PPPoE and Sound do not work
CPU Type DualCore AMD Athlon 64 X2, 2200 MHz (11 x 200) 4200+ Motherboard Name Phitronics AM2NIK-M Motherboard Chipset nVIDIA nForce 6100-4xx, AMD Hammer Audio Adapter Realtek ALC662 @ nVIDIA MCP61 - High Definition Audio Controller…
- Primary Author
- @jajunior Published 2008-09-04
- Collection
- Leopard 10.5
- Archival Footprint
- 3,285 historical reads · 1 curated field notes (from 4 dispatches) · 2008-09-04 – 2008-09-05
- Credited Voices (2)
- @jajunior (3)@Voyn1x
CPU Type DualCore AMD Athlon 64 X2, 2200 MHz (11 x 200) 4200+
Motherboard Name Phitronics AM2NIK-M
Motherboard Chipset nVIDIA nForce 6100-4xx, AMD Hammer
Audio Adapter Realtek ALC662 @ nVIDIA MCP61 - High Definition Audio Controller
Network Adapter NVIDIA nForce Networking Controller
nVIDIA MCP61 - LAN Controller (PHY: Broadcom AC131)
All good, but PPPoE dont work. Just "connecting, connecting" and dont connect. What could be? Sound dont work, too.
Author Updates & Technical Revisions
Follow-up dispatches by @jajunior
Sorry for miss, yes I'm using Zephyroth 10.5.2. I will try this forcedeth and post result after.
Thanks and appreciate for suggestions.
@Voyn1xAs you are posting in the Zephyroth forum i presume you are running Zeph's 10.5.2, I would switch to Leo4All or LawlessPPC which has much better driver support. That said you can try the attached nvidia LAN driver, you should remove your existing forcedeth.kext beforehand to prevent conficts. If this fails try setting your ip manually…
Talking about LawlessPPC, have it only SSE3 processors support? My Atlhon X2 4200+ only have SSE2.
PPPoE still don't working. "Can't find a PPPoE service". But when a try to connect in MacOS, I can't connect in Windows in first boot, on rebooting Windows again.
Could be anything with card or its just config?
Synthesized Community Field Notes
1 technical responses curated from 4 original dispatches
As you are posting in the Zephyroth forum i presume you are running Zeph's 10.5.2, I would switch to Leo4All or LawlessPPC which has much better driver support.
That said you can try the attached nvidia LAN driver, you should remove your existing forcedeth.kext beforehand to prevent conficts. If this fails try setting your ip manually instead of using DHCP.