7600GS 512MB PCI-E @ iPC 10.5.6

Update

Update:
OK, i figured out that nothing works with 10.5.6! Really nothing! But NVinject is great solution for 10.5.2 so what changed between 10.5.2 and 10.5.6? I'm really interested in it! As you can see i'm dummy in this. So if there is someone, who can explain it, i will be thankful.

ok, but

yeah i read that topic as very first in this forum but i have PCI-E not AGP so i want solution for PCI-E but you inspired me to try that method with my PCI-E...so i'm gonna try that and report results...

Nothing...

Update:
So i tried method in 7600GS 512MB AGP topic but nothing happened...I do it this way: install using 7600GS AGP package, boot into safe mode, put my id (0x039210de) in GeForce.kext, NVDANV40Hal.kext, NVDAResman.kext, NVinject.kext, reboot with -f ...and i get nothing but also with "No Kext Loaded" so in that package is not injector or what? i absolutely dnt understand this kext issues...i have no hope in this graphics card, i should buy some new...

OK bro, thx 4 reply but...i tried that kexts (from iPC) but there was different id...just remember, mine is PCI-E not AGP! When i use NVinject 0.2.1 from iPC i can get full resolution (1280x1024 for my monitor), with NVinject loaded properly, hardware ids are coresponding (in system profiler) so everything is fine but no QE/CI :'(. And using that 7600GS's kexts from iPC gives me nothing (no kext loaded)...Anyway i can try yours kexts and see what happends...maby should NVinect team make new injectors for 10.5.6 but i dnt know, if it's a problem in injectors...i'm really confused :.
But wait, wait...i just figured out, that all both of you have Voodoo kernel...and i'm always running it with Vanilla kernel...it can be the point of trouble...i'll give a try...

Worksss

gipo thanksssss! it workssssssss! yeeeeaaaaaaaaaa celebrate with meeee %-) i just put my ids in yours kexts and install using osx86tools...no big deal...and it works! aaaaa i am so happpyy! thx thx thx thx! PROBLEM SOLVED!

This worked for me.

@borbou: hmm, so i dnt know...maybe it were different kexts, maybe it were kexts from Hara Taiki...i dnt know...but there were different IDs
@albatross83: i have AppleSMBIOS-27rev3-800 too, im using vanilla kernel...

Here are my steps:
1. Be sure that your id is 0x039210de !
2. Install Leo without ANY video kexts/injectors...(i highly recommend iPC)
3. Install 0x039210de kexts using Uinstaller(dnt forget to select right hard drive )
4. Reboot (you can boot up with -f but for me it worked also without it)
5. Have fun with nice and smooth graphics!

Kexts: media fire.com/?dwyjivynkjd

@borbou3)installed the kexts downloaded from your link using Uinstaller (and deleted extensions cache using Osx86 tools)

No words about deleting cache in my steps! I tried it once and also could boot only in safe mode. Remember, i did it without flashing! But if it work for you then...

why don't you push the search button?

PNY GeForce 7600GS 512MB AGP →

Try to put this in...

rapid share.com/files/196355016/Kexts_nvidia_7600gs_256.zip

changing inside this kexts the present id with yours... i think the same than Hara's one... because mine is 256mb vram.
IMHO if you install 7600 kexts from ipc release must work for you...

i have the same card 7600gs 512 pci-e and im trying to get it fixed...

i downloaded gipos kexts but i found out that my device id is the same as in gipos kexts (0392) although my card is 512mb and not 256.

so i just installed them without changing anything…
well that didnt work. i can only boot in safe mode and qe/ci still not enabled...

any suggestions?

thanx in advance!

I'm trying to get my 512MB 7900 to work, so I figured I'd give this a shot.. Few questions:

1) Did you modify anything other than the ID strings? e.g., anything to denote the amount of RAM on the nvidia card?

2) Did you install a different kernel? (Like the Voodoo kernel you mentioned above?)

3) Did you install the AppleSMBIOS-27rev3-800 that was in the Zip file from Gipo?

Quick update.. I modified the kexts with my ID string, and installed them with OSX86Tools, along with the AppleSMBIOS-27rev3-800. OSX is booting up in full res, but still no CI/QE.. It is recognizing the 512MB, but that hasn't really been an issue for me with anything else either.

Graphics by NVIDIA:

Chipset Model: Graphics by NVIDIA
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0291
Revision ID: 0x00a1
ROM Revision: NVinject 0.2.1
Displays:
FHD2400:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Rotation: Supported
Display Connector:
Status: No display connected

1. Try to first remove all nvidia and geforce kext's from your machines System/Library/Extensions folder (restart). 2. Then use EFI studio to write your 7600 512mb to com.apple.boot.plist. 3. Finally, install the 9f23installer.pkg for the correct 10.5.6 kext's for your nvidia card (restart). You should be good to go.

This is what worked for my 8600 GT 256 card in iPC 10.5.6

If all else fails, reinstall iPC without selecting anything from "customize" for your video drivers (no kexts, nothing). Then continue from step 2. above

@Andrew180@borbou: hmm, so i dnt know...maybe it were different kexts, maybe it were kexts from Hara Taiki...i dnt know...but there were different IDs @albatross83: i have AppleSMBIOS-27rev3-800 too, im using vanilla kernel... Here are my steps: 1. Be sure that your id is 0x039210de ! 2. Install Leo without ANY video kexts/injectors...(i highly…

Update: I followed all the steps but still i can only boot in safe mode… and no ci/qe enabled...

1)sure is!
2)installed ipc 10.5.6 without any kexts/injectors
3)installed the kexts downloaded from your link using Uinstaller (and deleted extensions cache using Osx86 tools)
4)rebooted with -f
then im stuck to the black screen with the white cursor

when i boot in safe mode, thats what profiler sais:

any idea on that?
i'm using vodoo 9.5.0 kernel btw.

@handz1. Try to first remove all nvidia and geforce kext's from your machines System/Library/Extensions folder (restart). 2. Then use EFI studio to write your 7600 512mb to com.apple.boot.plist. 3. Finally, install the 9f23installer.pkg for the correct 10.5.6 kext's for your nvidia card (restart). You should be good to go. This is what…

OK did that too but same result...

1. Fresh install of ipc with no kexts for video
2. used EFI studio to write 7600gs 512mb to com.apple.boot.plist.
3. installed the 9f23installer.pkg

when booting i get the same black screen
and in safe mode, thats what profiler sais:

can you tell what all graphics kext it has loaded while in safe mode. You can get that in system profiler->loaded extensions.
Nagu

OK PROBLEM SOLVED

i had to flash my card using NVinject guide (nvinject.fr ee.fr/512Mb.html)

but everything now works fine with ci/qe enabled!