Mac OS X for PC 10.6.2 x64 Edition (x32 compatible)

[Gurqn]

Hello Mates there is a new release with amd support i think first good release for universal
║
║ •Torrent Size: 6.01 GB ║
║ →SnowOSXUniFlash1.0.img 6.00 GB ║
║ USB Image Tool.lnk 1.27 KB ║
║ usbit.zip 225 KB ║
║ USB ItUSB Image tool.exe 4.00 KB ║
║ USB Itusbit32.dll 4.00 KB ║
║ USB Itusbitcmd.exe 4.00 KB ║
║ USB ItUSB Image Tool.exe 134 KB ║
║ USB Itusbit32.txt 3.32 KB ║

║
║ •Mac OS X Snow Leopard 10.6.2 ║
║ →Has all the features of the original ║
║ →Ability to update if they come out UNLESS OTHERWISE WARNED! ║
║ •System Requirments ║
║ →1GB DDR2 RAM (2GB for x64) ║
║ →1024x768 monitor/compatible graphics card ║
║ →8 GB Disk space (HFS+ format [able to do in installer]) ║
║ →USB 2.0 Bus ║
║ →AirPort (for wireless internet, only if desired) ║
║ →1 GHz AMD or Intel Proccessor with instruction sets SSE2 and/or PPF ║
║ ║


║
║ •Questions or comments ║
║ →Contact me at cclloyd9786 @ gmailcom ║
║ →Leave a comment regarding installation failures and successes, or with ║
║ questions that I will reply to, or others if they can help. ║
║ Instructional Video: ║
║ video code dEE84N-mFCI ║ ║ ║
║ ║
║ •Dual boot with Vista/7 (Can't dual boot with XP or older. Google instructions ║
║ for linux. ║
║ →With installing mac first: ║
║ »Boot up to the installer (or to your mac if you have another version install-║
║ ed) and open Disk Utility under Utilities. ║
║ »Create a new partition if you plan on installing it on the same drive, and ║
║ format it to HFS+ (Mac OS X Extended (Journaled)). (Also do with full drive ║
║ if you plan on installing OS X only on the drive) ║
║ »Then if you need to apply the DSDT patch in the installation (you will see ║
║ as you go) ║
║ »Install OS X. MAKE SURE YOU CHOOSE CUSTOMIZE BEFORE THE INSTALL! ║
║ »If you installed the bootloader that is by defualt chosen during the install ║
║ then you do not need to do the dual boot steps of Windows. ║
║ »Now after you have it installed and everything, boot into Windows, and ║
║ install as normal. (If you cant boot into your mac, then use Windows Disk- ║
║ part to set your mad partition or drive as active. ║
║ →With Windows installed first: ║
║ »Create a partition in Windows at least 8GB in size and set it to active ║
║ »Use USBit to make your USB the installer. ║
║ »Boot into your USB and open disk utility. Format your mac partition to HFS+ ║
║ »Apply the DSDT patch if neccessary. ║
║ »Go through the install REMEMBERING TO CUSTOMIZE YOUR INSTALLATION. ║
║ »After installed, and have your OSx86 setup, open disk utulity again and set ║
║ the Windows partition to active (If you Don't want to use the Mac bootloader ║
║ which i suggest you use) ║
║ »After booting into Windows, download and install EasyBCD (Google is your ║
║ friend) and add a new entry. ║
║ »Choose 'Generic x86 PC' for the mac and DONT CHANGE THE NAME ║
║ »Then save changes. Now when you boot up, it will let you choose which to ║
║ boot into. ║
║ →If you don't understand anything, google it or ask me. Or go to OSx86.com. ║
║ THEY ALSO HAVE A FULL LIST OF COMPLETELY COMPATIBLE HARDWARE! ║
║ •If you cant boot because you have a x32 PC, then use the bootflags ║
║ -v -x32 ║
║ If you load a few kernals then your screen flashes white and goes black use ║
║ voodoo -v -x32 ║
║ ║
╚═════════════════════════


Already found on arenabg and nice download speed.

Edit:

Video Tutorial

Youtube dEE84N-mFCI

Enjoy mates :)

[Gurqn]

Here is my system specs

Tested Worked for me

AMD X2 550 @3.2Ghz @X4
4GB Ram DDR3 Ram
Sapphire Ati Radeon 4670 1Gb Version
Asus M4A78T-E Mobo (790GX Chipset with SB750)
Raptor 74GB Sata HDD

While in Windows you could use transmac for write downloaded img to disk and I just used my usb hdd for installation

Use transmac and write img to usb hdd or usb flash drive than boot it from there i mean select from bios than bootloader will appear and other process same as dvd for install

There is a folder called AMD Fix in img you could put your kext there for auto installation while installing from img.

