Leo 10.5.6 Retail on MSI P43 NEO3 didnt work

[M4nfr3D]

Hi, i hav problem.

I boot Retail with -f -v & boot132 method and works fine. In next step screen freeze in this:
http://img97.imageshack.us/img97/9159/img4549.th.jpg (http://img97.imageshack.us/i/img4549.jpg/)
Direct link, if thumbnail dont work:
http://img97.imageshack.us/img97/9159/img4549.jpg


Hardware:
MSI p43 NEO3
-hdd & dvd on sata
-ICH10/R
-ALC888
-P43
Intel C2D e7500
Palit nVidia gForce gts250
Patriot 2x2gb cl5

Any sugestions?
Please help.

[M4nfr3D]

refresh

plz help.

[mm67]

refresh

plz help.

You need to make a dsdt.aml for your board or use a modded bios from here:
http://www.osxcores.site50.net/product-1.htm

I would not use a modded bios from that site, they are all very old now and risk to kill your board is quite high. It really isn't very hard to create your own dsdt.aml.

[M4nfr3D]

Ok, thanks, but i think that risk is too high, maybe in future i do this.

Do you know what distribution will work without any problems?
iPC? Kalyway?

[mm67]

Ok, thanks, but i think that risk is too high, maybe in future i do this.

Do you know what distribution will work without any problems?
iPC? Kalyway?

If you just dump the original dsdt from Windows or Linux and post it here then I can help you patch it enough to get your system booted

[M4nfr3D]

Where to get original dsdt?

sorry, im lame >.<

[mm67]

Where to get original dsdt?

sorry, im lame >.<

If you have Windows on your machine then boot to it, get Lavalys Everest corporate edition and use Acpi tools to exctract your dsdt from bios. Other option is to get Ubuntu livecd, boot to it, run terminal, sudo su and cat /proc/acpi/dsdt > dsdt.dat. Then post that dsdt.dat here.

[M4nfr3D]

Today i will to try extract dsdt, but i found in the web modded bios for my motherboard:
http://www.osxcores.site50.net/product-1.htm
(use Ctrl+F combination and type in search box "7514")
What do you think about it?

[thorazine74]

Its always better to use a DSDT file than patching your BIOS with some foreign BIOS you dont know if it works or not.
If you use a bad DSDT file that doesnt work you just delete the file and you are set. If you put a BIOS with a bad DSDT in your mobo you may not able to recover from it (easily).
There are many ways to extract DSDT:
- Everest Corporate.
- Linux LiveCD
- From inside OS X if you have a running system.

[mm67]

Today i will to try extract dsdt, but i found in the web modded bios for my motherboard:
http://www.osxcores.site50.net/product-1.htm
(use Ctrl+F combination and type in search box "7514")
What do you think about it?

Like I told you already, risk of killing your board is quite high and you also get a very old bios using that method.

[M4nfr3D]

ok, i have Everest corp edition, and what next?
Where is option for export dsdt?

[mm67]

ok, i have Everest corp edition, and what next?
Where is option for export dsdt?

Right click status bar at the bottom of Everest window, you should now see a menu which has ACPI tools. Open it and select save dsdt.

[M4nfr3D]

Ok, thanks.
Dsdt: http://www.megaupload.com/?d=PZMGD9UF

thats it?

[mm67]

Ok, thanks.
Dsdt: http://www.megaupload.com/?d=PZMGD9UF

thats it?

Yes, that is it. Here you go:
796

Put dsdt.aml file in Extra folder, and keep decompiled original and fixed one in safe place should you need to do more modifications.

[M4nfr3D]

But how put this file in Extra folder if the screen freeze on
http://img97.imageshack.us/img97/9159/img4549.th.jpg (http://img97.imageshack.us/i/img4549.jpg/)
And lnstaller is not loaded?

Maybe I need to download another distro of Leo which is modified and installer will work to prepare retail on second hdd?

[mm67]

But how put this file in Extra folder if the screen freeze on
http://img97.imageshack.us/img97/9159/img4549.th.jpg (http://img97.imageshack.us/i/img4549.jpg/)
And lnstaller is not loaded?

Maybe I need to download another distro of Leo which is modified and installer will work to prepare retail on second hdd?

No need to play with distros, use retail. This dsdt will work with both Leo and SL. Just make a bootcd or better yet a bootable usb stick with Chameleon.

[M4nfr3D]

Shortly i check that my mobo support boot from usb.
Could You tell me, where to get the bootable image chameleon?

[mm67]

Shortly i check that my mobo support boot from usb.
Could You tell me, where to get the bootable image chameleon?

If you have a computer running OS X then I can make an image of my stick. If you don't have access to a Mac or a Hack then you have to make a bootcd or find some way to make bootable stick using Windows. I think I saw a Chameleon installer for windows somewhere, use google.

[M4nfr3D]

Okay, i prepare my pendrive, and Chameleon works, but i dont know what to do now with the dsdt.

