ATI 2600 xt pcie & Snow Leopard Troubles

thanks

but does yours function fully because I am having problems playing video sound there no pic all black?

thanks folks! I am afraid we will all need to go hunt for a cheap nvidia card if we want all that qe and cl to work.

cheapest i could find was the best of the lower -price range nvidia cards from asus geforce en 9500 gt di gddr3 pci-e 512mb for 61 euros amozon it.

I have the same card.

Usign natit + evoenabler, deleted ATIRadeonx2000.kext and ATI2600controller.kext..

Only 1024*768 resolution, waiting for something new...

@icobut does yours function fully because I am having problems playing video sound there no pic all black?

I'm not tested yet.
I'll post my result

I have this video card too, which works fine in 10.5.8.

Maybe we should just buy a cheap GeForce 8600 GT from ebay? Or a 8800?

My MSI RX2600XT-T2D256EZ/D3 works without QE and CI, but I can change resolution. For example, now I have 1280x1024. I am using Natit (old, not silent). I deleted all ATI 2000 kext (otherwise i had just black screen). Need QE and CI.

I'm afraid I'm in the same boat. So what's the cheapest nVidia card that supports OpenCL and is compatible with Snow Leopard?

So, is this dead? Even though the iMacs with 2600 cards in them work fine with QE/CI in Snow Leopard, we are just giving up on the hackintosh end?

they have a different firmware
also see http://netkas.org/?p=182 ↗

and www.apple.com/macosx/specs.html

OpenCL requires one of the following graphics cards or graphics processors: * NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600 * ATI Radeon 4850, Radeon 4870

crossposting: http://www.insanelymac.com/forum/index.php?showtopic=18… ↗

I have a HD2400 PCI-e which doesn't have qe/ci under [edit]snowleo either, so I'm in the same boat. It will, however, play some video with Quicktime player, but since there's no hardware acceleration it uses the CPU and isn't nearly as smooth as 10.5.8. VLC won't play anything at all, oddly. I can't afford a new card, so I guess I'm stuck with 10.5.8 until/unless some genius (netkas?) comes up with a solution. ;(

@max22they have a different firmware also see http://netkas.org/?p=182 ↗ and www.apple.com/macosx/specs.html crossposting: http://www.insanelymac.com/forum/index.php?showtopic=18… ↗

Who said anything about OpenCL. OpenCL and QE/CI are not dependent on one another. I believe the issue is simply that no one is willing to put the effort forth to get the 2600 series to work with QE/CI on Snow Leopard. And that is a damn shame.

@spockersI have a HD2400 PCI-e which doesn't have qe/ci under leo either, so I'm in the same boat. It will, however, play some video with Quicktime player, but since there's no hardware acceleration it uses the CPU and isn't nearly as smooth as 10.5.8. VLC won't play anything at all, oddly. I can't afford a new card, so I guess I'm stuck with…

This thread is specifically Snow Leopard. You are in the wrong place.

@jtillwickThis thread is specifically Snow Leopard. You are in the wrong place.

Sorry, I meant SnowLeo... it works great in leopard 10.4.8 and below.

@jtillwickI believe the issue is simply that no one is willing to put the effort forth to get the 2600 series to work with QE/CI on Snow Leopard. And that is a damn shame.

try it better youself

@max22try it better youself

Wow. You don't need to be rude about it. It is disappointing that a large number of people in the hackintosh community have to buy a new card to use Snow Leopard. No one is blaming any of the community developers for not fixing the problem, but the fact that there is very, very little out there to suggest that anyone is trying is a bit disheartening.

If I had the capability to help solve the problem, you can be sure I would be.

pc efi from netkas has 2600 and 3870 support now.
on netkas.org there is a install guide

don't think this is news, ati hd2600 is supported, but no QE -> still slow

Just unterstood that the 2600XT on the imac work because they are Mobility Chips.

@candykanepc efi from netkas has 2600 and 3870 support now. on netkas.org there is a install guide

From netkas:

• GraphicsEnabler now supports Radeon hd 2/3 series too, but only for Leopard
• Added GE support for 2600 and 3870 in snowleopard, need to remove x2000.kext to get reschange, other pre-4xxx cards need to be tested yet

Sounds to me like it doesn't enable acceleration, only resolution change, and I got that working on my 2400 long ago...

Is there no way to use a DSDT hack to get full QE/CI on the 2600 cards? I have a ATI 2600 XT and a 2600 Pro. If Snow Leopard only works with the mobility chipset, is there no way to do a firmware flash to get them working?

It is so frustrating that the AGP Nvidia 6200 I have works just fine with QE/CI, but my 2 newer ATI 2600 cards wont work, and most likely never will.