[Discuss] Update 10.6.4 Safety !!!!

[Y@$$ER LOTFY]

http://modmyi.com/images/10.6.4.png

It's been only 3 months since our last update for OS X Snow Leopard. Since this release, Apple has worked on a number of fixes, more than you can even keep count of. Although I never really had any problems with the last release, it appears there were plenty of problems that needed correcting.


Is it safe to update on our hackintoshs?
Or what to do please

I have downloaded it yesterday and ready to update.....

[Y@$$ER LOTFY]

I have updated it successfully
and copied this Kexts to Extensions:-
========================
AppleSMBIOS.kext
IOATAFamily.kext
========================

And i have rebooted and it works perfectly.

Good Luck all :cool:

[Imkantus]

You are still using hardcoded AppleSMBIOS? What's the issue with using the Vanilla kext?

[Rapidas]

Update my G31M-ES2L rev 2.0 10.6.3 to 10.6.4 (using combo update) and got kernel panic, something about SleepEnabler

http://i45.tinypic.com/2ahrz2u.jpg
http://i45.tinypic.com/52kihf.jpg

sorry for low quality.

*******Fixed****
Booted OSX 10.6 Retail DVD with Empire-EFI, mounted my hackintosh system partition, removed file SleepEnabler.kext from
/Extra/Extensions/

[Y@$$ER LOTFY]

You are still using hardcoded AppleSMBIOS? What's the issue with using the Vanilla kext?

Cause About This Mac doesn't work unless i changed the SMBOIS Kext

[Y@$$ER LOTFY]

Update my G31M-ES2L rev 2.0 10.6.3 to 10.6.4 (using combo update) and got kernel panic, something about SleepEnabler

http://i45.tinypic.com/2ahrz2u.jpg
http://i45.tinypic.com/52kihf.jpg

sorry for low quality.

*******Fixed****
Booted OSX 10.6 Retail DVD with Empire-EFI, mounted my hackintosh system partition, removed file SleepEnabler.kext from
/Extra/Extensions/

Nice Bro Gratz For Fixing i don't have this problem

[ador]

I have updated it successfully
and copied this Kexts to Extensions:-
========================
AppleSMBIOS.kext
IOATAFamily.kext
========================

And i have rebooted and it works perfectly.

Good Luck all :cool:

do you mean you use the old kext from 10.6.3 and put it back again to S/L/E?
right after you update to 10.6.4?

[dvtwru]

My mac http://img534.imageshack.us/img534/5538/fsdlfasff.png (http://img534.imageshack.us/i/fsdlfasff.png/)

detail please visit home page
if update from 10.6, download the update10.6.4 combo, about 800Mb
if update from 10.6.3 download the update normal about 600mb

[jamesst20]

Hi, i did it without any patch. I used Apple Software Update and updated my Snow Leopard 10.6.2 to 10.6.4. At reboot i got a kernel panic (SleepEnabler) but i rebooted in -s and typed this:

mount -uw /
cd System/Library/Extensions
rm -rf SleepEnabler.kext
reboot

and it worked fine!

My Kernel is: The original one from Apple. I'm not using a patched one ;)

[toanbk]

hi pro,, after update my mac shutdow error, please help, thx a lot, :d

[SportsGuy]

Update my G31M-ES2L rev 2.0 10.6.3 to 10.6.4 (using combo update) and got kernel panic, something about SleepEnabler

http://i45.tinypic.com/2ahrz2u.jpg
http://i45.tinypic.com/52kihf.jpg

sorry for low quality.

*******Fixed****
Booted OSX 10.6 Retail DVD with Empire-EFI, mounted my hackintosh system partition, removed file SleepEnabler.kext from
/Extra/Extensions/


I got a kernel panic...
so I can't go into safety mode (-s), but if I can install mac on a flash drive (I have done before) and remove SleepEnabler, I'll be fine?

[iGot]

Hi, i dont have the mic ( audio input ) working...
can you please share de .kext ? :D

ASUS P5KPL-AM - bios 502
Core 2 Quadr Q8400
NVIDIA GeForce 7300GS 256mb

[SportsGuy]

google voodoohda.kext

[iGot]

google voodoohda.kext

Hi,
As can you imagine, i search BEFORE ask to share THIS .kext file, because all 4 different versions that i download doesnt work.

But is ok, thank you for nothing.

[cheapshot]

I'm really stuck on this guys and I was wondering if you could help me out. I have no experience using the terminal.

So, i have the kernal panic issue with the sleepenabler. it wont boot into verbose or single user mode, but it will obviously boot from the installation DVD.

Is there a guide available which will show me how to mount my drive, and disable the sleepenabler? If not, is there any chance that one of you would be kind enough to give me a quick step by step? I would really appreciate it.

thanks in advance

cheaps

[SportsGuy]

I'm really stuck on this guys and I was wondering if you could help me out. I have no experience using the terminal.

So, i have the kernal panic issue with the sleepenabler. it wont boot into verbose or single user mode, but it will obviously boot from the installation DVD.

