I've been running an x2 6000+ with an 690g/sb600 on 10.4.9 smooth as for ages now. SataII was an issue. I set or disabled AHCI (I think, from memory) in BIOS and had to use a jumper on the drive to half the speed. worked but not very stable so I just got a USB enclosure!

As for 10.5.2 i've installed now but it's not as stable as I'd like (as 10.4.9).

cgsheen: You say you used a different method? What method would that be? I've used 9.1.0 kernel with via chipset drivers from Zeph's 10.5.2 Rev1(i think)

---

My Hackintosh:
Kalyway 10.5.2 Intel/Amd -- Speedstep, Netkas Smbios, AMD test patch 2.
Mobo: MSI K9AGM2
Chipset: AMD 690v ATISB600 -- SB600ATA kexts
CPU: 3Ghz AMD Athlon 64x2 6000+
Ram: 2gb Rambo DDRii 667
Graphics: Nvidea MSI nx8600GT 512MB -- NvInject 512 (fully supported 100% working)
Audio~External: Focusrite Saffire -- (100% working - ootb)
Ethernet: 8101E -- Realtek R1000 (100% working)
HDD: 320GB WD SataII (150gb Boot Partition)
150gb Lacie Firewire/USB RIP my dear Lacie.