My mouse doesn't work in iPC 10.5.6 final

[eskild12]

Hey I have installed iPC 10.5.6 without any error but when i have installed and is going to fill in password and such a things my mouse won't work but i can get pass the account creation with my keybord but when Leopard shows home screen i can only move my mouse little and it lagg like hell it jump forward and it works to click . I use a USB mouse Razer krait but i have tried with other mouses to but none worked.

Thanks for all help :)

[razy60]

what drivers did you select in customization?

Raz

[eskild12]

I use this drives:
Kernel voodoo 9.5.0 because i have AMd pc
Video drive is: NVinject 0.2.1 256mb vram. But My mouse work with some video drives but the screen only work with 1024xXXX don't remember. My screen is 1068x1050 so it will not work with the other drives....
Chipset: AppleNForceATA nForce Drivers

That is all but i have tried the PS/2 fix but didn't work

If you need more info just say :)

[razy60]

You could try voodoops2 from voodooprojects.
You would need to uninstal your current ps2 drivers , the instructions they give are easy to follow.
Also you may want to try a smbios patch, patch dsdt, and maybe usb mount fix,
The other thing is if you look in the Insanelymac forum go to the OSX86wiki and look up your components see what you need to install or uninstall, it takes some reading but it does help

Raz

[thorazine74]

If your mouse is connected to USB installing PS/2 kexts wont affect it, obviously.
Try removing nvinject, maybe the acceleration is the one causing the lag.

[eskild12]

I have tried that and My mouse works then but My screen resoulition is 1024xXXXX something then and My screen is 1068x1050

[thorazine74]

Try using another injector to get accelerated graphics instead of nvinject, try NVEnabler (http://www.projectosx.com/forum/index.php?showtopic=370&st=0) for example.

[eskild12]

Can't try it because my mouse don't work in mac os x after i have installed so can't click to install kext :(

[thorazine74]

If your mouse works without acceleration but lags when acceleration is enabled, maybe you have some conflict between the graphics and the usb. I dont have any more suggestions, maybe you should post your hardware setup just in case someone with the same setup has a solution.
You may still be able to make the desktop work in your native resolution (though with software acceleration) with a kernel flag boot.plist
like:<key>Kernel Flags</key>
<string>"Graphics Mode"="1680x1050x32"</string>

[eskild12]

I have just make it work. Yeasterday i reinstalled mac os x for like 20time and i boot in it and mouse don't work but today i just wanted to try to boot it. I booted with -f and my mouse works 100% i don't know how but it works.

Thanks for all the help :)