[Solved] Kernel Panic on Fresh SL install

[Y@$$ER LOTFY]

Hello all,
i have installed Snow Leopard retail on my MBR HDD and Successfully installed.
Then Installed Chameleon Boot 2 RC4 (Only one worked with me).
Then Copied the Main Kexts to New Installed Snow Leopard HDD Extensions dir. (Following This Guide (http://osx86.net/f57/how-to-install-snow-leopard-on-a-pc-t3137/))
and made the dsdt.aml thing as well :)

Then i rebooted to my new installed SL
and i have a kernel panic

this the main txt which would help you to help me :D:-
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOATAFamily(2.5.0)@0xffffff7f807dd fff->0xffffff7f807ddfff

BSD Process......: kernel_task

and this is the images if it would help:
http://img718.imageshack.us/img718/8334/img0184c.jpg (http://img718.imageshack.us/i/img0184c.jpg/)

And my PC spec:-
Mother Board: MSI 975x Platinum Power Up Edition.
CPU: Intel Core 2 Due 1.8GHz.
Memory: 3 x 1GB DDR2 Rams (3GB Ram).
GPU: Gigabyte nVidia 9600 GT 1GB GDDR3 Ram.
HD: WD Caviar 320GB (MBR Table).

I Hope you help me fast please,
and by the way i didn't install any Driver Kext for my spec ;)

Thanks in advanced

[Y@$$ER LOTFY]

OMG
No one here can help me :(

[duk]

Hi all,
I installed SL Hazard successfully on intel core2duo,but could not boot after restart.It gives a error "Kernal mismatch with cpu".
what might be the problem ? how would i boot .please help!.

Thanks in Advance
My spec
intel(R)core(TM)2duo E7400 @2.79GHZ,
Motherboard :dg35ec,

[Y@$$ER LOTFY]

lol
no one will help us now i think
all are busy dude

good luck for you n me

[scififan68]

@Y@$$ER LOTFY There's an easy solution for your problem! What you need to get the patched ioatafamily.kext (http://www.insanelymac.com/forum/index.php?showtopic=186609) replace the original ioatafamily.kext in /S/L/E.

@ duk http://www.insanelymac.com/forum/index.php?showtopic=213619

[Y@$$ER LOTFY]

@Y@$$ER LOTFY There's an easy solution for your problem! What you need to get the patched ioatafamily.kext (http://www.insanelymac.com/forum/index.php?showtopic=186609) replace the original ioatafamily.kext in /S/L/E.

@ duk http://www.insanelymac.com/forum/index.php?showtopic=213619

Thanks bro for replying..
but i have fixed it from awhile and u r right it was from IOATAFamily kext.

but i have now 3 problems:-
==================
1- How to fix about this mac in Snow Leopard.
2- How to make NTFS-3G Working on Snow Leopard.
3- Can i update to 10.6.3 safely.

Thanks again dude and Thanks in advanced.:)

[scififan68]

1- How to fix about this mac in Snow Leopard.
look here (http://www.insanelymac.com/forum/index.php?showtopic=108606) install to /S/L/E use the vanilla applesmbios.kext from snow leopard and you may have to boot with arch=i386.

2- How to make NTFS-3G Working on Snow Leopard.
It already does work :D

3- Can i update to 10.6.3 safely.
Yep! You have a Core 2 Duo!

[Y@$$ER LOTFY]

OK now Only 2 Problems (1 Fixed):-
=======================
1- How to fix about this mac in Snow Leopard.
2- Can i update to 10.6.3 safely.

Fixed One:-
========
1- Mount (Read/Write) NTFS Partition by "NTFS Mounter 0.3".

I Tried to download and run "About this mac" Fix but still not working
when i open about this mac the screen goes Blue then come back to Desktop with fresh fast restart i think

[Y@$$ER LOTFY]

1- How to fix about this mac in Snow Leopard.
look here (http://www.insanelymac.com/forum/index.php?showtopic=108606) install to /S/L/E use the vanilla applesmbios.kext from snow leopard and you may have to boot with arch=i386.

2- How to make NTFS-3G Working on Snow Leopard.
It already does work :D

3- Can i update to 10.6.3 safely.
Yep! You have a Core 2 Duo!

lol, You always reply while i'm replying dude ;)
OK i already fixed the No.2 Problem

Thanks for Info about No.3 Problem

for No.1 Problem:-
============
I Already running with Vanilla Kernel and System Profiler Works Good and Every thing is working good
i don't know why the screen goes blue when i click on (About this mac).

[Y@$$ER LOTFY]

Oh Thanks a lot Dude,
About This Mac Now Working good

but this could be error in System Profiler:-
===========================
Hardware Overview:

Model Name: Mac
Model Identifier: 1.0
Processor Name: Intel Core 2 Duo
Processor Speed: 1.81 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 3 GB
Bus Speed: 100 MHz
SMC Version (system): 1.30f3
Hardware UUID: 00000000-0000-1000-8000-0016174EE065

------------------------------------------------------

Memory:

No information found.
==========================================

And Before About This Mac Fix it was Bus 800, and in Memory tab there is was my 3 Rams with it's status.
how to fix this plz ?

[scififan68]

That's just a cosmetic issue. Download the attachment and out it into /Extra and if there is no extra folder create one on the root of your snow leopard partition.

[Y@$$ER LOTFY]

OK Bro, Thanks
But in "Extra/Extensions" or "Extra/" ?
and do i must restore the OLD SMBIOS to the S/L/E Dir ?

[Y@$$ER LOTFY]

That's just a cosmetic issue. Download the attachment and out it into /Extra and if there is no extra folder create one on the root of your snow leopard partition.

I Tried as you said,
but still the same problem
(i put the plist file in me "/Extra/" Dir.
Then restarted

[scififan68]

That's the right place for it. but if you want the memory info then I'd remove applesmbiosefi but then about this mac wont work, and the problems you are having are purely cosmetic and wont effect performance or functionality, you do know that right?

[Y@$$ER LOTFY]

So the 100 MHz isn't Real ?
if it isn't so no problem it's Awesome.

Thanks dude, but i love to be every thing good (you know) :D.

Thank you again bro for your help.