameleon v1.0.12 (i saw at darwin prompt wen boots) then at desktop i edited com.apple.boot.plist using edit text..then replaced with tat original then i rebooted then i checked at desktop here we go http://img200.imageshack.us/i/aftrremoving2lines.jpg/

again same resolution.....anything else more to follow thank u ....:)

[diskeeper]

Please add more information for me. Machine specs, distro, version number.

[vfxpro]

Please add more information for me. Machine specs, distro, version number.

my specs :
intel pentium 4 solo processor
intel d915gavl motherboard
250gb sata
1 gb ddr1 RAM
ideneb 10.5.6
voodoo kernel
nvidia gf 8400gs 512mb pci-e 64bit ddr2
vedor id NVIDIA (0x10de)
dev id 0x0422

here we go my mac (ideneb) http://img25.imageshack.us/img25/4493/aboutmac.jpg

my current display http://img200.imageshack.us/img200/6144/aftrremoving2lines.jpg


need anything else more...i may sure....thank u....

[eMatoS]

I had a similar problem with this video card when I flashed it's bios with a similar one (another maker). No injector or efi string could let me change the resolution and I had some artifacts also browsing the web. Finally I flashed back the original bios and it's all right now.
What I mean is that maybe some bios (8400gs line) are the trouble, not the injector.
Anyway it's a bit risky but not impossible but you'll need to get an updated bios file for that.

[vfxpro]

I had a similar problem with this video card when I flashed it's bios with a similar one (another maker). No injector or efi string could let me change the resolution and I had some artifacts also browsing the web. Finally I flashed back the original bios and it's all right now.
What I mean is that maybe some bios (8400gs line) are the trouble, not the injector.
Anyway it's a bit risky but not impossible but you'll need to get an updated bios file for that.

hello friend...hw to update my bios....i hav intel 915 GAVL motherboard.....if update my bios is there any problem....u may post the steps to upadet my bios (intel 915 GAVL motherboard )....will any probelm accure...? thank u

[diskeeper]

Read this... &
Delete the Aty_init.kext, and try this http://www.fileqube.com/shared/kIJhBN99908

[eMatoS]

I meant the video bios. You can find many bios here:
http://www.mvktech.net/component/option,com_remository/Itemid,26/func,select/id,58/
Once you get the one you need follow this guide:
http://www.techpowerup.com/articles//overclocking/vidcard/34/1
There you can download the tools and choose the booting method (it should be done in dos)
I'll be here if you need some help choosing the right bios file.

Anyway, this is the last method you should try, so keep the faith and try everything.

[vfxpro]

Read this... &
Delete the Aty_init.kext, and try this http://www.fileqube.com/shared/kIJhBN99908

hi diskeeper....i removed aty_init.kext & installed that 9f23 package ...after finishing ....i opened up EFI studio in that i selected my graphic card nvidia gf 8400gs 512mb ...then jus clicked write to com.apple.boot.plist ....then rebooted...it starts up to apple logo then it freezes & again & again restarts repeating same....i dont know what to do....now it is not proceeding into desktop(ideneb).....please help me....:confused: thank u.....

[vfxpro]

I meant the video bios. You can find many bios here:
http://www.mvktech.net/component/option,com_remository/Itemid,26/func,select/id,58/
Once you get the one you need follow this guide:
http://www.techpowerup.com/articles//overclocking/vidcard/34/1
There you can download the tools and choose the booting method (it should be done in dos)
I'll be here if you need some help choosing the right bios file.

Anyway, this is the last method you should try, so keep the faith and try everything.


hey man...there is no exact bios file for my graphic card "nvidia gf 8400gs 512mb pci-e at http://www.mvktech.net/component/option,com_remository/Itemid,26/func,select/id,74/orderby,2/page,9/

what shall i need to do now...? thank u....

[vfxpro]

Read this... &
Delete the Aty_init.kext, and try this http://www.fileqube.com/shared/kIJhBN99908


hey diskeeper ...after installing 9f23 file frm http://www.fileqube.com/shared/kIJhBN99908[/quote]

it freezes again...but i removed the file 9f23package from the root menu by

-s mode
/sbin/fsck -fy
/sbin/ mount -uw /
cd /System/Library/Extensions
rm -R NV*
reboot

now got my desktop (ideneb)

what shall i need to follow next...?thank u....

[diskeeper]

Sorry, I forgot the first link:

Read this: http://www.insanelymac.com/forum/index.php?showtopic=83944

and try this http://www.fileqube.com/shared/kIJhBN99908

[vfxpro]

Sorry, I forgot the first link:

Read this: http://www.insanelymac.com/forum/index.php?showtopic=83944and try this http://www.fileqube.com/shared/kIJhBN99908

no men..it again & again getting freeze.....i dont know what to do...? ....thank u...

[vfxpro]

Sorry, I forgot the first link:

Read this: http://www.insanelymac.com/forum/index.php?showtopic=83944and try this http://www.fileqube.com/shared/kIJhBN99908

i tried almost all it seems...."nvinject 0.2.1 ,nvdarwin ,nvinstallerv51 ,nvinstaller v41 ,9f23 installer .,but nvdarwin & nvinject after installation i'm getting desktop., but when i try nvinstaller i'm not getting desktop (ideneb)....next what shall i try...? thank u....