[mm67]

Okay, i prepare my pendrive, and Chameleon works, but i dont know what to do now with the dsdt.

On the stick you need to have an Extra folder that has contents like this:

798

[M4nfr3D]

Where create it?

http://img39.imageshack.us/img39/6216/91887118.jpg

[mm67]

Where create it?

http://img39.imageshack.us/img39/6216/91887118.jpg

This is how my stick looks like, this one can boot both SnowLeo and Leopard.
799

[M4nfr3D]

If I create Extra folder, chameleon will read files in him?

Maybe You can put modified dsdt for my mobo on your stick and share image of it for me?

[mm67]

If I create Extra folder, chameleon will read files in him?

Maybe You can put modified dsdt for my mobo on your stick and share image of it for me?

I can if you have access to a computer running OS X, otherwise it is useless to you because it's on HFS+ formatted Guid partition, Windows won't read that.

[M4nfr3D]

Aha, ok.

If I create Extra folder, chameleon will read files in him?

[mm67]

Aha, ok.

If I create Extra folder, chameleon will read files in him?

Yes, that's how it works, I think the most minimal setup is to have com.apple.Boot.plist and and dsdt.aml files in Extra folder, and under that you must have Extensions folder with fakesmc.kext.

[M4nfr3D]

I have a problem.
When chameleon is running, I cant choose the option boot from CD, I can only select the hard drive partition that I want to run the system.
By the way.even if i dont have pen drive connected to the computer, chameleon starts, he replaced original bootloader from windows? how to remove it?

[mm67]

I have a problem.
When chameleon is running, I cant choose the option boot from CD, I can only select the hard drive partition that I want to run the system.
By the way.even if i dont have pen drive connected to the computer, chameleon starts, he replaced original bootloader from windows? how to remove it?

To get back to Windows bootloader you need to boot using Windows cd or dvd and then repair the bootloader.

If Chameleon doesn't detect your dvd and you can't get to a Mac then only choice left is to make a boot cd. Else if you have access to a Mac and atleast 8 Gb usb stick then you just restore original dvd to usb stick and boot using that.

[M4nfr3D]

I havent access to Mac : /
I have third hdd, maybe copy dvd with leo to him?

or, what distro will work on my mobo?

[mm67]

I havent access to Mac : /
I have third hdd, maybe copy dvd with leo to him?

or, what distro will work on my mobo?

You can try IDeneb, use boot flag -cpus=1, that might allow you to boot
without dsdt.aml. If you get IDeneb installed somehow, then you have a lot of choices on how to install retail Leo or SL.

[M4nfr3D]

Yes i know, all my mistakes come from that i havent running Mac, only Windows : /

Tommorow i download iDeneb and say whats next

[mm67]

Yes i know, all my mistakes come from that i havent running Mac, only Windows : /

Tommorow i download iDeneb and say whats next

See if you can get started with iDeneb, if it works then we can quickly get you to retail Leo or SL

[M4nfr3D]

Okay, I finished flashing my mobo, i used .rom from this site: http://www.osxcores.site50.net/product-1.htm ( (MS)-7514v14 *P45 Neo3-F *P43 Neo3-F/FR (http://www.osxcores.site50.net/user/image/a7514ims-140.zip))
and whats next?


Edit:
Ach, i forgot.
I downloaded iDeneb 1.4, but after when i type commands (for example -v -f etc) screen freeze on this:
http://img5.imagebanana.com/img/7bczdc1/IMG_4648.jpg

[mm67]

Okay, I finished flashing my mobo, i used .rom from this site: http://www.osxcores.site50.net/product-1.htm ( (MS)-7514v14 *P45 Neo3-F *P43 Neo3-F/FR (http://www.osxcores.site50.net/user/image/a7514ims-140.zip))
and whats next?


Edit:
Ach, i forgot.
I downloaded iDeneb 1.4, but after when i type commands (for example -v -f etc) screen freeze on this:
http://img5.imagebanana.com/img/7bczdc1/IMG_4648.jpg

Ok, start by telling me what hardware you have. If you don't have IDE drives you should disable that JMicron controller in bios.

[M4nfr3D]

MSI 7514
Chipset P43/ICH10R
HDD+DVD on Sata
ALC 888
C2D e7500
Palit GTS 250
Patriot 2x2gb cl5

and i disabled JMicron controller at moment

[mm67]

MSI 7514
Chipset P43/ICH10R
HDD+DVD on Sata
ALC 888
C2D e7500
Palit GTS 250
Patriot 2x2gb cl5

and i disabled JMicron controller at moment

Ok, I don't know how much there is differences in our bios settings because of different models, but let's try these:
Execute bit supprt enabled
Set limit CPUID... disabled

HPET enabled

IOAPIC function enabled

Extra IDE controller disabled

PCI IDE Busmaster enabled
On chip Sata controller enabled
Raid mode AHCI

ACPI Function enabled
ACPI Standby State S3

Intel EIST enabled
Intel C/State tech enabled

I think you should find most of these settings in your bios. Last two may have to be disabled when using a distro, they enable native P-states and C-states and if your distro has Nullcpupowermanagement.kext that may cause conflicts. Try booting iDeneb again with these settings.

