=)(=
12-27-2009, 12:44 AM
Guide LG R405-A.CPSTV > SL X32
This Guide will work on other LG R405-A but maybe u will need different kexts if you have different hardware.
Hardware:
Model: LGR40
Config: LG R405-A.CPSTV
Mainboard: LG Electronics Inc. Lhotse-II
Chipset: South Bridge = ATIXpress 1250 (RS600)
Chipset: North Bridge = ATI SB600
Processor: Intel Pentium T2330 @ 1600 MHz
Physical Memory: 2048 MB (2 x 1024 DDR2-SDRAM )
Audio Card: Realtek HD - ALC262
Video Card: ATI Radeon Xpress 1250
Hard Disk: Hitachi (160 GB)
DVD-Rom Drive: HL-DT-ST DVDRAM GSA-T20N
Monitor Type: LGPhilipsLCD - 14 inches
Network Card: Marvel Yukon 88E8039 PCIe
Network Card: Atheros AR5007 802.11a/b/g
First download this Package (http://www.mediafire.com/download.php?23lnnztimmz) i made and move it to an ext HDD or burn on CD. (90MB - SL Extensions Backup Included, Hence the Size)
Download:
http://prasys.co.cc/wp-content/uploads/2009/10/Darth-Vader-256x256.png
Empire EFI V1.07R2 (http://www.mediafire.com/?nwoelzjym44)
Burn it on a cd.
Boot your pc with the cd in the drive.
When you see Darth Vader, eject Empire EFI cd and insert SL RETAIL DVD.
Wait few seconds and press F5 and you should be in the installer after few minutes.
After OSX Install has loaded:
-
Choose language and click on the arrow.
Click on Utilities on the tool bar, then select Disk Utilities.
On the left you should see your hard drive.
If not, a disk is not connected or cannot be read by your computer.
After selecting your hard drive click on Partition.
Under Volume Scheme, click current and select 1 partition.
Under Volume Information, name your hard drive.
Format: Free Space
Click Apply
Click Partition
After selecting your hard drive click on Partition.
Under Volume Scheme, click current and select 1 partition.
Under Volume Information, name your hard drive.
Format: Mac OS Extended (Journaled)
At the bottom of the window Click on the Options Button.
Select the GUID Partition Table
Click OK
Click Apply
Click Partition
Quit Disk Utilities
Click on the HDD you want to install OSX to.
Select customize, deselect printers and languages from the list.
Install OSX.
Restart.
-
Use Empire EFI cd and boot into OSX HDD.
When you are in OSX, extract and mount my package.
Install Chameleon:
_
Extract / Mount my Package.
Go to folder Chameleon.
Extract Chameleon Installer.
Install chameleon package but don't press restart.
Extract / Mount "Extra.dmg" from Chameleon folder.
Copy the Extra folder and go to the root of your HDD.
Paste the Extra folder there [Replace existing Extra folder]
_
Restart.
Boot with arch=i386 -v
Install Kexts:
_
Copy the kexts from the folders Ethernet, Graphics & Sound in my package into S/L/E.
_
Use Terminal to repair permissions.
sudo chmod -R 755 /System/Library/Extensions
sudo chown -R 0:0 /System/Library/Extensions
sudo kextcache -v 1 -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions/
After restart you should have it working , also you should have native resolution but no QE/CI!
Hardware:
Sound - Kinda Works
Ethernet - Works
Wifi - Does not work
GFX - Works partial, no QE/CI
Touchpad/Keyboard - Works
Built in Webcam - Not Tested
SD card reader - Not Tested
Sleep - Not Tested
Time Machine - Not Tested
Notes:
Sound - With VodooHDA you will have crappy sound that will turn into normal as long as you move the mouse, i tried to convert Leo AppleHDA to SL but did not work, probably needs DSDT patching and i'm not good at that.
GFX - Card not supported so you will have no QE/CI, but you will have native resolution thanks to the patched RadeonHD.kext
Wifi - AR5007 will get recognized but will say HAL Status 13, it is because it shares same id's with AR5006 which is supported and will try to load drivers for it but will fail.
Webcam- Recognized as USB webcam in profiler but i dunno if works.
When booting to x64 mode AppleATIATA will not load so it will get stuck there.
Tip:
* Buy an D-Link DWL-G122 USB Wifi Adapter (~30$) which works using Ralink Drivers for SL or D-Link drivers for Leo.
* Buy an EDIMAX EW-7711UTn USB Wifi Adapter (~30$) which works using Ralink Drivers for SL.
* I have included drivers for both in the package.
