Kernel Panic on using NVinject drivers

Ok, you're right. i installed the latest release (10.5.2 rev2) and i have a geforce 7600 gs on agp-port running.
But just now, I recognized, that my graphics card is detected in system information under leopard as PCI connected!?

I followed the comments of this thread to find a solution, but can you briefly sum up (in some steps), what you exactly have done to get the nvinject drivers working? Maybe we could even add this issue to the wiki, if zephyroth agrees, that it might be helpful.
That would be very nice, thanks.

I've tried your guide farcaller, thanks so far. But I couldn't manage it to get it workin'

I feel helpless, do you have any idea what I have done wrong? Or what else can be responsable for this issue?
I think maybe I should post on the NVinject forums, it seems, that my NVCAP key is wrong.

Might help to tell us what graphics card you are using, what version of leopard?

I can't give you the info myself as I'm using pci, but I'm sure I've read issues about agp either on this forum or insanelymac, if you browse around I'm sure you'll find the info is here somewhere

When did you inject the Nvidia drivers, before or after the installation?

Ah, welcome to the club try "leo_vid_kexts.zip" from rapidshare. That might solve your problem. Might not.

I've got GeforceGo 7600 btw. It seems that 7600 series are troublesome.

7600's are troublesome. Sorry to say that, but its simply true.

@ WinLinMac01, I think, you are talking about 7950 not 7600. This card is absollutly supported, i have 3x7600, 1x7300 1x7950, and all are working perfect. Another thing is the laptop version (GO) or AGP version. Go here ↗ and take a look.

I have a GeForce 7600 GT and it's truly an out of the box experience I love it!

@farcaller, are you using nvinjectgo.kext and the correct device ID for your card?

In defence of winlinmac I've heard a few people complaining that they can't get their 7600gs to work.

I should really read what I am typing before I post. You are right, the 7950's are the cards that give people the pain, especially from what I've read. =))

excuse what I said.

my apologies

I need a cup of coffee, lol.

[cite] Ianxxx:In defence of winlinmac I've heard a few people complaining that they can't get their 7600gs to work.

In that case I'll take these words back then,
did someone mention coffeeee?

decaf , you? lolz

[cite] Ianxxx:[cite] Ianxxx:In defence of winlinmac I've heard a few people complaining that they can't get their 7600gs to work.

In that case I'll take these words back then,
did someone mention coffeeee?

[cite] WinLinMac01:decaf , you? lolz [cite] Ianxxx:[cite] Ianxxx:In defence of winlinmac I've heard a few people complaining that they can't get their 7600gs to work.

In that case I'll take these words back then,
did someone mention coffeeee?

lots and lots of caffine, hey I'm over 40 I need it!

Anyone having problems with there GFX could always try this solution
har docp.com/image.html?image=MTEyNjExMzE1M25saG1RZG1RZW9fMV8xX2wuanBn

thats understandable, , as a matter a fact, I'm going to consume some now. =)

I CAME UP WITH LOUNGE (THREAD) FOR THE FORUMS SO USERS CAN DISCUSS JUST ABOUT ANYTHING RELEVANT TO THE WORLD OF TECHNOLOGY. CHECK IT OUT.

global market as a matter of fact.

[cite] Ianxxx:[cite] WinLinMac01:decaf , you? lolz [cite] Ianxxx:[cite] Ianxxx:In defence of winlinmac I've heard a few people complaining that they can't get their 7600gs to work.

In that case I'll take these words back then,
did someone mention coffeeee?

lots and lots of caffine, hey I'm over 40 I need it!

[cite] roisoft:@farcaller, are you using nvinjectgo.kext and the correct device ID for your card?

Sure, but I've tried NVinject 0.2.1 (the one that doesn't requre device ID) with same problem. Without NVinject I do have 1024x768. With NVinject - 1280x800 but no QE/CI. With "leo_vid_kexts.zip" - QE/CI but menus do not render at all (black rectangles).

[cite] farcaller:[cite] roisoft:@farcaller, are you using nvinjectgo.kext and the correct device ID for your card?

Sure, but I've tried NVinject 0.2.1 (the one that doesn't requre device ID) with same problem. Without NVinject I do have 1024x768. With NVinject - 1280x800 but no QE/CI. With "leo_vid_kexts.zip" - QE/CI but menus do not render at all (black rectangles).