While you boot img you could you this flags

voodoo -v -x32 cpus=x(depends your) fsb=200000000 (for my pheneom) busratio=x(depends your) maxmem=4096

Than you will see installer :D

You could select in installer the following tweaks

AmdFix(will put Amd_kernel to your root when installation finish)
EvoEnabler(for ati cards btw its worked for me just detected my vga like a 4890 but its oke really awesome using without dongle on vga port and all rezs working correct)
I didnt touch preselected tweaks.

I am using pci network card

D-Link DFE-530TX (used viarhine from ideneb 10.5.8 dvd and working without problem)

Used marvin utility to patch cpuids.

Everything seems fine now really good just waiting for on the fly patching cpuid support now with new kernel(i hope soon).

[blackknight]

Here is my system specs

Tested Worked for me

AMD X2 550 @3.2Ghz @X4
4GB Ram DDR3 Ram
Sapphire Ati Radeon 4670 1Gb Version
Asus M4A78T-E Mobo (790GX Chipset with SB750)
Raptor 74GB Sata HDD

While in Windows you could use transmac for write downloaded img to disk and I just used my usb hdd for installation

Use transmac and write img to usb hdd or usb flash drive than boot it from there i mean select from bios than bootloader will appear and other process same as dvd for install

There is a folder called AMD Fix in img you could put your kext there for auto installation while installing from img.

While you boot img you could you this flags

voodoo -v -x32 cpus=x(depends your) fsb=200000000 (for my pheneom) busratio=x(depends your) maxmem=4096

Than you will see installer

You could select in installer the following tweaks

AmdFix(will put Amd_kernel to your root when installation finish)
EvoEnabler(for ati cards btw its worked for me just detected my vga like a 4890 but its oke really awesome using without dongle on vga port and all rezs working correct)
I didnt touch preselected tweaks.

I am using pci network card

D-Link DFE-530TX (used viarhine from ideneb 10.5.8 dvd and working without problem)

Used marvin utility to patch cpuids.

Everything seems fine now really good just waiting for on the fly patching cpuid support now with new kernel(i hope soon).

Hey, you should check out my modified AnV kernel with corrected Phenom FSB detection. It will eliminate the need to use FSB=200000000. It basically doubles the detected FSB so that you can still overclock. Here's the link: http://www.infinitemac.com/f36/anv-qoopz-voodoo-based-kernel-with-corrected-phenom-t5112/

[alfaromeo303]

I've recently downloaded and installed this release on my notebook, it is great for doing a base install! After installation you can easily fine tune it with the kexts for your system! My 8930g is working really good and stable on 64bit. For the wifi i'm using the Dell 1490 mini pcie card which works out of the box!

[EdeBoi]

would it work on my system?
if yes, which selections of kexts?

http://www.infinitemac.com/f4/how-to-upgrade-to-snowleopard-t4927/

[Gurqn]

Hey, you should check out my modified AnV kernel with corrected Phenom FSB detection. It will eliminate the need to use FSB=200000000. It basically doubles the detected FSB so that you can still overclock. Here's the link: http://www.infinitemac.com/f36/anv-qoopz-voodoo-based-kernel-with-corrected-phenom-t5112/

Oh thanks i will try that , but without auto cpuid patch really hard to use osx on amd :) why voodoo team delayed to release new kernel dunno i think lack of man power ? Auto cpuid patch is most important part for amd ,i hope they could return back :)

[Gurqn]

would it work on my system?
if yes, which selections of kexts?

http://www.infinitemac.com/f4/how-to-upgrade-to-snowleopard-t4927/


If you can provide hardware specs than peoples can try to help you on kext selections.

[ninuola]

Can this setup be installed on a macbook? I got the setup from a friend to install on my macbook but don't know how to go about it. Please help me out.
It might seem easy to u guyz for me to just get a normal setup and install it on my macbook, but trust me, it isn't. Not with my current location.
thanks in advance.

[spalek83]

Can this setup be installed on a macbook? I got the setup from a friend to install on my macbook but don't know how to go about it. Please help me out.
It might seem easy to u guyz for me to just get a normal setup and install it on my macbook, but trust me, it isn't. Not with my current location.
thanks in advance.
use MAJOR caution with any of the boot loaders/distros on real your macbook, they could very well break it. I would say def don't do it, but as I once used something to install an early version of OS X on a old as hell imac that was only meant to run classic, I should probably just give a word of caution

a real macbook dosn't need a distro, so why would you ever do it?

[techblow]

would this work on my sony vaio vpceb14en
if yes wat kexts and where to obtain

specifications
intel core i3 processor
intel hm55 express chipset
3 gb ram
ati raedon HD 5470 graphics
intel high definition audio (uses the realtek high definition audio drivers)