Is there a guide available which will show me how to mount my drive, and disable the sleepenabler? If not, is there any chance that one of you would be kind enough to give me a quick step by step? I would really appreciate it.

thanks in advance

cheaps

What I did was download the MacDrive demo, then just delete the kext from sys/lib/ext

Hope this helps!

[TheTony]

I updated successfully taking caution to remove the sleep enabler kext (that didn't work anyway) and everything still works fine and dandy except for my GMA X4500 graphics crad that used to work on 10.6.2.

[cheapshot]

What I did was download the MacDrive demo, then just delete the kext from sys/lib/ext

Hope this helps!

Hi there. Thanks for your fast reply. Unfortunately, I am not dual booting my system, so I can't log into windows and then access the mac drive from another operating system.

All I have is access to terminal (after booting up from the install DVD), and as I mentioned, I am not proficient in using the terminal at all...

If anyone could help me I would be most grateful.

[SportsGuy]

I'm not the best at terminal either... Maybe try this??:

mount -uw /
rm -rf /System/Library/Extensions/****.kext

[spoon2eric]

All,

I've got a Gigabyte G31M-ES2L and I'm currently running 10.6.1. I've tried taking a few updates (10.6.2 and 10.6.4) "naturally" via Software Update, but I keep getting Kernel Panics. At this point I've tried removing the /Extra/Extensions/SleepEnabler.ktext file with no luck. Does anyone have an idea on why I get a panic without this .ktext? Even after I've removed the .ktext from the system, I get the same error?? Does the system still think I have the SleepEnabler.ktext in the /Extensions folders???

Also, I am using SuperDuper! to create a bootable clone of my MacOS before I test any updates... If I boot into my clone backup and then try to update, there is no going back... As in, the bootable drive now has the 10.6.X update and causes an immediate Kernel Panic causing me to trash the new clone and start all over... Does anyone have a better way of "testing" the Apple builds? Is it possible to recover via "-x" or safemode?
http://i46.tinypic.com/68sj78.jpg

What's Under the Hood:
Gigabyte G31M-ES2L
4 GB DDR2 SDRAM
nVidia GeForce 8600 GT
SONY DVD RW DRU-720A
AppleUSBUHCI
Apple Bluetooth Software Version: 2.2.3f8

[eacape]

Update my G31M-ES2L rev 2.0 10.6.3 to 10.6.4 (using combo update) and got kernel panic, something about SleepEnabler



*******Fixed****
Booted OSX 10.6 Retail DVD with Empire-EFI, mounted my hackintosh system partition, removed file SleepEnabler.kext from
/Extra/Extensions/


Same happened with me, but my SleepEnabler.kext was in /System/Library/Extensions/. Deleted it, and everything is OK

[naf456]

atleast you got a KP.
i was happily using 10.6.2 and i have spent weeks fine tuning it and everything, but i fought, i'll give updating ago. (never had luck with updating on tiger and Normal Leopard).
so i spent 3 hours downloading the update (slow Internet times)
and once it finally installed, i rebooted!
then again....then again,,,,then again.
Chameleon doesn't even try to load the partition. i tried to go into Verbose mode, by nothing loads (no code no nothing!). by this time, a through my keyboard out the window (it's half past 4 in the morning. and i start cursing.)

I don't know what the problem is, to not load the first bit of code?
anyway, i have installed the latest Chameleon 2 RC4 version, still no luck.
here my specs if they help:

Gigabyte GA-M61PME-S2 (Nforce 430 (Nvidia 6100))
Nvidia 9800GT
AMD 2.7 GHz athlon Black edition.

i'm using the Legacy kernel by the way. ;D

[Imkantus]

i'm using the Legacy kernel by the way. ;D
Your problem description sounds exactly like you don't.

You are sure you made a Kernel-back-up before Update and restored the patched one before reboot?

[ptesone]

I did a fresh install (retail .mpkg way from ihackintosh.com) of snow leopard 10.6 and then installed MacOSXUpdCombo10.6.4.dmg update and it KP'd during "writing receipts" and I thought all was lost. . .

I then rebooted once which then rebooted by itself to finish updating and low and behold, it started up. . .

I then installed legacy_kernel-10.4.0.pkg which replaced the old modbin mach_kernel.test7 kernel and had to use an older IOUSBFamily.kext

all is well. . .so far

[Y@$$ER LOTFY]

WooooooooW
I didn't see my post from a while :)
Good Luck all Using 10.6.4

I Think i have problems with (About this mac "Crash").........
I'm Trying fixing it right now

[safmaverick]

Hi, I've installed 10.6.4 Combo update but after restart I got this screen and everything stops. Tried verbose to see what is the problem but nothing happened. I think it's a kernel problem. I've backuped kernel via OSxTools and saved it before update, but how to take it back to where it should be?

http://i279.photobucket.com/albums/kk159/safmaverick/Image012.jpg

[retrosoul]

hi i was wondering what kext i should use for my onboard nvidia geforce 7100 i have yet to get anything more then 1024x768 and my monitor can handle 1680x1050 once i get my sound and video working then ill attempt the update right now im using 10.6.0 using the empire efi (the only thing that works on my pc)

thanks

chris