nvidia gforce 310m

Which kext should I modify?
I've got my DEV ID, but don't know where to put it.

try the new apple macbook pro update 1.3 and still nothing.

some people got it to work with the earlier model of sony line laptop with leopard 10.5.?
maybe there still a chance, well keep looking.
any ideas or suggestions will be greatly appreciated.

@bujbotDo you think it is worth it to revert back to 10.5. from Snow Leopard for the QI/CL? I have a sony vaio as well, and I thought my Graphics Card wasn't being read properly because I didn't I have QI/CL.

I like to stay with Snow since my laptop support 64bit, but can't seem to get this graphic
card to work. What knid of Vaio do you have and everything is working for you?

@bujbotAny progress pbg4? I've done some research into the vaio LCD issue and it seems like it is affecting quite a few people. There were rumours of people trying to resolve the issue but I haven't found an update in a while. ... I have my sony running pretty well right now. Only issues come down to the graphics (that I've found so far). I…

Well, right now, my vaio boot into LCD with basic driver and one resolution. Hardware acceleration seem to work but no QE/CI, but when I've plug in my HDMI cable to an external display monitor, I've get better result, FrontRow work and Dashboard widgets, I get that ripple when adding a widget, but I can't seem to get that to work in my build-in LCD. I've used GraphicsEnabler=Yes with the new MacbookProUpdate. Oh!, the only way for me to get my build-in Display I have to use PCIRootUID=1 otherwise black screen and have to plug in HDMI cable. Well keep searching for solutions. Post your finding if you get anything.

@bujbotSo newest update for me. I reset everything video related to start again from scratch. I injected my device ID into NVDAHal50, NVDARESman, and Geforce kext's. I used ATY_init.kext ... although it is for ATI video cards, according to project osx86 wiki it should work. Put graphics enabled = n in the boot plist, and PCI root to 0. This…

Reinstalled Snow Leopard with the new Retail DVD v10.6.3. and apply the MacBookPro updates from Apple still get the same results. Just can't get the internal display to have QE/CI. Internal display show when I've added in device ID to NVDResman and NVDAHal50. Without adding my device ID to these two files, the internal display dosen't show and have to plug in HDMI cable. With device ID inserted ,my registry infos. show routing to Display B for internal display. Was looking into DSDT editing, but no luck. So nothing new for now. I'm going to try looking into NVCAP editing,maybe that might help.Well let you know how it's goes.Dose your Wi-Fi and sound works?

Apple now support Geforce GT330 so i'm sure you can modify the same kext with your correct ID's.

@atleeApple now support Geforce GT330 so i'm sure you can modify the same kext with your correct ID's.

I wouldn't be so sure about that. They are not the same. Geforce GT 330M has a GT216 core, while the Geforce 310M uses a GT218 one...

But it's ofcourse worth a try - to use those latest drivers that atlee mentioned you'll need to install this Update using Pacifist: support.apple.com/kb/DL1026?viewlocale=en_EN

Oh it's a sony with nvidia graphics, you can only get QE/CI on external screen, and not on the internal screen, sorry.

@scififan68Oh it's a sony with nvidia graphics, you can only get QE/CI on external screen, and not on the internal screen, sorry.

Are they still using those shitty display controllers, like those on the ealier Vaios?

@pbg4some people got it to work with the earlier model of sony line laptop with leopard 10.5.? maybe there still a chance, well keep looking. any ideas or suggestions will be greatly appreciated.

Do you think it is worth it to revert back to 10.5. from Snow Leopard for the QI/CL? I have a sony vaio as well, and I thought my Graphics Card wasn't being read properly because I didn't I have QI/CL.

@pbg4I like to stay with Snow since my laptop support 64bit, but can't seem to get this graphic card to work. What knid of Vaio do you have and everything is working for you?

I have the CW series laptop. It's the g210m card though, and I'm running SL in 32-bit. So far everything's running fine except sound (working on it now), wireless (although I have it working with a USB adapter), and graphic acceleration. The system profiler is finding the right information for the card, but I have no QE/CI, can't change resolution outside of the boot.plist, and can't control brightness.

I'm curious to know more about this issue with the sony screens.

I'm dual booting with windows and there's obviously no issues with the screen there.

@pbg4I like to stay with Snow since my laptop support 64bit, but can't seem to get this graphic card to work. What knid of Vaio do you have and everything is working for you?

Any progress pbg4?

I've done some research into the vaio LCD issue and it seems like it is affecting quite a few people. There were rumours of people trying to resolve the issue but I haven't found an update in a while. ...

I have my sony running pretty well right now. Only issues come down to the graphics (that I've found so far).

I was happy enough with no acceleration for the time being, but I didn't realize that the openGL affected 'preview', 'iphoto', 'VLC' etc.

So newest update for me.

I reset everything video related to start again from scratch. I injected my device ID into NVDAHal50, NVDARESman, and Geforce kext's. I used ATY_init.kext ... although it is for ATI video cards, according to project osx86 wiki it should work. Put graphics enabled = n in the boot plist, and PCI root to 0.

This gave me a black screen on the laptop, but plugging an external monitor into the HDMI port revealed perfect graphics acceleration. Quartz and everything.

So now I'm trying to figure out why it's routing the screen to the hdmi instead of the LCD. If I remove the NVDAResman.kext I get the LCD back but no graphic acceleration. So I looked into its kext package and noticed different arrays and what looked like display routing (NVidiaRM and NvidiaRMTwinView). ATY_init.kext appears to inject to a Display-A and a Display-B, so I replaced the NVDA,NVMac with NVDA,Display-A ... then I just got blackness with the LCD and external.

... so I'm going to look into it more. I need to find out what each display is being called with ... NVDA,Parent, NVDA,NVMac, NVDA,Display-A etc.

Any thoughts?

I have the older Vaio Z with the 9300m GS and I have this same problem, after I install the drivers only video out (VGA/HDMI) works and QE/CI does work, but the internal monitor is not detected and stays blank.

The only way to get anything on the internal display is to remove the drivers. On the Intel it is possible to get the proper resolution using Chameleon and the Graphics Mode option but still no QE/CI, I have not figured out how to get the proper resolution on the nVidia at all.

There are proper drivers for both sides on Ubuntu using the Sony-VGN-Zseries-janitor script, but it still only supports cold switching (have to reboot to switch the GPU), maybe this could somehow be ported to OSX.