For permanent x32 mode:
Edit com.apple.boot.plist
Add:
<key>Kernel Flags</key>
<string>arch=i386 -v</string>
Have fun :)
This Guide will work on other LG R405-A but maybe u will need different kexts if you have different hardware.
Hardware:
Model: LGR40
Config: LG R405-A.CPSTV
Mainboard: LG Electronics Inc. Lhotse-II
Chipset: South Bridge = ATIXpress 1250 (RS600)
Chipset: North Bridge = ATI SB600
Processor: Intel Pentium T2330 @ 1600 MHz
Physical Memory: 2048 MB (2 x 1024 DDR2-SDRAM )
Audio Card: Realtek HD - ALC262
Video Card: ATI Radeon Xpress 1250
Hard Disk: Hitachi (160 GB)
DVD-Rom Drive: HL-DT-ST DVDRAM GSA-T20N
Monitor Type: LGPhilipsLCD - 14 inches
Network Card: Marvel Yukon 88E8039 PCIe
Network Card: Atheros AR5007 802.11a/b/g
First download this Package (http://www.mediafire.com/download.php?23lnnztimmz) i made and move it to an ext HDD or burn on CD. (90MB - SL Extensions Backup Included, Hence the Size)
Download:
http://prasys.co.cc/wp-content/uploads/2009/10/Darth-Vader-256x256.png
Empire EFI V1.07R2 (http://www.mediafire.com/?nwoelzjym44)
Burn it on a cd.
Boot your pc with the cd in the drive.
When you see Darth Vader, eject Empire EFI cd and insert SL RETAIL DVD.
Wait few seconds and press F5 and you should be in the installer after few minutes.
After OSX Install has loaded:
-
Choose language and click on the arrow.
Click on Utilities on the tool bar, then select Disk Utilities.
On the left you should see your hard drive.
If not, a disk is not connected or cannot be read by your computer.
After selecting your hard drive click on Partition.
Under Volume Scheme, click current and select 1 partition.
Under Volume Information, name your hard drive.
Format: Free Space
Click Apply
Click Partition
After selecting your hard drive click on Partition.
Under Volume Scheme, click current and select 1 partition.
Under Volume Information, name your hard drive.
Format: Mac OS Extended (Journaled)
At the bottom of the window Click on the Options Button.
Select the GUID Partition Table
Click OK
Click Apply
Click Partition
Quit Disk Utilities
Click on the HDD you want to install OSX to.
Select customize, deselect printers and languages from the list.
Install OSX.
Restart.
-
Use Empire EFI cd and boot into OSX HDD.
When you are in OSX, extract and mount my package.
Install Chameleon:
_
Extract / Mount my Package.
Go to folder Chameleon.
Extract Chameleon Installer.
Install chameleon package but don't press restart.
Extract / Mount "Extra.dmg" from Chameleon folder.
Copy the Extra folder and go to the root of your HDD.
Paste the Extra folder there [Replace existing Extra folder]
_
Restart.
Boot with arch=i386 -v
Install Kexts:
_
Copy the kexts from the folders Ethernet, Graphics & Sound in my package into S/L/E.
_
Use Terminal to repair permissions.
sudo chmod -R 755 /System/Library/Extensions
sudo chown -R 0:0 /System/Library/Extensions
sudo kextcache -v 1 -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions/
After restart you should have it working , also you should have native resolution but no QE/CI!
Hardware:
Sound - Kinda Works
Ethernet - Works
Wifi - Does not work
GFX - Works partial, no QE/CI
Touchpad/Keyboard - Works
Built in Webcam - Not Tested
SD card reader - Not Tested
Sleep - Not Tested
Time Machine - Not Tested
Notes:
Sound - With VodooHDA you will have crappy sound that will turn into normal as long as you move the mouse, i tried to convert Leo AppleHDA to SL but did not work, probably needs DSDT patching and i'm not good at that.
GFX - Card not supported so you will have no QE/CI, but you will have native resolution thanks to the patched RadeonHD.kext
Wifi - AR5007 will get recognized but will say HAL Status 13, it is because it shares same id's with AR5006 which is supported and will try to load drivers for it but will fail.
Webcam- Recognized as USB webcam in profiler but i dunno if works.
When booting to x64 mode AppleATIATA will not load so it will get stuck there.
Tip:
* Buy an D-Link DWL-G122 USB Wifi Adapter (~30$) which works using Ralink Drivers for SL or D-Link drivers for Leo.
* Buy an EDIMAX EW-7711UTn USB Wifi Adapter (~30$) which works using Ralink Drivers for SL.
* I have included drivers for both in the package.
For permanent x32 mode:
Edit com.apple.boot.plist
Add:
<key>Kernel Flags</key>
<string>arch=i386 -v</string>
Have fun :)