ASU 0.5 installed 10.5.3, but System Reboots instead.
Using ASU 0.5 and installing 10.5.3 directly, resulted in a Kernel Panic on my system. I can't gain access to the O/S from either ends (safe boot and normal boot). I can't even post a log now. As soon as 10.5.3 was installed in the ASU,…
- Primary Author
- @WinLinMac01 Published 2008-06-05
- Collection
- Leopard 10.5
- Archival Footprint
- 8,188 historical reads · 14 curated field notes (from 32 dispatches) · 2008-06-05 – 2008-06-08
- Credited Voices (6)
- @WinLinMac01 (18)@naquaada (7)@Puttabong (2)@zephyroth (2)@pαuℓzurrr. (2)@gipo
Using ASU 0.5 and installing 10.5.3 directly, resulted in a Kernel Panic on my system. I can't gain access to the O/S from either ends (safe boot and normal boot). I can't even post a log now. As soon as 10.5.3 was installed in the ASU, the message appeared, where I needed to restart my system. Any ideas? Thanks. My specifications are located in my user profile.
Specs are as follows-
Processor/CPU2.26 GHz AMD Athlon™ 64 Processor 3500+ Venice
MotherboardGigabyte Technology K8NXP-SLI---Nforce 4 SLI Chipset (Dual Power System)
Memory/RAM3 GB 400 MHz DDR SDRAM PC3200, 2xCorsair XMS (2 GB), 2xCrucial Ballistix (1024 MB)
Hard Drive(s)1 SATA2, 320GB, Western Digital, 16MB Cache
Other Device Info1 NU IDE/PATA DVD-RW, 16x, 1.44 MB NEC Floppy Drive
Video Card/GraphicsNVIDIA Geforce 6600GT 128MB PCI Express (2) / SLI-mode [QE/CI Enabled]
Audio InterfaceAC'97 8-Channel/16-bit
LAN Interface(s)NVIDIA/Marvell/Realtek
Keyboard/Mouse ComboLogitech LX700 Cordless Desktop
Monitor/DisplaySamsung SyncMaster 216BW Series
PrinterCanon PIXMA MP830 (Latest)
Router ConnectivityNetGear RangeMAX WPN824, Version 2.0
Operating Systems(1). Windows Vista x86 Ultimate [Retail], (2). Mac OSX Leopard 10.5.2 (Leo4All & Zephyroth), (3). Sabayon Linux 3.4F (Stable)
I also wanted to add-on that I was intalling this with the 9.2.2 kernel.
Attached is the picture of the error:
Author Updates & Technical Revisions
Follow-up dispatches by @WinLinMac01
No, I have not overclocked my processor. Its running at its normal clock speed.
EDIT- Puttabong, I'm going to upload a picture in a little while. =)
I gave it five minutes and below is what I ended up with:
Any idea now?
Yes the Extensions.mkext is rebuilt before I get that error. If you look at that image close enough IMG_2806, you will see the Kernel Panic I am receiving even in safe boot. I tried waiting for a response from the system for 5 minutes, and there was no progress after I received the panic. My CPU is not O/C'ed. Any idea?
I have not touched my hardware settings for over a month now. I checked the settings, and all appears fine. What is up with the Kernel Panic. Anyone else experienced this error after installing 10.5.3?
I'm going to go into Sabayon Linux where I can gain access to HFS+ partitions and manually remove the file from there. What do you think? Thanks. =)
I also installed MacDrive 7 in Windows just in case I cannot write files to the HFS+ Partition in Linux. =p
I can also remove that file through the single user mode as you told me Puttabong. =)
I'm going to do as you told me Puttabong first.
I deleted the kext that you told me to do so Puttabong, and I was finally able to avoid the Kernel Panic. However, now instead, my system reboots. Attached are the screenshots when I boot in Verbose mode (very interested because it looks like I am booting into safe boot, but I'm not).
