iatkos v7 SIS chipset from Intel on ASUS mobo problem "YOU MUST RESTART YOUR COMPUTER
I have a problem and i request your help. problem with iatkos v7 and SIS based chipset the chipset is northbridge sis672 and southbridge 968 vga chipset is sis mirage 3+ it's a lga 775 motherboard with core 2 duo CPU I have also an sata…
- Primary Author
- @zeekiller Published 2009-09-21
- Collection
- Leopard 10.5
- Archival Footprint
- 4,005 historical reads · 1 curated field notes (from 3 dispatches) · 2009-09-21
- Credited Voices (2)
- @zeekiller (2)@thorazine74
I have a problem and i request your help.
problem with iatkos v7 and SIS based chipset
the chipset is northbridge sis672 and southbridge 968
vga chipset is sis mirage 3+
it's a lga 775 motherboard with core 2 duo CPU
I have also an sata hdd but i have unplugged
i'm installing on a 40gb maxtor on ide
the dvd drive is connected to sata
the strange thing is that during the installation, there is no error messages ans it even say that install successfull
BUT
when the PC reboot, the hdd is detected and the bootloader start, we can hear the hdd and then the hdd stop (no noise) then the apple screen appear then within 20 sec it say "YOUS MUST RESTART YOUR PC…"
That's why i dont understand if the problem is from my HDD (ive tried the same installation with another IBM IDE HDD) OR it come from an incompatibility with the SIS chipset from my mobo
Why am I installing MAC OS, is because i love Leopard(i used it at office) but dont have enough money to buy a proper Mac
If you can help me, you are welcome...
Author Updates & Technical Revisions
Follow-up dispatches by @zeekiller
replaced with ideneb 1.4
actually i've tested ideneb 1.4 and it's working i mean the os installed and can boot.
now problems are with the integrated ethernet and my pci wifi card which are not suported.
Even the audio is not detected.
if there is a website for such driver... please let me know.
Synthesized Community Field Notes
1 technical responses curated from 3 original dispatches
Boot with -v or verbose mode in Chameleon.
Keep in mind HDs are not a problem, they are all the same, its the SATA or IDE controllers they are connected to which matter.
SIS chipsets are poorly supported, the SATA controller should work if you have AHCI mode, the IDE would need some support from AppleVIAATA or similar generic driver, if you installed it means at least some driver detected it but maybe never got installed.
Sources & Contributor Provenance (2 credited usernames · Thread #4170)
| Username | Dossier Contribution | Dispatches | Active Window |
|---|---|---|---|
| @zeekiller | Primary Author | 2 | 2009-09-21 |
| @thorazine74 | Contributor | 1 | 2009-09-21 |