Intel Core i7 - OSx86 supported

@ Anarchyw
What do you mean that you know ill only be using a single core?

Just to let you all know i have finally managed to get OS X 10.5.6 working on my computer and audio as well as graphics )
I did not manage to get my wi fi working but i have ordered this:
blue scale.co.uk/products/Airport-Extreme-11n-Wireless-Card-for-G3%7B47%7DG4%7B47%7DG5-Mac-OS-X.html
and should get it soon.

Finaly i also got iWorks '09 and it works great so im thinking of getting iLife '09 as well.

So basically this is a post to thank everyone who helped me out.

Thanks everyone,
Warren

PS if anyone needs help with a similar setup to mine than ask and ill try my best to help:)

Core i7 is supported since the Voodoo 9.5.0 kernel (long before Apple did it ), drivers for your Radeon 4850 you'll find here (osx86.rade onhd.eu/index.php?cid=1). Try the XxX 10.5.6 for installing, it worked perfectly for me and contains a 9.6.0 kernel. But there are no additional languages on this image, if you need one you have to install them later.

hey i posted something very similar, i have tried to look for other similar posts since the i7 is what people are generally upgrading to these days, the more popular a piece of hardware is the more they will develop distros to suit our hardware. Im getting XxX osx 86 as we speak and have been told by others with i7 core tech that it works flawlessly. I cant wait to get home and try for my self after distros like iPC iAtkos IDeneb etc. turned up bad and useless. BUT last night i used iAtkos and got a clean install - to my knowledge it worked fine, but i wasnt able to boot in (even trying the -x safemode option). Check my post Working Distro →...

if you have another distro besides XxX v2, try using this: im not expert but i know u'll only be using a single core...

at F8 boot installation type...
busratio=20 fsb=133 cpus=1 -v -f

core i7 - processor appears to the OS as eight CPUs (4 cores)

i finally got an installation to complete but when i went to restart and boot into the installation it kept restarting, so i used busratio=24 cpus=1 fsb=133 -v -f and then it gave me the error "using 10485 buffer headers and 4096 cluster IO buffer headers"…
Can someone with what kexts i need to replace and where i can get them from?

I'm looking for help:

1x 500 GB sata II
2x 250 GB sata II
Core i7 2.6 Ghz
3x 2 gig corsair 1300mhz
Ati Sapphire Radeon 4870 graphics card
Netgear pci-e wi fi card
Sata CDRW+/- DVDRW+/-

I installed iatkos 5i. Everything seems to be ok but there no sound, no network and i can't install parallels desktop.

i have Creative X-Fi Titanium Fatal1ty Pro which uses the EMU10k2 chipset that i cannot get to work...

@erick2redwhich audio devices do u have?

integrated audio devices from intel DX58SO motherboard

@kerciintegrated audio devices from intel DX58SO motherboard

i mean your audio chipset

@Anarchywi have Creative X-Fi Titanium Fatal1ty Pro which uses the EMU10k2 chipset that i cannot get to work...

cause i never heard about this chipset, all i can do is send you to here ↗ and hardware section of this page ↗

noone seems to be able to solve thier X-Fi audio in these forums or insanelymac either

yer i have not seen any drivers for this chipset in my searches, all i found was "ask Eugene, but he probably is too busy to do anything..."
fingers X'd 10.5.7 will do wonders

I have the Intel DX58SO Motherboard and after many trials and errors I got sound working. Read here for more info (uphuck.gg rn.de/forum/viewtopic.php?f=7&t=3680). Hope it helps you. Use KextHelper to install the kexts from that post.

@erick2redi mean your audio chipset

Chipset Intel X58 Express
Audio: Intel High Definition Audio subsystem in the following configuration:
10-channel (7.1) Dolby Home Theater* Audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Realtek* ALC889 audio codec