[solved] Two Problems Away From Having A Perfect Snow Hackintosh

[st_7]

Hi, I am just just two noticeable problems from building a perfect snow hackintosh for myself.

Firstly, I am having problems with kernel panic generated by "com.apple.driver.AppleACPIPlatform(1.3)", after much experimentation i found out that the GMA950 hack in my modified dsdt that causing the 'AppleACPIPlatform' kernel panic. I have modified my dsdt for snow leopard using DSDTSE v1.3.3, the dsdt was modified successfully with 0 errors, 0 warnings. But the 'GMA950' hack in the modified dsdt gives "com.apple.driver.AppleACPIPlatform(1.3)" kernel panic when i try to boot snow leopard in 64-bit mode only, no such problems in 32-bit mode. If i remove the 'GMA950' hack(leaving other hacks same as it is) in my modified dsdt, i am able to boot into snow leopard in 64-bit mode. I guess this may be because the 'GMA950' kexts in SL 10.6.0 are 32-bit only(i have read this on the internet), so yesterday i updated to 10.6.2 as i read that it includes 64-bit kexts for GMA950. But the problem still persists. But if i remove the 'GMA950' hack from dsdt, i am only getting only one resolution(both in 32-bit & 64-bit) & sleep is not working. If some one knows the fix for this problem or any 'GMA950' kexts for 64-bit, please let me know.

And this is the kernel panic I am getting when I try to boot into snow leopard in 64-bit mode with 'GMA950' hack in dsdt.

MAC Framework Successfully Initialized
Using 7864 buffer header and 4096 cluster IO buffer header
IOAPIC: Version 0×20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
Panic (CPU 0 caller 0xffffff80002cbf74): Kernel trap at 0xffffff7f80600ee9, type 13=general protection, registers:
CR0: 0×000000008001003b, CR2: 0xffffff7f806c6000,
CR3: 0×0000000000100000, CR4: 0×0000000000000660
RAX: 0xffffff8005849448, RBX: 0xffffff80006972c0,
RCX: 0×0000000000000000, RDX: 0×0000000000000000
RSP: 0xffffff8026dfba90, RSP: 0xffffff8026dfba90
RSI: 0xffffff8005648060, RDI: 0xff00303539414d47
R8: 0×0000000000000003, R9: 0×0000000000000000
R10:0×0000000000000000, R11: 0xffffff80004eae3e
R12: 0xffffff8005851080, R13: 0xffffff8005849400
R14: 0xffffff8005851580, R15: 0xffffff800583cb00
RFC: 0×0000000000010246, RIP: 0xffffff7f80600ee9
CS: 0×0000000000000008, SS: 0×0000000000000080
Error Code: 0×0000000000000000
Debugger Called <Panic>
backtrace (CPU0),
Frame : Return adress
0xffffff8026dfb730 0xffffff8000204aeb
0xffffff8026dfb830 0xffffff80002cbf74
0xffffff8026dfb980 0xffffff2ddd4a
0xffffff8026dfb990 0xffffff7f80600ee9
0xffffff8026dfba90 0xffffff7f8061e800
0xffffff8026dfbb00 0xffffff7f8061b31c
0xffffff8026dfbdb0 0xffffff7f8061cdcb
0xffffff8026dfbdf0 0xffffff8000522e60
0xffffff8026dfbe40 0xffffff800052356b
0xffffff8026dfbee0 0xffffff80005238d9
0xffffff8026dfbf40 0xffffff8000523ac4
0xffffff8026dfbfa0 0xffffff80002c3eb7
Kernel Extensions in Back Trace (with dependencies)
com.apple.driver.AppleACPIPlatform(1.3) @ 0xffffff7f80616000 -> 0xffffff7f80659fff
dependency: com.apple.iokit.IOACPI Family(1.3.0) @ 0xffffff7f80600000
dependency: com.apple.iokit.IOPCI Family(2.6) @ 0xffffff7f80604000
com.apple.iokit.IOACPI Family(1.3.0) @ 0xffffff7f806000000 -> 0xffffff7f80603fff
BSD Process name corresponding to current thread: Kernel_task
Mac OS version : Not Yet Set
Kernel version: Darwin Kernel version 10.0.0: Fri Jul 31 22:46:25 PDT 2009; roo: Xnu-1456.
1.25~1/RELEASE_X86_64, System Model Name: Mac Pro 2,1 (Mac – F4208DC8)
System uptime in nano seconds: 636456096

Secondly, a distorted or blurry sound after waking up from sleep. The sound works quite good with vodoohda put in S/L/E, but after waking up from sleep a blurry or distorted sound comes even for the regular system sounds(deleting files, emptying trash). Can u please tell me how to fix this?.