[M4nfr3D]

Intel EIST enabled
Intel C/State tech enabledAll without this, is in my bios ;)

All I set up right and this is works ! - Instalator of Mac is running, and windows 7 have bsod but thats no problem :D
But. After installation iDeneb freeze on this:
http://img5.imagebanana.com/img/r6sx9r3v/IMG_4650.jpg
btw, which options choose in instalation? (chipset, fixes etc)

And retail of leo with boot132 freeze on this:
http://img5.imagebanana.com/img/c2m7lbt2/IMG_4651.jpg

[mm67]

All without this, is in my bios ;)

All I set up right and this is works ! - Instalator of Mac is running, and windows 7 have bsod but thats no problem :D
But. After installation iDeneb freeze on this:
http://img5.imagebanana.com/img/r6sx9r3v/IMG_4650.jpg
btw, which options choose in instalation? (chipset, fixes etc)

And retail of leo with boot132 freeze on this:
http://img5.imagebanana.com/img/c2m7lbt2/IMG_4651.jpg

It's been so long since I used a distro that I can't remember all the options anymore, if you provide a list of options I may be able to help. And I don't know what all you have on your bootcd, bit hard to help without that information.

[M4nfr3D]

Ok, all options:
http://img5.imagebanana.com/img/ba8gxwui/1.jpg
http://img5.imagebanana.com/img/ql8bobcl/2.jpg
http://img5.imagebanana.com/img/638s28t/3.jpg
http://img5.imagebanana.com/img/e9rrcl/4.jpg
http://img5.imagebanana.com/img/d9dx9xr1/5.jpg
http://img5.imagebanana.com/img/z7zz36g/6.jpg
http://img5.imagebanana.com/img/b7ksb14m/7.jpg
http://img5.imagebanana.com/img/u28wkta0/8.jpg
http://img5.imagebanana.com/img/1mzf0ag4/9.jpg

[mm67]

Ok, all options:
http://img5.imagebanana.com/img/ba8gxwui/1.jpg
http://img5.imagebanana.com/img/ql8bobcl/2.jpg
http://img5.imagebanana.com/img/638s28t/3.jpg
http://img5.imagebanana.com/img/e9rrcl/4.jpg
http://img5.imagebanana.com/img/d9dx9xr1/5.jpg
http://img5.imagebanana.com/img/z7zz36g/6.jpg
http://img5.imagebanana.com/img/b7ksb14m/7.jpg
http://img5.imagebanana.com/img/u28wkta0/8.jpg
http://img5.imagebanana.com/img/1mzf0ag4/9.jpg

Ok, let's try these:
1. Essential system
2. ALC888 by Taruga (not sure about this since I use usb audio)
3. ICHx Fixed
4. Use vanilla kernel so no choices there.
5. Realtek R1000
6. Openhaltrestart and some bios from AppleSMBIOS submenu
7. No choices there
8. You have such a new graphics card that I don't know if any of these work, try choosing NVInject that matches with memory on graphics card.
9. No need to select anything there.

Good luck

[M4nfr3D]

Ok, let's try these:
1. Essential system
2. ALC888 by Taruga (not sure about this since I use usb audio)
3. ICHx Fixed
4. Use vanilla kernel so no choices there.
5. Realtek R1000
6. Openhaltrestart and some bios from AppleSMBIOS submenu
7. No choices there
8. You have such a new graphics card that I don't know if any of these work, try choosing NVInject that matches with memory on graphics card.
9. No need to select anything there.

Good luck
Freeze on this:
http://img5.imagebanana.com/img/qizq8sv9/IMG_4668.jpg

:|

[00010]

How does one patch the dsdt.aml ,I have USB problems I think are related to not having patched dsdt.aml and in need of assistance.

[mm67]

Freeze on this:
http://img5.imagebanana.com/img/qizq8sv9/IMG_4668.jpg

:|

How far did you get, is this happening at first boot after install or you can't even get to installer ?

[M4nfr3D]

Yes, at first boot, after installation

[mm67]

Yes, at first boot, after installation

If you are able to run the installer then you also have access to terminal, maybe you should try do a proper Chameleon usb stick, including the dsdt.aml that I gave to you. With that you should be able to boot the retail dvd.

[M4nfr3D]

Ok, but i dont know how do that. "chameleon" is a big problem for me and i dunno what to do :F

[SsSnipeRrR]

Hi i'm new to this forum and realize this thread is a bit older but i too have a p43 neof board and access to a mac! so is there anyway someone could tell me what i need to do? thank you so much for any help!