#1
|
|||
|
|||
ALC892 solution needed for Asus M4A89GTD PRO/USB3 mobo
Hello!
This is my first post on a osx86 subject! ^^ I have successfully installed 10.6.6 with Internet enabled and a resolution of 1400x1050 coming from my integrated Radeon HD 4290. My AMD Phenom II 3.2GHz 1090T 6 cores are enabled, but 64 bit kernel is impossible to install. However, 32 bit kernel works very nice and applications can be run in 64 bit mode. I have a Sapphire Radeon HD6950 and I know no drivers exists for this (yet :P). Runnig it on the current resolution is ok for me. The only thing I would like to enable is the audio, and for the moment I had no success. The audio present is the ALC892 chip. I tried two methods.
So in fact I am looking for a good guide to install them or a better driver that ensures good sound quality. I tried every method found on the web related to the ALC892 chip AND the ones related to the ALC8xxHDA method. None of them gave me a good sound quality! Also tested on both green rear port and front port without success. Could somebody tell me their experiences with this ALC892 on my same mobo or your way to install it? I am willing to write the driver myself! if not too difficult or enough resources are provided I don't nothing about this stuff, but I am a java developer with some basi unix skills so never say never Btw, I love snow leopard |
#2
|
||||
|
||||
Shouldn't you install VoodooHDA?
Which kernel you are using? I'm just going to install Hazard's 10.6.2 for AMD. Should I check "Legacy Kernel 10.2.0" on options page? And Chameleon RC4? |
#3
|
|||
|
|||
I did install voodooHDA, but the sound is still no good. it is not acceptable. do you have an alc892 audio chpiset?
I'm using the snowleo distro (not the hazard one!) with 10.6.6 update with legacy kernel 10.6.6. for sure use the chameleon RC4, for the kernel I can't advise you as I don't know which system you have. ciao |
#4
|
||||
|
||||
I'm using legacy kernel 10.6.6. SL updated to 10.6.7.
I've the the same mobo as yours - M4A89GTD PRO/USB3. Snow can see my processor, as "Unknown" but correct speed and all six cores (AMD Phenom II X6 1090T). It can also see all of my RAM - 16GB DDR2. GTX460 is working at full speed and resolution. Here are my current problems: - System won't run without -force64 flag - No audio (tried with both, voodoohda and alc892 kexts) - I'm not able to run Kext Utility - Firefox and Safari are freezing often |
#5
|
|||
|
|||
if you don't have the snowleo distro I can't help you...
for the audio, if you use voodoohda272 it will work with snowleo distro AMD Phenom II x6 3.2 GHz 1090T °°°° Sapphire Radeon HD 6970 2GB DDR5 (BIOS 6950) °°°° Corsair Dominator 4 x 4GB RAM 1.6 GHz DDR3 XMP (CMP8GX3M2A1600C9) °°°° Windows 7 Ultimate 64bit |
#6
|
|||
|
|||
I have the same mobo (M4A89GTD PRO/USB3) and processor (AMD Phenom II X6 1090T) i am running SL 10.6.8 with legacy_kernel 10.6.8
@Fabiuzi, you need AppleAzaliaAudio and the problem will be gone @maya77, to run Kext Utility and other programs without crashing, you must leave just 4GB RAM I am looking also for something to fix this (to run all without crashing with 16GB RAM) but till now I did not have any success |
#7
|
|||
|
|||
Quote:
Code:
maxmem = 4096 Excuse my English, I'm Italian 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |