3 issues for Eddie's brain

[Snow]

Eddie, you seem to have the biggest brains around here and make alternative kexts so here goes.

I still have the ALC850 6/2 channel bug and hope you can write an alternative kext for it. Problem is that whenever I boot Logic or Garageband the audio app sets channels to 6 instead of 2. That would not be irritating if it would actualy still output audio through my 2 front speakers. I seems to randomly switch channels since the ALC850 is 8 channel and OSX only recognizes 2. There's also a thread on Insanelymac about this (if you want I'll paste the link)
If you could somehow make Leo only recognize 2 channels or a way to block the other channels settings, then that would be great.

Alright on to the next issue. I'm using a POD XT Live USB 1.1 device with my guitar hooked up. This one works very well in Logic but after about half an hour or longer I get dropouts. I think I have lots of dropouts whenever I have used the net. Now I know when doing audio it's a bad idea to use net and if you can tell me if its indeed net related then I will have to look no further and look for a solution. I dont think its a Latency issue since it buffers at 256ms no porbs during the first hour or so.
ALSO and maybe more important I get dropouts from my midi USB 1.1 keyboard (m-audio evolution mk461c)
I'm playing and then all of the sudden the keyboard goes dead untill I trun it off and back on. Then it reinitializes it and the midi data is sent again.

3rd problem is with Firewire. I recently bought an Presonus Inspire 1394. It works for audio playback but whenever I plug in my guitar I get electrical noises every few seconds (kind of looped)
This happend plugged into my Audigy 2 ZS FW port so I bought an ASUS A8N SLI Premium board with the FW Texas Instruments chipset (seems to be recommended for use with FW aduio devices) but I get exactly the same issue.
Could this be Video/Nforce related? PCi latency or some kind.
This does not happen in Windows Vista on Sonar 7 so it's OSX related. I would love to use OSX86 for DAW but so far I have way too many issues to rely on it.

Thx for the help in advance and hopfully you can work something out bro

If you need more info then just shout alright, Laters ;)

[eddie11c]

Funny, I have the same chipset for my audio so you may be in luck. I think this is the right one, give it a try.

[Snow]

Hi Eddie,

This did not fix it but it gave me SPDIF for output (not needed but nice to see it added)

I have made a vid clip showing the isse. While loading Logic or Garageband the audio/midi config app switches to 6channels. Try it out bud, everyone should experience this issue.

Clip: http://www.sendspace.com/file/3nv2ou

[Snow]

You probably need some sys spec too right, hmm sorry about that ;)

I'll copy paste my sig from insanelyboard

LEOPARD 10.5.2 (EFI v8) GUID

MOBO: ASUS A8N SLI PREMIUM (NF4) / CPU: A64 X2 4200+ @ 2470Mhz / RAM: 2GB GEIL RAM @ 400
GPU: XFX 7800GT (CI/QE) to SAMSUNG Syncmaster 2232BW (1680 x 1050, DVI)
SOUND: ALC850 on board (stereo) to Creative T5400 5.1 speakers (using line in on sub)
NET: Onboard MARVELL YUKON 88E81001
SATAII: SEAGATE 250 GB 16mb (XP X86/Vista X64) / SATAI : MAXTOR 250GB 16mb: Zephyroth 10.5.1 + Eddie's 10.5.2 Update for AMD package / EXTERNAL USB PATA: Tubgirl 10.4.10 / DVDRW: PHILIPS 1640k (PATA)
KEYBOARD: LOGITECH Media Elite (USB, layout edited with Ukelele and extra media keys with Quickeys)
MOUSE: CREATIVE 5500 (USB)
PRINTER: HP PHOTOSMART 8250 (USB)

Xbench: 151.28 / Geekbench: 5199

And here's the thread on insanely: http://forum.insanelymac.com/index.php?showtopic=15173&st=0

Have you got any ideas why my FW or USB devices have interference?

Thx

[eddie11c]

ok give me a sec, trying something. Might have a fix for it.

[Snow]

Gotta go but will can't wait to try out what you're cooking over there ;)

bb in an hour or so bro, n thx

[eddie11c]

Ok have you tried adding an aggregate device for the 6 channel setup and forcing it back to 2 channel? it might work/worth a shot. Open up the Audio Midi setup in utilities. Click up in the top bar on audio and Open Aggregate Device Manager. Make a new Aggregate for 4 channel and one for 6 channel. Then select the properties of each Aggregate Device and Change the Audio Output for each Stream Back to 2 channel. I don't currently have Garage band installed to test myself.

[Snow]

Will try this now bud

[Snow]

I don't quite get it but do you mean like the picture attached?

I've selected the correct speakers and stereo for speaker config output. And I've tried using the AC97 and aggregate dev as default device, no dice.

But I could have it set wrong, if so, my apologies and please explain a bit more (is that even possible lol?)

Also, selecting 2ch is a lot louder then 6ch even when 6ch are set up for Stereo and with speakers 1 & 2 (same as for 2ch)

Oh now wait a minute, I'm using this small app made by someone from insanelymac board to switch my channels back to two. It's attached too so you will know what I mean. But this app probably sets the volume to max (not main volume) hence the difference when switching. Cause when I switch from 6 to 2 channels inside the audio/midi config app there is no difference in volume. I'll try some more things.

[eddie11c]

ok down at the audio out portion of your screenshot click where you see the 6-ch/16-bits and change that to 2, also edit the aggregate and remove the input from it. leave that one separate.

[Snow]

And one more issue, but this has nothing to do with my audio issues. I can't seem to get time machine working although it worked perfectly before I messed up my Zeph 10.5.1 install by trying to update myself.
Time Machine freezes every time I try to backup . I have tried a few IONetworking kexts but no go. Could you possibly up yours m8?
Is it working for you?

[eddie11c]

No time machine for me till I get my new hard drive tomorrow. I only have 3 drives, 1 windows/1 leopard and 1 for leopard that I use to break/test stuff on.

[Snow]

Hmm no bud, no matter what, it always sets 6ch and then when I use iTunes the sound is gone until I set the audio/midi app config back to 2ch or use the app from attachement.

[Snow]

Allright, I'll check around for a proper fix for time machine.

Editing the kext and somehow removing 6 channels option from it, is that possible?

I think we need to force 2 channels only by removing other options.

[Snow]

Eddie, I'm getting these error msgs when runningTime Machine. Are they linked to the issue I'm having with Time Machine freezing afetr a few gigs of backup?

Thx

[zephyroth]

Try another version of "translate". The one from 10.5.1.
it's located in "/usr/libexec/oah".

[Snow]

Hey Zeph, all good?

m8, I'm on 10.5.2 now and removed all backups from 10.5.1 since I thought I was good to go.

Could you attach it pls, thx bud n take care.

[eddie11c]

What zeph is saying that the DVD contains the 10.5.1 version in that location, he uses a package later in the install to update it to 10.5.2.

[Snow]

Alright, I knew it had to be something like that. It's just that it's hidden so I figured it wasn't on the DVD.

Trying now, it holds 2 files by the way, original and prob modified one. Trying the modified first.

Another error btw, ssave related. Time Machine worked without any probs before. Issues keep on stacking up. Most people don't have issues mainly because they only use half of OSX.
I'm getting oh so tired lol. Solved a lot of issues already but now it's getting silly and for what I want to use it for (audio) it is practicaly like hooking up my guitar to a gameboy.
It's good for some office stuff and some PS, especialy on AMD I reckon, but if you want to do some serious work it just cant seem to hack it.
Even when I get time machine fixed, what use is there for Time Machine if I don't have a proper working DAW.

Sorry bout the nagging lads but I'm so fed up with PC's. Before trying to get shit done with OSX86 I was fiddling with Windows OS's.
I don't want to go back to windows with Cubase SX now that I know a bit of Logic (and I love apple loops)

Oh well, stop nagging Snow and throw it out of the window.

Later guys, I'll post back if Time Machine is working this time (I highly doubt it)

[Snow]

Alright, Time Machine is still backing up after 13 gigs so I'm thinking it's good to go since before it crapped out at a few gigs.

Console is showing the same error though with translate.

Update: Same error but lssave related now, any idea if this can be replaced also? and location on DVD? Checked but no go in /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServices.framework/Support/lsregister on DVD

[Snow]

Thx for the heads up Zeph ;)