"Calibation failed with 2 attempts"
I've also tried to get Zephyroth 10.5.2 to work, but got some weird errors after the successful installation. After the first restart I was happy to see, that apparently everything was alright, so I could boot up via MBR... After the…
- Primary Author
- @anna Published 2008-02-29
- Collection
- Leopard 10.5
- Archival Footprint
- 3,916 historical reads · 3 curated field notes (from 6 dispatches) · 2008-02-29 – 2008-11-23
- Credited Voices (3)
- @anna (3)@art (2)@man_of_the_oak
I've also tried to get Zephyroth 10.5.2 to work, but got some weird errors after the successful installation.
After the first restart I was happy to see, that apparently everything was alright, so I could boot up via MBR...
After the spinner rotated for a while i got the "Restart your computer"-error, which is displayed in four languages. The same happened for me, as I tried to boot up using the "-x" bootflag
Next I tried the "-f" bootflag which caused a weird error:
EFI enhanced bootloader build: ToH
Using SMBIOS table found at 0x000fbdb0
Using ACPI RSDP revision 0 found at 0x000fa7c0
Hey we are going backwards! -> , restarting timing
Hey we are going backwards! -> , restarting timing
Calibation failed with 2 attempts
Before I decided to post it on this forum, I searched on the web and had a look on the wiki, but I couldn't find any solutions.
Does anybody have an idea or a hint for me, what could have caused these errors?
Author Updates & Technical Revisions
Follow-up dispatches by @anna
ok thanks for your answer, i'll try this after work tonight. if it solves the problem, we may add it to the "known issues" on the wiki.
Ok, after I turned off any power management options, the error disappeared. Thanks for that so far…
But when I try to boot up, I still get the "Restart your computer"-error, I also reported that on my first post.
So I tried to boot up with displaying diagnostic messages ("-v"). But everytime the boot process stops at a different point. The log doesn't go on, and I cannot hear any noise from my HD (which is usually that loud, that I can hear it working)
I also tried to repair the partition permissions etc., using the dvd. Any help?
Synthesized Community Field Notes
3 technical responses curated from 6 original dispatches
I have such problem - turn off ACPI 2.0 at bios (like all advanced power management options) and it works.
My hardware is 3200+ @ KT800Pro chipset
Try turn on only one core and use -v -x.
P.S ? ?-? ? ?, ?...
I've got the same problem, but not after installing, I'm just trying to install this, and still can't find a solution.
EFI enhanced bootloader build: ToH
Using SMBIOS table found at 0x000f1be0
Using ACPI RSDP revision 0 found at 0x000f7750
Hey we are going backwards! -> , restarting timing
Hey we are going backwards! -> , restarting timing
Calibation failed with 2 attempts
I have asus p5vd2-x motherboard. I have found an option to turn off acpi support but it's gray, so that I can't disable it. I've read somewhere over the net that it's due to Core 2 Duo E6300 processor which I own. I've tried also booting with "platform=X86PC", "acpi=off", "-v -x cpus=1" etc. but I couldn get it work. I've also tried just waiting about 1h in hope of getting it work... ofcourse it didn't help to. Can anybody help me? I am desperated :'(
p.s. tried with leo4all 10.5.2 and Kalyway 10.5.1
Sources & Contributor Provenance (3 credited usernames · Thread #555)
| Username | Dossier Contribution | Dispatches | Active Window |
|---|---|---|---|
| @anna | Primary Author | 3 | 2008-02-29 → 2008-03-05 |
| @art | Contributor | 2 | 2008-02-29 → 2008-03-06 |
| @man_of_the_oak | Contributor | 1 | 2008-11-23 |