I hope i get some suggestions from the members.

My system specs are: Intel Core2Duo 2Ghz, Intel 945GCNL motheroard with Onboard GMA 950 graphics, onboard realtek HDA(alc888 codec), onboard realtek 8111/8168 family ethernet, 1.5 GB DDR2 RAM, two 160 GB SATA HDD, One LG IDE DVD RAM drive.

[Sweaty]

I don't know about GMA950, I reckon just run in 32 bit.

Latest voodooHDA 0.2.5.2 is meant to fix sleep issue http://www.projectosx.com/forum/index.php?showtopic=355&st=0&start=0

[Imkantus]

Can you got to SystemProfiler and look up your GMA950's Device-ID?
Maybe there is a working EFI-String or Natit based solution for it? :)

[st_7]

First of all thank you very much for your answers.

Can you got to SystemProfiler and look up your GMA950's Device-ID?
Maybe there is a working EFI-String or Natit based solution for it? :)

Intel GMA 950:

Chipset Model: GMA 950
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x2772
Revision ID: 0x0002
Displays:
Display Connector:
Status: No Display Connected
SyncMaster:
Resolution: 1024 x 768 @ 75 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported

I tried booting into snow leopard in 64-bit mode with dsdt(without gma950 hack) & efi string that i used in iatkos v7 10.5.7, i was albe to boot into 64-bit but GMA950 was not detected & i got only one resolution.

If u can help me in this matter, i will be very greatful to you.

[st_7]

Everything Solved

[Ianxxx]

Might be an idea to post the solution for other people.

[KaLPo]

Hi there.

I am just trying to install Snow Leopard and I have got the same problem described above, more or less. I attach a picture of my screen --> http://img52.imageshack.us/img52/3785/dsc02979h.jpg

I followed the guid by lifehacker http://lifehacker.com/5351485/how-to-build-a-hackintosh-with-snow-leopard-start-to-finish and it apparently worked for my laptop but when I try to install it in my desktop it just gives me a panic kernel death screen. :S

Any clue?

[jaxdvd]

I am having The issue of the ACPIPLATFORM Kernel panic and would really love some help fixing the issue... Have been looking through forums for a few hours now with no working fix yet..... It happened to me after updating my hackintosh from 10.6.3 to 10.6.6..... Thanks for any help at all...Is greatly appreciated!!

[kamalkkk987]

Hi, I am just just two noticeable problems from building a perfect snow hackintosh for myself.

Firstly, I am having problems with kernel panic generated by "com.apple.driver.AppleACPIPlatform(1.3)", after much experimentation i found out that the GMA950 hack in my modified dsdt that causing the 'AppleACPIPlatform' kernel panic. I have modified my dsdt for snow leopard using DSDTSE v1.3.3, the dsdt was modified successfully with 0 errors, 0 warnings. But the 'GMA950' hack in the modified dsdt gives "com.apple.driver.AppleACPIPlatform(1.3)" kernel panic when i try to boot snow leopard in 64-bit mode only, no such problems in 32-bit mode. If i remove the 'GMA950' hack(leaving other hacks same as it is) in my modified dsdt, i am able to boot into snow leopard in 64-bit mode. I guess this may be because the 'GMA950' kexts in SL 10.6.0 are 32-bit only(i have read this on the internet), so yesterday i updated to 10.6.2 as i read that it includes 64-bit kexts for GMA950. But the problem still persists. But if i remove the 'GMA950' hack from dsdt, i am only getting only one resolution(both in 32-bit & 64-bit) & sleep is not working. If some one knows the fix for this problem or any 'GMA950' kexts for 64-bit, please let me know.

And this is the kernel panic I am getting when I try to boot into snow leopard in 64-bit mode with 'GMA950' hack in dsdt.



Secondly, a distorted or blurry sound after waking up from sleep. The sound works quite good with vodoohda put in S/L/E, but after waking up from sleep a blurry or distorted sound comes even for the regular system sounds(deleting files, emptying trash). Can u please tell me how to fix this?.

I hope i get some suggestions from the members.

My system specs are: Intel Core2Duo 2Ghz, Intel 945GCNL motheroard with Onboard GMA 950 graphics, onboard realtek HDA(alc888 codec), onboard realtek 8111/8168 family ethernet, 1.5 GB DDR2 RAM, two 160 GB SATA HDD, One LG IDE DVD RAM drive.





i have same general protection error while installing with jass dvd
my configuration is
intel core i3-380M 2.53GHz ATI radeon 512MB how to solve it

[richdurhm]

So wait how was this solved???