PDA

View Full Version : Can not get to the installation (10.5.2)


guliath
02-19-2008, 10:30 AM
Hey i'm having a problem with the new dvd.

i boot from dvd, and hit f8, and -v, to see what's happening

the first thing i've noticed, is that it says there's no AppleNforceATA.kext found or something like that,

and later it says, disk2s2: unsupported mode, and other things related to that, and it seems to try over and over again, and finally the pc turns off, i've never seen anyone having this prblem!
and what's strage too, is that the 10.5.1 dvd that i have, enters the installation, but not the new one.


what should i do? please help!


mother: asus m2n-mx

cpu: amd athlon 64 x2 4200

ram: 2gb (4x 512mb) kingston

hard drives: 160 sata western digital (whith windows xp, and linux freespire in it) and 250gb sata II western digital (where i want to install osx)

drives: dvd-rw lg

rumar4u
02-19-2008, 10:34 AM
Just in case, Not sure if will help but, try to De-Select your other HDD from the BIOS (put it to NONE) and try it again

guliath
02-19-2008, 10:46 AM
yep i've already done that, the PROBLEM is when it says

disk2s2: unsupported mode

it also says that it's unable to write the root, something like that, that it's read-only, i'm saying what i remember, cause i have only this pc.

the AppleNforceATA.kext thing, is different, it says that no drives are found, but AppleNforceATA.kext it IS found

guliath
02-19-2008, 10:47 AM
please someone help

eddie11c
02-19-2008, 11:13 AM
The install DVD will always show that the root file system is read only, as it's on a DVD. If AppleNforceATA is not finding any drives then there is a problem as your vendor ID is supported. You could try moving your disks around, make sure the DVD is on the primary IDE channel, and just hook the one SATA port your going to use up. Completely disconnect the others.

guliath
02-19-2008, 12:56 PM
thanx eddie, so i should try disconnecting the other hdds, and changing the hdd that i'm planing to use from one sata to other to see if it works?

i've already tried with the other hdd disconected anyways.

any ideas?

guliath
02-19-2008, 01:00 PM
and what about the disk2s2: "unsupported mode" thing?

(by the way, it's not always disk2s2, when i tried swiching hdds or things like that, it was disk1s2, and on other ocation was disk2s3)

eddie11c
02-19-2008, 08:51 PM
You could try changing the mode of the drive in the BIOS, I can only guess unsupported mode has something to do with the UDMA mode. Or perhaps if there is nothing else on the drive try doing a fresh format on it first.

guliath
02-19-2008, 11:41 PM
thanx, i've tried changing the udma mode a thousand times, and did not work anyways, i don't know what to do.

i've now noticed that when i boot from the old dvd, it does not search for drive units.

in the 10.5.2 it says at first "1 unit found-", and later "0 units found"

and after saying Launched version 5.0

it starts coming disk1s2: unsupported mode, again and again

eddie11c
02-19-2008, 11:46 PM
what partitions do you have on the disk already? whats on partition 2?

guliath
02-19-2008, 11:49 PM
there's just one partition on it, at least that's what acronis disk director suite says, the disk is empty, and new

guliath
02-20-2008, 10:36 PM
some help? anybody? over here!

eddie11c
02-20-2008, 11:00 PM
Try to reformat the disk with just as Fat32 and try again, not sure what else to try.

marazi
02-20-2008, 11:45 PM
i get the "/Library/Preferences/SystemConfiguration/com.apple.Boot.plist not found" message when i boot the dvd... any suggestions to what might be wrong...??

eddie11c
02-20-2008, 11:57 PM
If your getting that error from the DVD then you may need to try burning another copy.

marazi
02-21-2008, 01:49 AM
ive tryed that, burnt with nero and imgburn... got some suggestions for burning...??
is there any other preperations i should do to my disk...?? i have a whole disk to dedicate, as it will be my only os...

marazi
02-21-2008, 02:47 AM
anyone...?

eard
02-21-2008, 06:28 AM
marazi:i get the "/Library/Preferences/SystemConfiguration/com.apple.Boot.plist not found" message when i boot the dvd... any suggestions to what might be wrong...??
mmmm are you sure that you set the partition where do you wanna install leopard as active?
in vista menu start->cmd enter->diskpart->select disk X(x is the number of your disk)-> list partiton->select partition Y(Y is the number of the partition where do you wanna install leopard)->active->exit
then put the leopard dvd inside the pc and tell if works :)
thats how i can help you men
cya

marazi
02-21-2008, 08:27 AM
ive tried that...
but i think it might be my disk / disks thats the problem...
tried with a 10.5.1 dvd, and got an HFS error then the same message came up and it got stuck...

my system:
HP PavillionDV9000ea
AMD Turion 64 x2
Nvidia Nforce Chipset with Serial ATA Controllers
2 x 80gb ST98823A S SCSI Disc device on Unknown SCSI/RAID HOST CONTROLLER

this is getting soooo frustrating...
downloading the tubgrl 10.4.9 to try that one out too, even though i dont think it will work :(
so...
what can i do...??

eddie11c
02-21-2008, 08:40 AM
An option you could try, instead of burning the ISO to another DVD, partition your disk into 2 with one of the partitions being about 8gigs. Burn the ISO to the partition instead of a disk. Try booting from the partition. You will need something to use such as ubuntu to format the HFS+ partitions. But they are easy to obtain and use, and it may be worth a shot.

marazi
02-21-2008, 08:53 AM
ok...
will try that, but how do i "burn" the iso to the partition...??