iatkos 7 problem. need some help if possible

Just a quick note before i start: i am a complete newbie when it comes to macs but wanted to see what os x was like.

so i looked around and downloaded iatkos v7.

checksums:

CRC-32: ccc9a803
MD4: 0fed2a973984f11a840fe5ff44349fc5
MD5: 6395be5253f53f716ed042db1dd599f3
SHA-1: 4712b9a9354e3591974cfd3c6a453cec1157e5a5

i hope this is the official release as i could not find the official checksums to check.

I am using this old pc that I had under my bed. which could be why this aint working lol.

PC information using everest ultimate:

--------[ Summary ]-----------------------------------------------------------------------------------------------------
Computer Type ACPI x86-based PC

CPU Type AMD Sempron, 2000 MHz (10 x 200)3300+

Motherboard Name Abit NF8 Series

Motherboard Chipset nVIDIA nForce3 250, AMD Hammer

System Memory 1536 MB (DDR SDRAM)

DIMM1: Corsair Value Select VS1GB400C3 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)

DIMM2: 64MX64U-33B 512 MB PC2700 DDR SDRAM (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)

BIOS Type Award (06/14/05)

Communication Port Communications Port (COM1)

Communication Port Printer Port (LPT1)

Display:

Video Adapter NVIDIA GeForce FX 5200 (256 MB)

Monitor Samsung SyncMaster 911N/920N(x)/MagicSyncMaster CX918N [19" LCD] (HMCL307218)

Storage:

IDE Controller NVIDIA nForce3 250 Parallel ATA Controller
IDE Controller NVIDIA nForce3 250 Serial ATA Controller

Disk Drive HDT722516DLAT80 ATA Device (160 GB, 7200 RPM, Ultra-ATA/133)

Optical Drive Optiarc DVD RW AD-5170A ATA Device

Partitions:

C: (NTFS) 153.3 GB (134.7 GB free)
Total Size 153.3 GB (134.7 GB free)

Input:
Keyboard Standard PS/2 Keyboard
Mouse HID-compliant mouse

DMI BIOS Vendor Phoenix Technologies, LTD
DMI BIOS Version 6.00 PG

DMI Motherboard Manufacturer ab it.com.tw/
DMI Motherboard Product NF8/NF8-V (NF3 Series)
DMI Motherboard Version 1.x

Now the problem I am having is when I boot the dvd it boots fine to the bootloader. i type -v (also tryed -v cpus=1) then it comes up with an error which i have attached.

I am not sure what it is but I hope someone can point me in the right direction and BIG

Thanks again!

James