Thanks for confirming that p-J. I can't seem to figure what the problem is. I booted into Verbose Mode and there is no error showing up. It just reboots in the very end, "syncing disks..." etc. Any ideas?
p-J, I just wanted to know,before you proceeded to updating did you select the "Modify Only" option. I did that and 52 files were successfully patched. What about yours?
Help would be appreciated now in regards to this. I don't find any error in the log I posted in the screenshot above.
I tried almost everything I can think off. Are there any more kexts I need to delete?
I did try to boot with -v -f -x
It probably did patch 47 files. I could be referring to something else.
Synthesized Community Field Notes
14 technical responses curated from 32 original dispatches
Hava you overclocked you CPU? I get this error if I push my CPU too hard.
Sorry WinLinMac, we need more details about the kernel panic! Could you make a picture of it?
@ WinLinMac01:
Rohitkpatil needs some help → with Leopard & Vista Dualboot, have you an idea?
Remove the AppleIntel... from /System/Library/Extensions .
As usual boot with -s.
?
Remove AppleIntelCPUPowerManagement.kext from /System/Library/Extensions.
Has this only something to do with Intel cpu temeperature system or does it handle Cool'nQuiet too? AMD cpus are very cool using OS X, they have less heat than Windows using Cool 'n'Quiet. Will it ever be possible to check the AMD hardware sensors (CPU temp, onboard fan) etc?
EDIT: I can o'clock my cpu again. On 10.5.2 the max wasn't possible than 2.52 GHz, Now I can use 2.64 GHz again
WinLinMac01: Is the Extensions.mkext rebuilt (large text scrolling up) before you get that error? If I push my machine to 225 MHz bus frequency I always get this, with 220 not.
Ever tried to reset the BIOS to defaults or take out the CMOS battery? We often got this error due to wrong BIOS settings, RAM modules may also be a problem. I also disable all unneccessary things in BIOS, so Floppy, Parallel port, Game port, Midi.
I only have it when I overclock my system too much. Try to take out the CMOS battery (disconnect power) and set the BIOS to default. Works often better as thought. BTW: I there maybe a BIOS update available for your board?
[cite] zephyroth:? Remove AppleIntelCPUPowerManagement.kext from /System/Library/Extensions.
Did you do this, WinLinMac?
Did you boot in single user mode & executed the following commands?
cd /System/Library/Extensions
rm -R AppleIntelCPUPowerManagement.kext
reboot
Puttabong, I don't have AppleIntelCPUPowerManagement.kext in my system. I presume it's a plugin inside AppleIOPlatform.kext or so, but I don't know exactly where.
BTW: Wanna join me and R0GUE in irc?
Having the exact same problem as you WinLinMac01, i deleted the kext using the leo4all dvd terminal, but now it just reboots my pc when i want to boot mac osx...
I didn't use the modify only button, but i saw that i didnt find any cpuids or something, found that allready strange.
I think i screwed the installation, im saving all the files i can now, and then im off reinstalling
Gotta learn from the mistakes uh
Why 52 files patched? normally must be (and i think it's the same for all of us)
47 of 47 visited files were successfully patched.
121 of 121 found patches were successfully applied.
i can't see your snapshot... i download a 1kb jpg file.
Where system hangs? After upgrade normally the problems afflicts graphic and sound, but if you cannot login even in safe mode it's very strange.
Tried to boot with -v -F -x?
On a notebook i got on work this string made me boot after kext's problems (audio probs)
Sure is it not a video issue? try to delete from macdrive all the video card kexts..
Sources & Contributor Provenance (6 credited usernames · Thread #1110)
| Username | Dossier Contribution | Dispatches | Active Window |
|---|---|---|---|
| @WinLinMac01 | Primary Author | 18 | 2008-06-05 → 2008-06-08 |
| @naquaada | Core Contributor | 7 | 2008-06-05 |
| @Puttabong | Contributor | 2 | 2008-06-05 |
| @zephyroth | Contributor | 2 | 2008-06-05 |
| @pαuℓzurrr. | Contributor | 2 | 2008-06-06 |
| @gipo | Contributor | 1 | 2008-06-08 |