Are you using new kernel and no graphics update, just I got the black rectangles with that combo?

do the graphics update, add the correct id (only your device id, delete the others)into the info.plist for geforce, nvdaresman, nvda40hal, then use marvin utility for patch the opengl frameworks. Forget about the leonvidia kext, you want 10.5.2... don´t you?

I've got ToH 9.2.0 and graphics update from Rev1 (currently Rev2) DVD. The original GraphicsUpdate1 always panics the kernel. Without NVinject/wahtever I have failsafe mode, with it - native res, no QE/CI. With kexts from "leo_vid_kexts.zip" (unfortunately I don't know their origin) - black rectangles instead of menus, render bugs in Dashboard and mostly the mess in other places that use OpenGL.

I might haven missed something but is your device id definatly in geforce.kext and nvdanv40hal.kext?
If I miss my device id in one of these I get to change res but no QE CI

Leo_vid..._kexts are a 10.5 version and they are not compatible with the new opengl frameworks (10.5.2 graphics update) and they are causing all of your graphics problems (balck…). You can try this, download this (tiny url.com/39csng), extract and move the "patches" folder to the root do the graphics update again, boot with -s and type

mount -uw /
cd /patches
./replace.sh
./patcher cpuid.txt
./patcher cpuid-graphics.txt
reboot

edit the info.plist for your kext, nvdaresman, nvda40hal, geforce, and add only your device id, delete the others, copy into the extensions folder nvinjectgo open a terminal and type

sudo -s
(password)

cd /system/library/extensions

chmod -R 755 * && chown -R root:wheel *
cd ..
rm extensions.mkext
kextcache -a i386 -e
reboot

boot with -f -v

[cite] roisoft:Leo_vid..._kexts are a 10.5 version and they are not compatible with the new opengl frameworks (10.5.2 graphics update) and they are causing all of your graphics problems (balck…). You can try this, download this (tiny url.com/39csng), extract and move the "patches" folder to the root do the graphics update again, boot…

That's what I was thinking lol

Okay, I've installed GraphicsUpdate (and got a system freeze neary instantly after setup).
Rebooted in single mode, applied replace.sh, patcher cpuid.txt and patchr graphics-cpuid.txt (you seem to miss that, but this is the one cpuid that patches OpenGL).
Rebooted just to see kernel panic (GeForce.kext/NVDAResman.kext)
Rebooted in single mode, restored my Gf* and NV* stuff (from Rev2).
Rebooted, fixed IDs in NVDAHAL40, NVDAResman, GeForce and NVinject (noticed the side-effect of replace.sh - completely dead BT mouse).
Rebooted to see OSX in the state I've started from (not counting dead mouse, *sniff*).

Other ideas?

[cite] farcaller:Okay, I've installed GraphicsUpdate (and got a system freeze neary instantly after setup). Rebooted in single mode, applied replace.sh, patcher cpuid.txt and patchr graphics-cpuid.txt (you seem to miss that, but this is the one cpuid that patches OpenGL). Rebooted just to see kernel panic…

Why not put your device id's into the gf and nv from the upgrade, instead of replacing them?

Is that going to fix kernel panic?... ok, I'll try now (the truth is that I didn't remember ID, and lspci doesn't work in single mode).

[cite] farcaller:Is that going to fix kernel panic?... ok, I'll try now (the truth is that I didn't remember ID, and lspci doesn't work in single mode).

good luck don't know if it will work but I reckon its worth a go.

Erm... I just realised that I forgot to backup known "good" kexts. Seems that I'm not going back in this MacOS instance…

PS: gee, tried of tweaking Adium again and again...

PPS: have I coped correct kexts?.. Shouldn't be here by now

PPPS: gone reinstalling GU1 from scratch. btw OSX no longer detects my USB BT dongle...

i to also have had many problems with a 7600gs 512mb but its pcie.so i hope somebody can come up with a decent fix.

Latest update (installed kexts from GU1, fixed PCI ID). Result - black screen. Same black screen on external monitor connected to D-SUB, unfortunately I don't have anything DVI-like to plug to my DVI port.

do you have an vga port too or is plainly two dvi connectors?