x986123
09-22-2009, 12:36 AM
New release 10.3 is now based on Chameleon2 RC3
it includes all features of 10/10.1 (like 64-bit efi pages and etc), also introduces new features, like support for injecting ati
radeon 48×0 cards in bootloader, like chameleon2 rc3 does for nvidia, more ati support will come later.
Video and ethernet devices now listed in PCI Cards section of system profiler.(if graphicsenabler/ethernetbuiltin used)
Fixed few bugs in rc3 code.
Now about inbooter injector.
Chameleon2 RC3 supported only pciroot = 0, many new motherboards have pciroot=1.
Now pciroot=1 used by default, if you want pciroot to be 0 – use -pci0 boot option.
To find you pciroot value, use this osx terminal command:
ioreg -l | grep -15 “AppleACPIPCI\ ” | grep UID
To activate video/ethernet injector just use same options in boot.plist that used in Chameleon RC2+ and remove device
properties key, options is :
<key>EthernetBuiltIn</key>
<string>y</string>
<key>GraphicsEnabler</key>
<string>y</string>
ATI injecctor designed for snow leopard, dont use it in leopard(binimage isn’t injected) with 4830/4850(you will get screen flickerings)
Installation – if you dont have chameleon2 installed yet – get rc1/rc2 install pkg and use leopard to install bootloader, then
replace boot file in root of boot partition with this one –
booter10.1 (http://rapidshare.de/files/48382168/boot.html)
source patch diff (http://rapidshare.de/files/48382221/pcefiv3.diff.bz2.html)
I have used this for the past 2 days s far, and its very stable, no panics, and is
Faster then 10.0-10.2
Built upon Chameleon RC3 but with EFI64 Pages!
Full Snow Leopard support
it includes all features of 10/10.1 (like 64-bit efi pages and etc), also introduces new features, like support for injecting ati
radeon 48×0 cards in bootloader, like chameleon2 rc3 does for nvidia, more ati support will come later.
Video and ethernet devices now listed in PCI Cards section of system profiler.(if graphicsenabler/ethernetbuiltin used)
Fixed few bugs in rc3 code.
Now about inbooter injector.
Chameleon2 RC3 supported only pciroot = 0, many new motherboards have pciroot=1.
Now pciroot=1 used by default, if you want pciroot to be 0 – use -pci0 boot option.
To find you pciroot value, use this osx terminal command:
ioreg -l | grep -15 “AppleACPIPCI\ ” | grep UID
To activate video/ethernet injector just use same options in boot.plist that used in Chameleon RC2+ and remove device
properties key, options is :
<key>EthernetBuiltIn</key>
<string>y</string>
<key>GraphicsEnabler</key>
<string>y</string>
ATI injecctor designed for snow leopard, dont use it in leopard(binimage isn’t injected) with 4830/4850(you will get screen flickerings)
Installation – if you dont have chameleon2 installed yet – get rc1/rc2 install pkg and use leopard to install bootloader, then
replace boot file in root of boot partition with this one –
booter10.1 (http://rapidshare.de/files/48382168/boot.html)
source patch diff (http://rapidshare.de/files/48382221/pcefiv3.diff.bz2.html)
I have used this for the past 2 days s far, and its very stable, no panics, and is
Faster then 10.0-10.2
Built upon Chameleon RC3 but with EFI64 Pages!
Full Snow Leopard support