[diskeeper]

The last probe...

Install these 4 kext with kext helper!

http://www.mediafire.com/download.php?kizdzgdyzny

[vfxpro]

The last probe...

Install these 4 kext with kext helper!

http://www.mediafire.com/download.php?kizdzgdyzny


no need to install anthing else rite...jus these 4 kexts is enough ha...?

[vfxpro]

The last probe...

Install these 4 kext with kext helper!

http://www.mediafire.com/download.php?kizdzgdyzny


after installing these four kexts ...then what shall i need to type at terminals...? i mean permission for these files....because it contains nvinject kext, geforce kext, nvresman kext, nvdanhal50 kext. ? thank u...:)

[vfxpro]

The last probe...

Install these 4 kext with kext helper!

http://www.mediafire.com/download.php?kizdzgdyzny


hi men i installed using kext helper....but after restart it again same procedure...(freezes) not able to get in desktop (ideneb).......anyway thank u for ur help.....i dont have luck to work wit ideneb on my pc.....its ok....

[milanca]

ATY_init by netkas, thats one of the latest gfx injectors for both ati and nvidia seems to work great.. i tested it once and it worked on 8500GT and 8600GT where for example nvinject failed.

You seemed to do install kext properly (if all other injectors had been removed) but you forgot to rebuild extensions' cache with kextcache command, or boot -f to force rebuilding it.

[vfxpro]

ATY_init by netkas, thats one of the latest gfx injectors for both ati and nvidia seems to work great.. i tested it once and it worked on 8500GT and 8600GT where for example nvinject failed.

You seemed to do install kext properly (if all other injectors had been removed) but you forgot to rebuild extensions' cache with kextcache command, or boot -f to force rebuilding it.
hi...i think i have done a mistakes so far....i use this command to remove NV* , Ge* at the root device by -s mode
/sbin/fsck -fy
/sbin/mount -uw /
cd /System/Library/extensions/
rm -R NV*
rm -R Ge*
reboot

then all geforce kext & NV kext deleted at /Systems/Library/Extensions/

when ever i install NVinject or NKkush or NVDarwin or NVinstallerv41 or v51 or 9f23 nothing can be found there....so what should now to follow cleanly.....thank u for ur reply....

[vfxpro]

ATY_init by netkas, thats one of the latest gfx injectors for both ati and nvidia seems to work great.. i tested it once and it worked on 8500GT and 8600GT where for example nvinject failed.

You seemed to do install kext properly (if all other injectors had been removed) but you forgot to rebuild extensions' cache with kextcache command, or boot -f to force rebuilding it.

hi milanca...i followed ur steps now...i deleted nvinject & then i installed ATY_Init.kext by this method
sudo -s
password:
cd ..
cd ..
cd ..
cd System/
cd Library/
cd Extensions
chmod -R 755 ATY_Init.kext
chown -R root:wheel ATY_Init.kext
cd ..
rm Extension.mkext
kextcache -k Extensions
reboot

then i also check whether it shows all resolutions but no other resolution came except 1024x768
then i next removed two lines under com.apple.boot.plist
<key>device.properties</key>
<string>many numbers here :)</string>

then i gave these permissions
sudo -s
password:
cd ..
cd ..
cd ..
cd System/
cd Library/
cd Extensions
chmod -R 755 ATY_Init.kext
chown -R root:wheel ATY_Init.kext
cd ..
rm Extension.mkext
kextcache -k Extensions
reboot

then my display shows like this http://img200.imageshack.us/i/aftrremoving2lines.jpg/

anything else i wanna do it...? thank u

[vfxpro]

hi milanca...i followed ur steps now...i deleted nvinject & then i installed ATY_Init.kext by this method
sudo -s
password:
cd ..
cd ..
cd ..
cd System/
cd Library/
cd Extensions
chmod -R 755 ATY_Init.kext
chown -R root:wheel ATY_Init.kext
cd ..
rm Extension.mkext
kextcache -k Extensions
reboot

then i also check whether it shows all resolutions but no other resolution came except 1024x768
then i next removed two lines under com.apple.boot.plist
<key>device.properties</key>
<string>many numbers here :)</string>

then i gave these permissions
sudo -s
password:
cd ..
cd ..
cd ..
cd System/
cd Library/
cd Extensions
chmod -R 755 ATY_Init.kext
chown -R root:wheel ATY_Init.kext
cd ..
rm Extension.mkext
kextcache -k Extensions
reboot

then my display shows like this http://img200.imageshack.us/i/aftrremoving2lines.jpg/

anything else i wanna do it...? thank u


anything else do i wanna change...? thank u...

[Hypknotik]

Amd Phenom 8200 Triple Core Processor
4GB DDR2 Ram
WESTERN DIGITAL HARDRIVE
Nforce 430 Chipset
Realtek Sound
Nforce Ethernet
GeForce 8400 GS 512mb
IPC 10.5.6 Universal pppc5